Euroaudioteam, s.R.O. Instructions for use eat forte s.
2 dear music lover, welcome! Congratulations on your purchase of our eat forte s turntable. Your eat forte s was hand-crafted by our team of skilled technicians. It has been tested rigorously and is ready for your enjoyment. Please take the time to read this manual carefully, to ensure that you obta...
3 eat forte controls, features and connections 1 main turntable chassis 2 platter 3 2x drive belt 4 speed control 5 arm board and spirit level 6 4 x adjustable feet 7 record weight * grounding cable (not shown) * power supply (not shown) * gloves (not shown)* grease (not shown)* small tool set (not ...
4 set-up for safe and trouble-free installation, we would suggest that you assemble the unit with the assistance of a friend, due to the weight of the complete turntable system. 1) open the shipping crate by unscrewing the top of the crate. Remove the wooden top. 2) remove the styrofoam top layer, w...
5 useful tips the base and the record player should be positioned on a low-resonance surface, such as wood or multiple-layer ply board, to avoid structural vibrations disturbing replay. Mains power connection the turntable is supplied with a power supply suitable for your country's mains supply. Che...
6 pro-ject 12cc evolution tonearm 1 2 4 3 5 6 7 7a 8 9 cartridge downforce adjustment (pro-ject evolution tonearms) remove the transport lock (3) from the tonearm. Store it in the original packaging so they are available for any future transportation. Pushing carefully, turn the counterweight (7) on...
7 adjusting the azimuth (pro-ject evolution tonearms) the cartridge stylus must be vertical in the record groove in order to trace the groove wall modulations correctly. A small screw at the bearing end of the arm allows incorrect azimuth to be corrected if your stylus is not mounted exactly perpend...
8 ortofon rs tonearms 4 2 3 7 1 5 6 8 cartridge downforce adjustment (ortofon rs-tonearm) remove the transport lock (3) from the tonearm. Store it in the original packaging so they are available for any future transportation. Set the knob (5) to 0. Place the counterweight (7) halfway along the count...
9 if it is not, loosen the hexagon screw in the tonearm base (8 rs tonearms or 7 as tonearms) just enough to allow vertical movement of the arm pillar without force and slide the arm up or down until it is parallel. Carefully retighten the hexagon screw without applying excessive force (which would ...
10 service should you encounter a problem which you are not able to correct or identify despite the above information, please contact your dealer for further advice. Only when the problem cannot be resolved there should the unit be sent to the distributor in your country. Guarantee repairs will only...
