English tower models 5p 750 5p 1000 5p 1500 5p 850g 5p 1550g copyright © 2012 eaton all rights reserved. Service and support: call your local service representative 620-00082-01-us (en) 1u rack models 5p 550 r 5p 750 r 5p 1000 r 5p 1500 r 5p 850g r 5p 1550g r installation and user manual.
Page 2 620-00082-01-us (en).
Page 3 620-00082-01-us (en) english special symbols the following are examples of symbols used on the ups or accessories to alert you to important information: risk of electric shock - observe the warning associated with the risk of electric shock symbol. Important instructions that must always be f...
Page 4 620-00082-01-us (en) safety of persons • the system has its own power source (the battery). Consequently, the power outlets may be energized even if the systems is disconnected from the ac power source. • dangerousvoltagelevelsarepresentwithinthesystem.Itshouldbeopenedexclusivelybyqualified s...
Page 5 620-00082-01-us (en) english contents 1. Introduction ....................................................................................... 6 1.1 environmental protection ...............................................................................................6 2. Presentation ..........
Page 6 620-00082-01-us (en) 1. Introduction thank you for selecting an eaton product to protect your electrical equipment. The 5p range has been designed with the utmost care. We recommend that you take the time to read this manual to take full advantage of the many features of your ups (uninterrupt...
Page 7 620-00082-01-us (en) english 2. Presentation 2.1 standard installations tower models d h w description weights (lb/kg) dimensions (inch/mm) d x w x h 5p 750 22.7 / 10.3 13.6 x 5.9 x 9.1 / 345 x 150 x 233 5p 1000 24.4 / 11.05 13.6 x 5.9 x 9.1 / 345 x 150 x 233 5p 1500 35.3 / 16.01 17.5 x 5.9 x...
Page 8 620-00082-01-us (en) 2. Presentation 2.2 tower rear panels 5p 750 / 5p 1000 8 5 2 1 4 6a 3 6b 7 9 5p 1500 5 2 1 4 6a 3 6b 7 8 9 5p 850g 3 2 1 4 7 6a 6b 5 8 5p 1550g 2 1 4 5 6a 3 6b 8 7 (1) usb communication port (2) rs232 communication port (3) slot for optional communication card (4) connect...
Page 9 620-00082-01-us (en) english 2. Presentation 2.3 rack rear panels 5p 550 r / 5p 750 r / 5p 1000 r 2 1 4 8 3 6b 5 6a 7 9 5p 1500 r 2 1 4 8 7 3 9 6b 5 6a 5p 850g r 2 1 4 8 7 3 6a 6b 5 5p 1550g r 6a 2 1 4 7 3 6b 5 8 (1) usb communication port (2) rs232 communication port (3) slot for optional co...
Page 10 620-00082-01-us (en) 2. Presentation 2.4 control panel theupshasafive-buttongraphicallcd.Itprovidesusefulinformationabouttheupsitself,loadstatus, events, measurements and settings. Tower models power on indicator (green) on battery indicator (yel- low) alarm indicator (red) normal mode 100% ...
Page 11 620-00082-01-us (en) english 2. Presentation 2.5 lcd description operation status load/equipment status normal mode 100% 10min 100% 720w 800va efficiency: ~98% battery status efficiency and load group information as default, or after 5 minutes of inactivity, the lcd displays the screen saver...
Page 12 620-00082-01-us (en) 2.6 display functions press the enter ( ) button to activate the menu options. Use the two middle buttons ( and ) to scroll through the menu structure. Press the enter ( ) button to select an option. Press the button to cancel or return to the previous menu. Menu map for...
Page 13 620-00082-01-us (en) english 2. Presentation description available settings default settings in/out settings load segments - auto shutdown delay [disable] [0s] [1 s] [2 s]…[65354 s] during a power outage, authorizes ups to turn off power to equipment connected to group 1 and/or group 2 outle...
Page 14 620-00082-01-us (en) 3. Installation 3.1 unpacking and contents check (1) 5p ups (2) quick start and safety instructions (3) user manual and ipss (intelligent power software suite) cd-rom (4) rs232 communication cable (5) usb communication cable (6) 1u rack kit (ears only for 550 r model) (7...
Page 15 620-00082-01-us (en) english 3. Installation 3.2 battery module connection (tower) caution: before starting the ups, please connect the internal battery. Note: a small amount of arcing may occur when connecting the batteries. This is normal and does not damage the ups or present any safety c...
Page 16 620-00082-01-us (en) 3. Installation 3.4 installation of tower models 3.5 installation of rack model for 2 post (option) 4 5 5 3 3 2 2 1 1 use optional 1u 2 post rail kit. Follow steps 1 to 5 for 2 post mounting..
Page 17 620-00082-01-us (en) english 3.7 installation of rack models follow steps 1 to 4 for module mounting on the rails. 1 1 2 2 3 3 4 4 the rails and necessary hardware are supplied by eaton. 3.6 installation of rack models (550 r) follow steps 1 to 3 for rack mounting. 2 3 2 3 1 3. Installation.
Page 18 620-00082-01-us (en) 3.8 installation of rack model for wall mounting 2 2 2 1 1 1 3. Installation.
Page 19 620-00082-01-us (en) english 3. Installation 3.9 communication ports connection of rs232 or usb communication port the rs232 and usb communication ports cannot operate simultaneously. 2 1 5 6 1. Connect the rs232 (5) or usb (6) communication cable to the serial or usb port on the computer eq...
Page 20 620-00082-01-us (en) 4. Operation 4.1 start-up and normal operation to start the ups: 1. Verify that the ups power cord is plugged in. 2. The ups front panel display illuminates and shows eaton logo. 3. Verify that the ups status screen shows . 4. Press the button on the ups front panel for ...
Page 21 620-00082-01-us (en) english 4. Operation low-battery warning • the and indicator illuminates solid. • the audio alarm beeps every three seconds. The remaining battery power is low. Shut down all applications on the connected equipment because automatic ups shutdown is imminent. End of batte...
Page 22 620-00082-01-us (en) 5. Maintenance 5.1 troubleshooting operation status possible cause action batteries disconnected the ups does not recognize the internal batteries if the condition persists, contact your service representative the batteries are disconnected verify that all batteries are ...
Page 23 620-00082-01-us (en) english 5. Maintenance 5.2 battery-module replacement safety recommendations the battery can cause electrocution and high short-circuit currents. The following safety precautions are required before servicing the battery components: • remove watches, rings, bracelets and...
Page 24 620-00082-01-us (en) 5. Maintenance battery tray removal on rack models this operation must be performed when the ups is switched off. A b a - remove the middle panel. B - remove the left-hand side of the front panel by pushing the button and then by sliding the part. C c - disconnect the ba...
Page 25 620-00082-01-us (en) english 6. Appendices 6.1 technical specifications tower 5p 750 5p 1000 5p 1500 rack 5p 550 r 5p 750 r 5p 1000 r 5p 1500 r output power @ 120 v 550 va 420 w 750 va 600 w 1000 va 770 w 1440 va 1100 w output power capacity @ 125 v 550 va 420 w 750 va 600 w 1000 va 770 w 14...
Page 26 620-00082-01-us (en) 6. Appendices 6.1 technical specifications tower 5p 850g 5p 1550g rack 5p 850g r 5p 1550g r output power @ 230 v 850 va 600 w 1550 va 1100 w output power capacity @ 208 v 765 va 540 w 1395 va 990 w output power @ 200 v 765 va 540 w 1395 va 990 w ac input power • rated in...
Page 27 620-00082-01-us (en) english 6. Appendices backup time time during which the load can be supplied by the ups operating on battery power. Battery test internal ups test to check battery status. Cold start the devices connected to the ups can be started even if ac input power is not available....
Page 28 620-00082-01-us (en).
