- DL manuals
- Eaton
- UPS
- 5P 1150i
- Installation And User Manual
Eaton 5P 1150i Installation And User Manual
Summary of 5P 1150i
Page 1
English copyright © 2013 eaton all rights reserved. Service and support: call your local service representative 620-00082-02-i (en) tower models 5p 650i 5p 850i 5p 1150i 5p 1550i 1u rack models 5p 650i r 5p 850i r 5p 1150i r 5p 1550i r installation and user manual.
Page 2
Page 2 620-00082-02-i (en) certification standards special symbols the following are examples of symbols used on the ups or accessories to alert you to important information: risk of electric shock - observe the warning associated with the risk of electric shock symbol. Important instructions that m...
Page 3: Contents
Page 3 620-00082-02-i (en) english contents 1. Introduction ....................................................................................... 4 1.1 environmental protection ...................................................................................................4 2. Presentation .......
Page 4: 1. Introduction
Page 4 620-00082-02-i (en) 1. Introduction thank you for selecting an eaton product to protect your electrical equipment. The 5p range has been designed with the utmost care. We recommend that you take the time to read this manual to take full advantage of the many features of your ups (uninterrupti...
Page 5: 2. Presentation
Page 5 620-00082-02-i (en) english 2. Presentation 2.1 standard installations tower models d h w description weights (kg/ lb ) dimensions (mm/ inch ) d x w x h 5p 650i 7.52 / 16.60 345 x 150 x 233 / 13.6 x 5.9 x 9.2 5p 850i 9.93 / 21.90 345 x 150 x 233 / 13.6 x 5.9 x 9.2 5p 1150i 10.91 / 24.10 345 x...
Page 6: 2. Presentation
Page 6 620-00082-02-i (en) 2. Presentation 2.2 tower rear panels 5p 650i 3 2 1 4 8 7 5 6a 6b 5p 850i 3 2 1 4 7 6a 6b 5 8 5p 1150i 2 1 4 7 5 6a 3 6b 8 5p 1550i 2 1 4 5 6a 3 6b 8 7 (1) usb communication port (2) rs232 communication port (3) slot for optional communication card (4) connector for roo (r...
Page 7: 2. Presentation
Page 7 620-00082-02-i (en) english 2. Presentation 2.3 rack rear panels 5p 650i r / 5p 850i r 2 1 4 8 7 3 6a 6b 5 5p 1150i r 6a 2 1 4 7 3 6b 5 8 5p 1550i r 6a 2 1 4 7 3 6b 5 8 (1) usb communication port (2) rs232 communication port (3) slot for optional communication card (4) connector for roo (remo...
Page 8: 2. Presentation
Page 8 620-00082-02-i (en) 2. Presentation 2.4 control panel the ups has a five-button graphical lcd. It provides useful information about the ups itself, load status, events, measurements and settings. Tower models power on indicator (green) on battery indicator (yellow) alarm indicator (red) norma...
Page 9: 2. Presentation
Page 9 620-00082-02-i (en) english 2. Presentation 2.5 lcd description operation status load/equipment status normal mode 100% 10min 100% 720w 800va efficiency: ~98% battery status efficiency and load group information as default, or after 5 minutes of inactivity, the lcd displays the screen saver. ...
Page 10: 2. Presentation
Page 10 620-00082-02-i (en) 2.6 display functions press the enter ( ) button to activate the menu options. Use the two middle buttons ( and ) to scroll through the menu structure. Press the enter ( ) button to select an option. Press the button to cancel or return to the previous menu. Menu map for ...
Page 11: 2. Presentation
Page 11 620-00082-02-i (en) english 2. Presentation description available settings default settings in/out settings load segments - auto shutdown delay [disable] [0s] [1 s] [2 s]…[65354 s] during a power outage, authorises to keep some equipment running while turning off other equipment. This featur...
Page 12: 3. Installation
Page 12 620-00082-02-i (en) 3. Installation 3.1 unpacking and contents check tower models 1 2 3 4 5 6 rack models 2 3 5 6 8 4 7 1 (1) 5p ups (2) quick start and safety instructions (3) user manual and ipss (intelligent power software suite) cdrom (4) 2 connection cables for the protected equipment (...
Page 13: 3. Installation
Page 13 620-00082-02-i (en) english 3. Installation 3.2 installation of tower models 3.3 wall installation of rack models (650i r / 850i r / 1150i r) 1 1 2 2.
Page 14: 3. Installation
Page 14 620-00082-02-i (en) 3.5 installation of rack models (850i r / 1150i r / 1550i r) follow steps 1 to 4 for module mounting on the rails. 3. Installation 1 1 2 2 3 3 4 4 the rails and necessary hardware are supplied by eaton. 3.4 installation of rack models (650i r only) follow steps 1 to 3 for...
Page 15: 3. Installation
Page 15 620-00082-02-i (en) english 3. Installation 3.6 communication ports connection of rs232 or usb communication port the rs232 and usb communication ports cannot operate simultaneously. 2 1 5 6 1. Connect the rs232 (5) or usb (6) communication cable to the serial or usb port on the computer equ...
Page 16: 4. Operation
Page 16 620-00082-02-i (en) 4. Operation 4.1 start-up and normal operation to start the ups: 1. Verify that the ups power cord is plugged in. 2. The ups front panel display illuminates and shows eaton logo. 3. Verify that the ups status screen shows . 4. Press the button on the ups front panel for a...
Page 17: 4. Operation
Page 17 620-00082-02-i (en) english 4. Operation low-battery warning • the and indicator illuminates solid. • the audio alarm beeps every three seconds. The remaining battery power is low. Shut down all applications on the connected equipment because automatic ups shutdown is imminent. End of batter...
Page 18: 5. Maintenance
Page 18 620-00082-02-i (en) 5. Maintenance 5.1 troubleshooting operation status possible cause action batteries disconnected the ups does not recognise the internal batteries if the condition persists, contact your service representative the batteries are disconnected verify that all batteries are p...
Page 19: 5. Maintenance
Page 19 620-00082-02-i (en) english 5. Maintenance 5.2 battery-module replacement safety recommendations the battery can cause electrocution and high short-circuit currents. The following safety precautions are required before servicing the battery components: • remove watches, rings, bracelets and ...
Page 20: 5. Maintenance
Page 20 620-00082-02-i (en) battery tray removal on rack models a b a - remove the front panel. B - remove the left-hand side of the front panel by pushing the button and then by sliding the part. C c - disconnect the battery block by separating the two connectors (never pull on the wires). D d - re...
Page 21: 6. Appendices
Page 21 620-00082-02-i (en) english 6. Appendices 6.1 technical specifications tower 5p 650i 5p 850i 5p 1150i 5p 1550i rack 5p 650i r 5p 850i r 5p 1150i r 5p 1550i r output power @ 230 v 650 va 420 w 850 va 600 w 1150 va 770 w 1550 va 1100 w output power @ 208 v 585 va 378 w 765 va 540 w 1035 va 693...
Page 22
Page 22 620-00082-02-i (en).