Owner’s manual 5000 youth.
Table of contents introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-15 using your ea...
Congratulations on your purchase of the easystand 5000 youth standing frame! We at altimate medical, inc. Have designed the easystand 5000 youth with your comfort and happiness in mind. This manual is an integral part of your standing system and should be read completely and thoroughly by anyone tha...
• the easystand 5000 youth is designed to accommodate most individuals from 4’- 5'6" (122cm-168cm) and up to 180 lbs (82kg). If you do not meet these specifications and have not been properly fit by a qualified therapist or physician, altimate medical inc. Does not recommend that you use the easysta...
Depending on what base style you ordered you will have either level glides (standard), casters, or the mobile option. Turn the base over as shown and locate the enclosed tool package. Many of the pictures in this manual show the optional ratchet handles. You may have the standard knobs. If you order...
The front level glides (with adapters) must be tightened securely onto the frame as shown. Level glides will come with anti-tips when ordered with the clear desk table. Position the anti-tip between the level glide and the adapter pointing outward. After attaching adapter thread the level glide in s...
The front casters (with adapter ) must be attached securely into the frame as shown. (fig. A) then thread the caster completely into the adapter with the enclosed wrench. The anti-tips must be installed when used with the clear desk table. (fig. B) if you ordered the mobile option, install the two c...
With your unit in the upright position, remove the quick pins. Place h-frame into base with kneepad bracket facing inward. Replace quick pins. Attach the kneepad and tighten securely. Caution: keep kneepad in the lower position, when not in use, to avoid possible injury. If you ordered the independe...
To install the table, loosen the h-frame knobs slightly, be sure the front pad bracket faces toward the seat. Note: if you ordered the clear desk table the front anti-tips must be installed as in step #7. Insert the table into the h-frame and push the spring button to continue installation. Tighten ...
The actuator handle can be installed on the right or left side. Attach the actuator handle so that the handle is near vertical. Use the enclosed allen wrench and a multi-use wrench. Tighten securely. If you ordered the removable actuator handle it can be removed by loosening the knob as shown. #16 #...
To install the back option, loosen the quick adjust knob on the square tube. Press the spring button on the lower following arm and insert it into the round corresponding tube. Continue pressure until you hear the spring button "click". Slide the upper square back tube into the corresponding seat ad...
To install the seat, first raise the seat by pumping the actuator handle. The bolts for the seat are found in the seat. Remove bolts and place the seat onto the frame, narrow end toward the rear of the unit. Tighten securely. Lower the seat by applying weight and pulling back gently on the actuator ...
Side supports mount under the seat. Loosen the quick adjust knob and depress the spring button. Hip guide will snap into maximum width. (picture shown is side support with optional padded hip guide.) note: if you ordered the high back extension go to #27. Attach the back pad and tighten securely. If...
To adjust the footrests, loosen the knobs and pivot the foot rests forward, then tighten securely. If you ordered the high back extension with the optional chest vest, it comes assembled. Install it like you would the high back. If you ordered the chest vest with the low back, attach it to the back ...
If you ordered laterals with the low back, attach them the same way as the chest vest. You must either widen or remove the pad brackets for ease in installation. Note: the quick adjust knobs go to the top (see fig. #32). If you have the high back extension with laterals, install the high back onto t...
If you are using it with the whitmyer pro receiver, pro-ms, pro-md or the soft/plush series receiver #m1012, use the four bolts supplied by whitmyer to attach your headrest. For use with the stealth ® , otto bock™ or whitmyer #m0012 detachable mount, you must remove the auxiliary mounting plate. If ...
If you are using the otto bock™ or stealth ® headrest, use the two of the provided buttonhead bolts to fasten their hardware as shown. Here is the 5000 youth shown with casters, ratchet handles, padded hip guides, table swing-away sleeve, clear desk table, independent kneepads, anti-tips and back op...
Page 16 using your easystand using your easystand adjusting seat depth/back angle • to adjust the seat depth, first loosen the quick adjust knob on seat tube. Then depress the spring button on the square tube and position the seat to desired depth. After adjusting, tighten the quick adjust knob secu...
Page 17 p using your easystand transferring • for proper transfer techniques, please seek professional advice from your therapist or doctor before transferring. • always lock the wheel locks on your wheelchair and all four casters on the easystand before transferring. • if you do not need assistance...
Page 18 using your easystand standing • please consult with your therapist or doctor before starting a standing program. • once transferred into the easystand, position your feet and the knee support and secure any straps. Push the pump handle forward with 15-25 strokes. The seat will slowly rise in...
Page 19 p using your easystand maintenance general • clean the easystand 5000 with a mild non-abrasive disinfectant or soap and water. • check your easystand periodically to make sure that all nuts, bolts and adjustable parts are tightened securely. The hydraulic actuator • an initial break-in perio...
Page 20 parts detail 5000 youth option overview easystand parts detail 1 14 26 27 28 28 33 33 29 30 30 37 37 40 43 42 34 29 38 40 38 45 44 41 31 31 31 41 44 44 44 42 41 41 34 32 32 43 36 35 36 35 page#.
Page 21 p parts detail 5000 youth basic frame.
Page 22 parts detail level glides #10126 locking casters #5062.
Page 23 p parts detail actuator handle #58483 mobile option #5200y.
Page 24 parts detail actuator handle extension #5022 removable actuator handle #5020
Page 25 p parts detail foot straps #80634 foot holders #80635 secure foot option #80616.
Page 26 parts detail standard knee pad #10128 independent knee pads #5026.
Page 27 p parts detail black molded table #10600 clear desk table #5041.
Page 28 parts detail oversized table option #5040 no-table option #5250
Page 29 p parts detail tilt table for molded table #81011 tilt table for oversized table #80997.
Page 30 parts detail tilt table for clear table #80996 roho seat set #81020
Page 31 p parts detail table swing-away-sleeve #5024 arm troughs #5030
Page 32 parts detail back option #5100y.
Page 33 p parts detail removable back option #5100yr.
High back w/chest strap #5150 lateral supports #5036 page 34 parts detail.
High back universal receiver #80643 high back head support #5032 back head support #7030 back universal receiver #80642 page 35 p parts detail.
Universal headrest receiver #80608 shoulder retractors #5034 page 36 pats detail.
Page 37 p parts detail no back option #58582 hip guides #5038y.
Page 38 parts detail large chest strap #51600 small chest strap #51601 medium chest vest #80632 large chest vest #80633 small chest vest #80631.
Page 39 p parts detail seat belt #51500
Health benefits page 40 health benefits improved trunk strength and balance natural alignment of internal organs improved renal & bowel function sustained rom decreases spasticity allowing for improved positioning and comfort strengthen cardiovascular and respiratory systems range of motion (spine, ...
User log photo copy this page for a long term record of your standing progress client name start time date end time total time page 41 p user log.
4’0”-5’6” 122-168cm 180 lbs. 82kg 14”-18” 36-46cm 19.5” 49cm 11”-19” 28-48cm 2’-10” 5-25cm 12”-26” 31-66cm 3”-5” 8-13cm 8” 20cm 26.5”x33” 68x84cm 121 lbs. 55kg black powder coat graphite gray 19.5”x20” 50x51cm 20”x25” 51x64cm specifications page 42 specifications height range weight limit seat depth...
Limited warranty this warranty is extended only to the original purchaser/customer (or dealer non consumer who does not buy or resell). Altimate medical, inc. (ami) warrants the easystand 5000 youth against defects in materials and work- manship as listed below. • steel frames - 5 year warranty • hy...
Easystand products are manufactured by altimate medical, inc. A small company with a big heart, based out of morton, minnesota, altimate medical is proud to have been helping people stand for fifteen years. If you have any stories or comments about standing please write us at the address below. Than...