EasyPet EP-180R User Manual - How The System Works

Manual is about: Rechargeable MultiDog remote training system

Page of 10

Download

Print this page

Bookmark us

•

1 x Test bulb for testing static shock correction;

•

1 x Min screw driver for installing 6F22 9V battery on transmitter;

•

1 x User’s manual (English).

How the System Works

Consistent and correct use of this remote dog trainer allows you to reinforce commands and correct misbehaviour from up

to 500 meters. There are 50 groups of warning tones that can be used for praise, warning or silent recall. Or use the

remote transmitter to send a signal, activating the collar receiver to deliver a vibration correction or a harmless stimulation.

It has 10 levels of vibration corrections and 99 levels of static intensity so you can find the best level for your dog’s

temperament and the type of training you do.

More Information about Static Pulse Correction

The 99 levels of static pulse correction include 10 degrees of intensity (from weakest to strongest). Each degree of static

intensity is divided by 10 different correction durations (from 200ms to 2s). For example, for level 1 of static pulse

correction, it has the weakest static pulse intensity and the shortest correction duration (200ms). While at level 10, it has

the weakest static pulse intensity (same as level 1) and the longest correction duration (2s). For level 90 to level 99, it has

the strongest static pulse intensity with different correction durations (from 200ms to 2s).

Important:

This remote dog training system has a range of up to 500 meters. Depending on the way you hold the

remote transmitter, the maximum range may vary. For consistent results at longer ranges, hold the remote transmitter in a

vertical position away from your body and above your head. Terrain, weather, vegetation, transmission from other radio

devices, and other factors will affect the maximum range.

Quick Start Guide

Step 1: Prepare the Remote Transmitter

Transmitter is fitted with battery. To switch on the transmitter, press and hold ON button (+) on the transmitter for

about 3 seconds. To switch it off, please press and hold OFF button () for about 3 seconds. Important: If there is

only one bar left on the Remain Battery Icon on LCD display, it means the battery is running down and need to

be replaced.

(How to replace battery for the transmitter: unscrew the battery compartment cover using the supplied mini screw

driver. Follow the positive (+) and negative () signs inside the transmitter battery compartment and on the 6F22

9V battery and insert the 9V battery into the transmitter correctly. (Improper installation will cause damage!)

Screw the cover back tightly.)

« ‹ Prev 1 2 3 4 5 6 7 Next › »

Summary of EP-180R

Page 1
Easypet ® ep180r user’s manual rechargeable multidog remote training system advanced model of 500 meter remote range compact, lightweight, and convenient! Please read this manual thoroughly and carefully before operating. Thank you for purchasing an easypet® ep180r remote dog training system. Thi...
Page 2: How The System Works
• 1 x test bulb for testing static shock correction; • 1 x min screw driver for installing 6f22 9v battery on transmitter; • 1 x user’s manual (english). How the system works consistent and correct use of this remote dog trainer allows you to reinforce commands and correct misbehaviour from up to 50...
Page 3
Important: if there is only one bar left on the remain battery icon on lcd display, it means the battery is running down and need to be replaced. Button information details:.
Page 4
Step 2: charge the collar receiver (caution! Always use the supplied power adaptor to charge the receiver.) lift the small rubber tab on the receiver to access the charger port. Plug the supplied wall charger to into the wall socket and into the charger port of the receiver. A red led light is visib...
Page 5
Please make sure the collar receiver is in fully working order before putting it on your dog! Let’s take dog a collar receiver for example: to test the vibration function, press the vibration button on the transmitter and the below icons will appear on the lcd screen: it means dog a is selected and ...
Page 6: Important:
It means dog a is selected and the static shock is on level 1 (the weakest level). There are 99 levels of static stimulation and level 99 is the strongest level. Attach the supplied test bulb to both of the metal prongs on the collar receiver. Press t button to send out shock signal to dog a collar ...
Page 7: General Training Tips
Find the best intensity level for your dog this remote training system has multiple intensity levels. This allows you to choose the stimulation that is best for your dog. Always start at the lowest level and work your way up. For training efficiency, it is important to find the right intensity level...
Page 8: Frequently Asked Questions
• be consistent. Give your dog a tone or a vibration or stimulation with each misbehaviour. • do not overcorrect your dog. Use as few stimulation as possible to train your dog. • restrict your dog from situations in which he has a history of misbehaving unless you can supervise him and use the remot...
Page 9: Troubleshooting
A: we do not recommend any of our products to be used on aggressive dogs. We recommend you to consult your local veterinarian or professional trainer to determine if your dog might be aggressive. Q6: what do i do if my dog’s neck becomes red and irritated? A: this condition is due to the contact poi...
Page 10: Important:
Important: as this product is a wireless transmitting apparatus, you must not use the remote control system in places like petrol stations or hospitals where mobile phones are prohibited. Patients using heart pacemakers are forbidden to use this product..