- DL manuals
- Easypix
- Digital Camera
- GoXtreme WiFi Control
- User Manual
Easypix GoXtreme WiFi Control User Manual - page 20
19
In Playback mode, press the Power button
to switch between photos and videos. When there are
several photos or videos, press the Wi-Fi button
to select the photo or video. When a video file is
selected, press the Shutter button
to play it, and press the Shutter button again to stop playing.
In Playback mode, press and hold the Shutter button
, a prompt of deleting the file or formatting will
appear. Press the Wi-Fi button
to switch between deleting or formatting, then press the Power
button
to select Yes or No, and press the Shutter button
to confirm and exit.
Summary of GoXtreme WiFi Control
Page 1
User manual.
Page 2
1 thank you for buying the goxtreme wifi control action camera. Before start using this product, please read this manual carefully to maximize its performance and extend the life of the product. Appearance and buttons.
Page 3
2 1. Shutter button 8. Micro usb port 2. Microphone 9. Mini hdmi port 3. Lcd display 10. Micro sd card slot 4. Lens 11. External microphone 5. Wi-fi switch and status indicator 12. Battery cover push switch 6. Power / mode button 13. Led light 7. Infrared signal reception light.
Page 4
3 lcd display illustration turn on the goxtreme wifi control, the lcd will display the following status and settings: 1. Camera mode 2. Video recording mode (default) 3. Wi-fi icon (display when enabled) 4. Tf card icon (display when loaded).
Page 5
4 5. Resolution icon: in camera mode, hi stands for 8 mega pixels (3264x2448), and in video recording mode, it stands for fhd (1920x1080,30fps); in camera mode, lo stands for 5 mega pixels (2592x1944), and in video recording mode, it stands for 720p (1280x720,30fps); hilo only displays in video reco...
Page 6
5 working mode flow chart after turn on the goxtreme wifi control, you can press the power/mode button to switch the following modes in turn: camera mode (8mp) camera mode (5mp) video mode (720p ,60fps) video mode (720p,30fps) video preview mode (1080p default).
Page 7
6 in video mode, press the shutter button to start recording, led flash, and press it again to stop; in camera mode, press the shutter button to take photo. Use your goxtreme wifi control when you use the goxtreme wifi control for the first time, please: 1. Insert a micro sd or micro sdhc card, as s...
Page 8
7 2. Install the battery please install the lithium battery correctly as shown in the following picture. Picture 1 picture 2 picture 3 picture 4 step 1. Push the battery cover switch to the lock position( ),and remove the battery cover. Step 2+3. Put the battery into the battery slot. Make sure that...
Page 9
8 3. Charging the battery. The dv uses a rechargeable lithium battery. When the dv is off, connect it to the pc via usb cable to charge the battery. During charging, the status indicator (blue) will light on, and the indicator off when charging completes. Note: when the dv is on, connecting it to th...
Page 10
9 2. Turn off: press and hold the button for about 3 seconds, lcd displays “off” and a beep can be heard from buzzer. Note: the dv will turn off automatically if it is idle for 5 minutes. Start to use default setting: after turn on the goxtreme wifi control, the default setting is as below:.
Page 11
10 video recording mode icon the dv is in video recording mode. Hi video resolution fhd: 1080p@30fps recording time stands for 0 hour and 00 minute. Tf card icon display when a tf card is inserted, otherwise no display. Battery level battery is full.
Page 12
11 mute icon the dv is in mute mode, no beep will be heard when pressing the buttons. It displays only when mute mode is activated. Wi-fi icon display when activated. The goxtreme wifi control provides different shooting modes. Press the button repeatedly, the following mode will display in turn: vi...
Page 13
12 photo hi stands for 8m (3264 x 2448) resolution lo stands for 5m (2592 x 1944) resolution continuous shot the dv supports taking 3 photos continuously (only via app) self-timer in self-timer mode , you can set 0s, 2s or 10s (only via app).
Page 14
13 1. Video to record a video, please check whether the dv is under video mode. If the icon is not displayed on the screen, press the button repeatedly until it appears. Start recording: press and release the button, the icon and [:] displayed in lcd will flash. At the same time the red indicator wi...
Page 15
14 2. Photo to take a photo, please check whether the dv is under camera mode. If the icon is not displayed on the screen, press the button repeatedly until it appears. Press and release the button, a beep will be heard and the red indicator will flash, meaning a photo is taken.(if you take photos m...
Page 16
15 4. Enable/disable mute mode the buzzer is enabled by default. Under the video or photo mode, press and hold the shutter button to disable the buzzer and indicator to enter mute mode. Under mute mode, the icon will display on the screen; press and hold the shutter button again to exit mute mode. W...
Page 17
16 5. Connecting to hdtv 5.1 connect the dv to hdtv via hdmi cable (optional) if you need to transfer the image and audio to an hdtv for playback, insert the com end of the hdmi cable to the dv, and the other end (output) to the hd input of the hdtv, as shown in the following figure: buzzer is enabl...
Page 18
17 note: before connecting or removing the hdmi cable, please stop video recording, playback and disconnect wi-fi first..
Page 19
18 5.2 when hdtv is connected, it enters playback mode, the lcd displays as below: s/n icon name description 1 playback mode under playback mode currently. 2 file number there are 31 files and you are viewing the 19 th one. 3 video icon the file is a video. 1 2 3.
Page 20
19 in playback mode, press the power button to switch between photos and videos. When there are several photos or videos, press the wi-fi button to select the photo or video. When a video file is selected, press the shutter button to play it, and press the shutter button again to stop playing. In pl...
Page 21
20 6. Connecting to pc 6.1 turn on the dv and connect it to the usb port of the pc via the attached usb cable. The dv will enter u-disk mode and the lcd will display as below after connection: now you can view the photos or videos taken by dv on pc..
Page 22
21 note: after the dv connecting to pc to enter u-disk mode, you will see two removable disks displayed in my computer of windows, one is the tf card, storing all the photos taken and video recorded by users; the other one stores the system file information, including a file named ssid_pw.Cfg, conta...
Page 23
22 remote controller application buttons instruction you can use the remote controller to record videos, take photos and shut down the dv. When using the remote controller, aim the signal emission port to the infrared signal reception light of the dv, and press the video button, photo button or powe...
Page 24
23 app (support android and ios) 1. How to install an app 1.1 search for ”symagix” in google play (for android os),or scan the qr code printed on the gift box to find the app and install it according to the instruction. Infrared signal reception light.
Page 25
24 1.2 search for ”symagix” in app store (for ios) or scan the qr code printed on the gift box to find the app and install it according to the instruction. 2. Android app 2.1 install symagix app (provided by dealer or via internet) on android phone or tablet. When installation completes, the lcd wil...
Page 26
25 2.4 click the icon in the app list of the android phone or tablet to open it. Now you can preview the image sent by the dv on the phone or tablet and start some operating. The operation interface on terminal is shown in the following figure. 1. Video resolution 2. White balance 3. Setup (enter se...
Page 27
26 3. Ios app 3.1 install symagix app (provided by dealer or via internet) on ios phone or tablet. When installation completes, the lcd will display icon . 3.2 insert the tf card and turn on the dv, then press the wi-fi button to enable it. Now you can see the wi-fi icon on the lcd. 3.3 enable wi-fi...
Page 28
27 1. Dv battery icon 2. Video resolution 3. White balance 4. Setup (enter setup menu) 5. Enter playback mode 6. Shutter button 7. Photo mode 8. Video mode.
Page 29
28 note: 1. A tf card must be inserted if you need to take a photo, record a video or download files on the terminal. 2. The wi-fi indicator will remain on when the terminal is connected to dv..
Page 30
29 declaration of conformity easypix herebly declares that the product goxtreme wifi control is in conformity to all the essential requirements of directive 1999/5/ec. The declaration of conformity can be downloaded here: http://www.Easypix.Info/download/pdf/doc_goxtreme_wifi_control.Pdf for technic...