EasyPro EX4500 Installation And Service Manual

Summary of EX4500

  • Page 1

    Ex4500 & ex6100 reliability you can count on! © 2010 easypro, inc pg. 1 installation and service manual warning: please read completely before you install or operate your new pump! This is an external “out-of-pond” pump! It is not submersible! Do not allow this pump to become submerged! Never run dr...

  • Page 2: Ex4500 & Ex6100

    Ex4500 & ex6100 reliability you can count on! © 2010 easypro, inc pg. 2 installation please read carefully! When properly installed the ex series pump will provide dependable trouble-free service. 1. Locate the pump as near the water source as possible. A fl ooded suction situation is preferred. The...

  • Page 3: Ex4500 & Ex6100

    Ex4500 & ex6100 reliability you can count on! © 2010 easypro, inc pg. 3 pump end assembly 1. Clean and inspect all pump parts (0-ring, seal seats, motor shaft, etc.). 2. Apply sealant to the bracket bore id wall and around the seal case - follow sealant mfg. Instructions. We recommend using gas- gac...

  • Page 4: Ex4500 & Ex6100

    Ex4500 & ex6100 reliability you can count on! © 2010 easypro, inc pg. 4 maintenance lubrication motor - permanently lubricated ball bearings - no service required. Rotary seal - requires no lubrication after assembly. Symptom problem resolution no flow insuffi cient prime prime system with water and...