Powerware 9170 + rail kit 9- and 12-slot cabinets installation guide ®.
Powerware is a registered trademark of eaton power quality corporation. Torx is a registered trademark of textron, inc. Ecopyright 2002-2006 eaton corporation, raleigh, nc, usa. All rights reserved. No part of this document may be reproduced in any way without the express written approval of eaton c...
Eaton powerware ® 9170 + rail kit (9- and 12-slot cabinets) installation guide s 164201420 rev b www.Powerware.Com 1 rack-mount installation to install a 9- or 12-slot uninterruptible power system (ups) cabinet into a rack, you must order a cabinet specifically designed for rack-mounting. Nine- and ...
Rack-mount installation eaton powerware ® 9170 + rail kit (9- and 12-slot cabinets) installation guide s 164201420 rev b www.Powerware.Com 2 4. Install six metal clip nuts (nine clip nuts for 12-slot cabinets) onto each side flange along the front of the cabinet (see figure 1). Note do not install m...
Rack-mount installation eaton powerware ® 9170 + rail kit (9- and 12-slot cabinets) installation guide s 164201420 rev b www.Powerware.Com 3 5. Install two rack-mount ears (three for 12-slot cabinets) on each side of the cabinet (see figure 2). Insert the two offset tabs on the rear edge of the ear ...
Rack-mount installation eaton powerware ® 9170 + rail kit (9- and 12-slot cabinets) installation guide s 164201420 rev b www.Powerware.Com 4 6. Select the proper holes in the rail that position the cabinet at the desired location in the rack. 7. Install one equipment rail on each side of the rack us...
Rack-mount installation eaton powerware ® 9170 + rail kit (9- and 12-slot cabinets) installation guide s 164201420 rev b www.Powerware.Com 5 9. Secure the cabinet in the rack using 10-32 × 1/2” torx ® screws or other appropriate customer-specified screws. 10. Follow the instructions in the ups user’...
*164201420b* 164201420 b.
