EasyTig Easytig 200AC/DC Operation Manual - page 3
3
Introduction
The EasyTig series of Welders is a revolutionary new approach to Welding
technology. Easyweld introduced a more efficient way to manufacture top
quality machines while keeping the cost of operation and repairs lower. This was
accomplished using several new approaches to the mainstream technology. One
of these methods is our proprietary plug & play main circuit boards which allows
ease of repair, reducing the downtime to only hours rather than days, while also
reducing repair costs averaging less than $75! The TIG AC/DC Series uses
special safety redundant circuitry with built in auto-protection and self adjusting
circuitry to keep your machine running in a safe threshold. This helps protect
your machine from over-voltage, power spikes, burn-outs and shorting.
Warranty
The machine is insured against damage upon shipping. If you machine is
damaged in any way when you receive it, you must retain all shipping materials
and packing. Call our customer service department and report the damage
immediately.
There is a 1 year warranty on all internal electronic parts. The torch, power cord,
clamps, air regulator, hoses, case & paint and consumables and cables are not
covered under warranty. You must use dry gas in your machine and keep it
indoors away from rain and moisture.
This machine is designed to operate from 200-240VAC/380VAC at 50-60Hz Only.
Operating outside of limits will void warranty.
Warranty coverage covers repair or replacement of damaged machine or
damaged circuit board. Warranty does not cover shipping from the customer but
does cover return shipping within the Cont. United States. If you are going to
return a machine to us for repairs, it must be well packed and insured.
Customers who own machines that require warranty coverage should contact
our warranty department by email at
info@hkweld.com
to obtain a return
authorization code.
Customers who own an out-of-warranty machine that require repairs should
contact us for an estimate.
WARNING!
You may be faced with dangers during the course of welding, so please be
careful and read the manuals carefully before working.