Eaton Power Xpert 9395P-1200 Installation And Operation Manual

Summary of Power Xpert 9395P-1200

  • Page 1

    Eaton ® power xpert ® 9395 high performance (9395p-1200) ups 1200 kva, 1200 kw installation and operation manual for use with three upm (675–900 kva) and four upm (1000–1200 kva) ups models.

  • Page 2

    Important safety instructions save these instructions this manual contains important instructions that you should follow during installation and maintenance of the ups and batteries. Please read all instructions before operating the equipment and save this manual for future reference. Consignes de s...

  • Page 3

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality i table of contents 1 introduction 1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 4

    Table of contents eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality ii 4 ups system installation 4-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 5

    Table of contents eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality iii 7 ups operating instructions 7-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 6

    Table of contents eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality iv 9 ups maintenance 9-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 7

    Table of contents eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality v list of figures figure 1‐1. Eaton 9395p-1200 three upm ups 1-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 8

    Table of contents eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality vi figure 5‐1. Powerware hot sync can bridge card 5-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 9

    Table of contents eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality vii figure 7‐21. Battery log detail 7-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 10

    Table of contents eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality viii this page intentionally left blank..

  • Page 11

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 1-1 chapter 1 introduction the eaton ® power xpert ® 9395p-1200 uninterruptible power supply (ups) is a true online, continuous-duty, transformerless, double-conversi...

  • Page 12

    Introduction eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 1-2 1.1 configurations 1.1.1 three upm ups the eaton 9395p-1200 three upm ups model (675-900 kva) contains two sections (see figure 1‐1): s an isbm or an...

  • Page 13

    Introduction eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 1-3 1.1.2 three upm plus 1 ups the eaton 9395p-1200 plus 1 ups model (1000-1200 kva) contains three sections (see figure 1‐2): s an isbm or an iom sectio...

  • Page 14

    Introduction eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 1-4 1.2 ups standard features the ups has many standard features that provide cost‐effective and consistently reliable power protection. The descriptions...

  • Page 15

    Introduction eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 1-5 1.3 options and accessories contact an eaton sales representative for information about the following options. 1.3.1 integrated battery cabinets batt...

  • Page 16

    Introduction eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 1-6 the tie cabinet must contain module output breakers (mobs) with dual auxiliary contacts for control of the system. Without dual auxiliary mobs, upms ...

  • Page 17

    Introduction eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 1-7 1.3.10 variable module management system and high alert modes note variable module management system and energy saver modes are mutually exclusive. V...

  • Page 18

    Introduction eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 1-8 see chapter 8, “communication,” for additional information on monitoring and communication features. 1.4 battery system although not provided with th...

  • Page 19

    Introduction eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 1-9 in this manual, the term ups refers only to the ups cabinet and its internal elements. The term ups system refers to the entire power protection syst...

  • Page 20

    Introduction eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 1-10 1.8 for more information refer to the eaton ® power xpert ® 9395 integrated battery cabinet (model 1085 and 1085hr) installation manual (p-164000580...

  • Page 21

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 2-1 chapter 2 safety warnings important safety instructions save these instructions this manual contains important instructions that should be followed during install...

  • Page 22

    Safety warnings eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 2-2 s les batteries peuvent présenter un risque de décharge électrique ou de brûlure en raison du courant de court-circuit élevé. Les précautions de b...

  • Page 23

    Safety warnings eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 2-3 s le milieu de fonctionnement doit toujours correspondre aux paramètres établis dans ce manuel. S maintenir les lieux rangés, propres et exempts d...

  • Page 24

    Safety warnings eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 2-4 this page intentionally left blank..

  • Page 25

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 2-1 section i installation.

  • Page 26

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 2-2.

  • Page 27

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-1 chapter 3 ups installation plan and unpacking use the following basic sequence of steps to install the ups: 1. Create an installation plan for the ups system (cha...

  • Page 28

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-2 cautions regarding ups operating environmental conditions: the newer, more energy efficient data center cooling methods (such ...

  • Page 29

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-3 table 3‐1. Ups cabinet maximum weights model section maximum weight kg (lb) shipping installed eaton 9395p-1200/1200 eaton 939...

  • Page 30

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-4 the ups ventilation requirements are shown in table 3‐3 through table 3-6. Table 3‐3. 480v air conditioning or ventilation req...

  • Page 31

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-5 dimensions are in millimeters [inches]. 1880 [74.0] 3576.9 [140.8] figure 3‐1. Ups cabinet dimensions – three upm (front view).

  • Page 32

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-6 dimensions are in millimeters [inches]. 4312.8 [169.8] 1880 [74.0] figure 3‐2. Ups cabinet dimensions – four upm (front view) ...

  • Page 33

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-7 dimensions are in millimeters [inches]. 1880 [74.0] 1705 [67.1] for 4-wire systems only figure 3‐4. Isbm section dimensions (f...

  • Page 34

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-8 front dimensions are in millimeters [inches]. Figure 3‐6. Upm section dimensions (top view) front dimensions are in millimeter...

  • Page 35

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-9 front dimensions are in millimeters [inches]. Figure 3‐8. Isbm section dimensions (bottom view) 1705 [67.1] isbm upms 2444 [96...

  • Page 36

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-10 isbm upms 1705 [67.1] 2444 [96.2] 1007 [39.6] 1871.9 [73.7] 290 [11.4] 735.9 [29.0] fi-upm 1029 [40.5] front dimensions are i...

  • Page 37

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-11 dimensions are in millimeters [inches]. 115.8 [4.56] 114.3 [4.50] 0.87 [0.22] 88.9 [3.50] front view 1.57 [0.40] needed to re...

  • Page 38

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-12 s the isbm and upm sections are shipped with debris shields covering the ventilation grills on top of the sections. Do not re...

  • Page 39

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-13 table 3‐5. 480v input/output ratings and external wiring requirements for the four upm – common battery basic unit rating uni...

  • Page 40

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-14 table 3‐6. 480v input/output ratings and external wiring requirements for the four upm – separate battery basic unit rating u...

  • Page 41

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-15 table 3‐7. 480v input/output ratings and external wiring requirements for the three upm – common battery basic unit rating un...

  • Page 42

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-16 table 3‐8. 480v input/output ratings and external wiring requirements for the three upm – separate battery basic unit rating ...

  • Page 43

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-17 table 3‐9. 415v input/output ratings and external wiring requirements for the three/four upm models – common battery basic un...

  • Page 44

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-18 table 3‐10. 415v input/output ratings and external wiring requirements for the three/four upm models – separate battery basic...

  • Page 45

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-19 table 3‐11. 400v input/output ratings and external wiring requirements for the three/four upm models – common battery basic u...

  • Page 46

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-20 table 3‐12. 400v input/output ratings and external wiring requirements for the three/four upm models – separate battery basic...

  • Page 47

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-21 table 3‐13. 380v input/output ratings and external wiring requirements for the three/four upm models – common battery basic u...

  • Page 48

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-22 table 3‐14. 380v input/output ratings and external wiring requirements for the three/four upm models – separate battery basic...

  • Page 49

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-23 table 3‐15. Ups intercabinet power cable terminations for the three/four upm models terminal function terminal function bus l...

  • Page 50

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-24 terminals e1 through e11 are 2‐hole busbar mountings for standard nema 2‐hole barrel lugs. The power wiring connections for t...

  • Page 51

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-25 table 3‐18. Supplied external wiring terminal hardware kit part size quantity terminals used on eaton part number bolt, grade...

  • Page 52

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-26 table 3‐20. 480v power cable conduit requirements ups model voltage terminal number of wires in conduit minimum conduit trade...

  • Page 53

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-27 table 3‐21. 415v /400v/380v power cable conduit requirements ups model voltage terminal number of wires in conduit minimum co...

  • Page 54

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-28 table 3‐21. 415v /400v/380v power cable conduit requirements (continued) number of conduits minimum conduit trade size number...

  • Page 55

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-29 table 3‐22. Recommended input circuit breaker ratings (100% load rating) ups model input rating 480v, 415v, 400v, 380v eaton ...

  • Page 56

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-30 external dc input overcurrent protection and disconnect switch is to be provided by the customer. Table 3‐24 and table 3‐25 l...

  • Page 57

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-31 s use class 1 wiring methods (as defined by the nec) for interface wiring from 30v to 600v. The wire should be rated at 600v,...

  • Page 58

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-32 3.2.5 distributed bypass power wiring preparation note for full-rated operation of a distributed bypass system when in bypass...

  • Page 59

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-33 c a u t i o n to prevent damage to the wiring channel and wiring in the upm section base when lifting or moving the cabinet: ...

  • Page 60

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-34 2. Use a forklift or pallet jack to move the packaged cabinets to the installation site, or as close as possible, before unpa...

  • Page 61

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-35 figure 3‐13. Ups cabinet as shipped on pallet (isbm section).

  • Page 62

    Ups installation plan and unpacking eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 3-36 figure 3‐14. Ups cabinet as shipped on pallet (upm section).

  • Page 63

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-1 chapter 4 ups system installation 4.1 preliminary installation information w a r n i n g installation should be performed only by qualified personnel. A v e r t i...

  • Page 64

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-2 to prevent damage to the wiring channel and wiring in the upm section base when lifting or moving the cabinet: s lift and move the upm sec...

  • Page 65

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-3 shipping bracket bolts shipping bracket bolts pallet left side shipping bracket front door figure 4‐1. Removing the isbm section left side...

  • Page 66

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-4 shipping bracket bolts shipping bracket bolts pallet right side shipping bracket isbm removable front panels for 4-wire systems only figur...

  • Page 67

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-5 shipping bracket bolts shipping bracket bolts pallet left side shipping bracket upm removable front panels wireway panel figure 4‐3. Remov...

  • Page 68

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-6 shipping bracket bolts shipping bracket bolts pallet right side shipping bracket figure 4‐4. Removing the upm section right side shipping ...

  • Page 69

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-7 left top panel wireway panel left middle panel corner channel upm section interior left side panel figure 4‐5. Section joining 5. Remove t...

  • Page 70

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-8 8. Reinstall the corner channel (see figure 4‐5) and secure using the retained hardware. 9. Reinstall the left middle panel (see figure 4‐...

  • Page 71

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-9 front view base bracket upm section base isbm section base bracket from kit screw from kit screw from kit top view rear bracket upm sectio...

  • Page 72

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-10 note two cable lugs will be connected to each terminal stud. When connecting the cable lugs, install the first lug on the stud with the r...

  • Page 73

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-11 note four intercabinet interface wiring harnesses are supplied coiled inside the protective cage on the right side panel of the isbm sect...

  • Page 74

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-12 note on a ups configured with a continuous static switch (css), cb4 is not installed. Note on a ups configured as an input output module ...

  • Page 75

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-13 note two cable lugs will be connected to each terminal stud. When connecting the cable lugs, install the first lug on the stud with the r...

  • Page 76

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-14 dc input to upms + cable 1g3 black upm 1 (1e5a) cable 1g3 black dc input to upms cable 1g3 red upm 1 (1e4a) cable 1g3 red – cable 2g3 bla...

  • Page 77

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-15 wiring access location of j50, j51, j61, and j70 coiled harnesses location of rj-45 coiled can cable upm wireway location of p61 harness ...

  • Page 78

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-16 isbm section right side inside view pl1 interface board front figure 4‐13. Pl1 interface board location pl1 interface board j39 inverter ...

  • Page 79

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-17 4.5 field installed upm installation note fi-upm installation is not applicable to a three upm model. If installing a four upm model, ins...

  • Page 80

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-18 4.8 installing ups external and battery power wiring note the isbm and upm sections are shipped with debris shields covering the ventilat...

  • Page 81

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-19 ventilation grill debris shield (remove shield before operating system.) isbm section front ventilation grill debris shields (remove shie...

  • Page 82

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-20 top entry conduit landing for ac input and output, and dc input (remove panel to drill or punch conduit holes.) top view interface entry ...

  • Page 83

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-21 8. If wiring a distributed bypass system, proceed to step 9; otherwise, proceed to step 11. 9. Using hardware from the external wiring te...

  • Page 84

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-22 phase a (e6) phase c (e8) phase b (e7) ac input to ups rectifier phase a (e1) phase c (e3) phase b (e2) ac input to ups bypass front sect...

  • Page 85

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-23 4.8.2 battery power wiring c a u t i o n when sizing the battery system, do not exceed the internal battery charger capabilities. See cha...

  • Page 86

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-24 dc input from battery + (e4) – (e5) dc input from battery front section b–b figure 4‐19. Isbm section power terminal detail bb – common b...

  • Page 87

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-25 dc input from battery + (e4) – (e5) dc input from battery dc input from battery + (e4) (upm 1) (upm 3) – (e5) dc input from battery (upm ...

  • Page 88

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-26 use the procedures in the following paragraphs to connect the tb1, tb1 battery, tb2, and tb3 interface connections. 4.9.1 tb1, tb2, and t...

  • Page 89

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-27 12. Close the door and secure the latch. X-slot communication bays tb3 tb1 and tb2 (see figure 4‐22 for detail.) (see figure 4‐24 for ter...

  • Page 90

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-28 table 4‐1. Tb1, tb2, and tb3 interface connections terminal tb1 name description 1 repo nc input: normally‐closed dry contact used to act...

  • Page 91

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-29 x-slot communication bays tb1 tb2 see figure 4‐24 for terminal assignments. Figure 4‐22. Interface terminal detail tb2 note alarm relay c...

  • Page 92

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-30 ups building alarm 3 building alarm 3 return building alarm 4 building alarm 5 building alarm 4 return building alarm 5 return note all b...

  • Page 93

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-31 4.9.2 tb1 battery interface connections to install wiring to connections: 1. Verify the ups system is turned off and all power sources ar...

  • Page 94

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-32 battery disconnect tb1 battery aux battery aux common 48 vdc battery shunt trip + 48 vdc battery shunt trip – ups st 5 6 7 8 note battery...

  • Page 95

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-33 4.9.3 x-slot connections note lan drops for use with x-slot cards must be provided by the customer. Note when installing external wiring ...

  • Page 96

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-34 4.10 installing a repo switch a latching-type remote emergency power-off (repo) switch can be used in an emergency to shut down the ups a...

  • Page 97

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-35 6. Remove the left interface entry conduit landing plate to drill or punch holes (see figure 4‐16). 7. Reinstall the interface entry plat...

  • Page 98

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-36 14. Reinstall the front door removed in step 4 and secure with the retained hardware. 15. Close the door and secure the latch. Figure 4‐3...

  • Page 99

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-37 4.11 installing options, accessories, and distributed bypass control wiring to install options, accessories, and distributed bypass contr...

  • Page 100

    Ups system installation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 4-38 installation checklist - all packing materials and restraints have been removed from each cabinet. - each cabinet in the ups system is pl...

  • Page 101

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-1 chapter 5 installing options and accessories read and understand the following notes while planning and performing the wiring installation: s conduit must be inst...

  • Page 102

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-2 5.1 installing an optional powerware hot sync can bridge card as an option, a powerware hot sync controller area network (can) ...

  • Page 103

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-3 connections for parallel system control connections for rmp ii, rim ii, or scm ii alarm j3 connections for bypass status figure...

  • Page 104

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-4 5.2 installing distributed bypass control wiring note when installing external wiring to the powerware hot sync can bridge card...

  • Page 105

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-5 ups 1 ups 2 ups 3 ups 4 can (if installed) (if installed) pull chain note this drawing is for distributed bypass wiring purpose...

  • Page 106

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-6 1 2 3 4 5 7 8 6 9 10 ups 1 twisted pair twisted pair twisted pair twisted pair twisted pair twisted pair 1 2 3 4 5 7 8 6 9 10 1...

  • Page 107

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-7 note nc and no designations on mob aux contacts are defined with breaker in off (open) position. Note if mob contacts have pigt...

  • Page 108

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-8 table 5‐4. Pull-chain wiring terminations with mobs from to function ups 1 can bridge card j3–1 (alarm) mob 1 aux 1 nc mob open...

  • Page 109

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-9 5.3 installing an optional remote monitor panel ii to install rmp ii wiring: 1. Verify the ups system is turned off and all pow...

  • Page 110

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-10 terminal tb1 signal connections from the ups ground terminal terminal tb3 120 vac power figure 5‐7. Remote monitor panel ii an...

  • Page 111

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-11 note setup of the powerware hot sync can bridge card must be performed by an authorized eaton customer service engineer. Conta...

  • Page 112

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-12 10. Restart the ups. See chapter 7, “ups operating instructions,” for startup instructions. Note setup of the powerware hot sy...

  • Page 113

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-13 5.5 installing an optional supervisory contact module ii to install scm ii wiring: 1. Verify the ups system is turned off and ...

  • Page 114

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-14 note setup of the powerware hot sync can bridge card must be performed by an authorized eaton customer service engineer. Conta...

  • Page 115

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-15 5.6 accessory mounting dimensions figure 5‐12 through figure 5‐14 show the dimensions of the rmp ii, the rim ii, and the scm i...

  • Page 116

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-16 knockouts provided on five surfaces surface mount using #10 pan head screws for hanging. (mount with vent holes facing up.) fl...

  • Page 117

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-17 knockouts provided on five surfaces surface mount using #10 pan head screws for hanging. (mount with vent holes facing up.) fl...

  • Page 118

    Installing options and accessories eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-18 this page intentionally left blank..

  • Page 119

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-19 section ii operation.

  • Page 120

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 5-20

  • Page 121

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-1 chapter 6 understanding ups operation 6.1 ups system overview the eaton 9395p-1200 ups is a continuous-duty, solid‐state, transformerless (at 480 vac), three-phas...

  • Page 122

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-2 on a ups configured as an input output module (iom), bypass circuitry is not installed. This configuration is primarily used in multip...

  • Page 123

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-3 the battery converter derives its input from the regulated dc output of the rectifier and provides either a boosted or bucked regulate...

  • Page 124

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-4 6.2.3 energy saver system mode note vmms and ess modes are mutually exclusive. If ess mode is enabled, vmms mode is disabled. When the...

  • Page 125

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-5 vmms's upm automatic scheduling rotates the idle upms every month with the abm cycle. This allows the upms to have equal load-share ti...

  • Page 126

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-6 static switch k5 rectifier inverter k1 k3 battery converter battery battery breaker main power flow trickle current energized de-energ...

  • Page 127

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-7 if the input power fails to return or is not within the acceptance windows required for normal operation, the battery continues discha...

  • Page 128

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-8 6.3 single ups unit system oneline configurations the system oneline drawings in this section show the simplified internal structure o...

  • Page 129

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-9 input breaker (cb1) (optional) x-slot interface e1, e2, e3 e6, e7, e8, e12 48v battery shunt trip note callout letters a , b , c , and...

  • Page 130

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-10 input breaker (cb1) (optional) e1, e2, e3 e6, e7, e8, e12 note callout letters a , b , c , and d map to table 3-5 on page 3-13. Ups c...

  • Page 131

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-11 input breaker (cb1) (optional) x-slot interface e1, e2, e3 e6, e7, e8, e12 48v battery shunt trip note callout letters a , b , c , an...

  • Page 132

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-12 input breaker (cb1) (optional) x-slot interface e1, e2, e3 e6, e7, e8, e12 48v battery shunt trip note callout letters a , b , c , an...

  • Page 133

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-13 input breaker (cb1) (optional) x-slot interface e1, e2, e3 48v battery shunt trip note callout letters a , c , and d map to table 3‐5...

  • Page 134

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-14 input breaker (cb1) (optional) e1, e2, e3 note callout letters a , c , and d map to table 3-5 on page 3-13. Ups cabinet e9, e10, e11,...

  • Page 135

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-15 maintenance bypass panel output from ups mis to ups rectifier input rib: rectifier input breaker bib: bypass input breaker mis: maint...

  • Page 136

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-16 6.4 multiple ups distributed bypass system distributed bypass parallel operation extends the normal operation of an eaton 9395p-1200 ...

  • Page 137

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-17 s in bypass mode, the critical load is directly supported by utility power through the bypass circuit in each ups. S in battery mode,...

  • Page 138

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-18 main power flow ups 1 ups 2 ups 3 ups 4 output to critical load battery ups input tie cabinet ups 1 output bypass input ups 2 output ...

  • Page 139

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-19 main power flow ups 1 ups 2 ups 3 ups 4 output to critical load battery ups input tie cabinet ups 1 output bypass input ups 2 output ...

  • Page 140

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-20 6.4.4 battery mode – distributed bypass the upss transfer to battery mode automatically if a utility power outage occurs, or if the u...

  • Page 141

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-21 if at any time during the battery discharge the input power becomes available again, the rectifier begins to supply dc current to the...

  • Page 142

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-22 battery breaker battery converter inverter k3 fuse rectifier k1 k2 fuse fuse fuse k5 static switch fuse e1 e2 e3 cb1 (optional) ups 1...

  • Page 143

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-23 battery breaker battery converter inverter k3 fuse rectifier k1 k2 fuse fuse fuse e6 e7 e8 e12 k5 static switch fuse e1 e2 e3 cb1 (op...

  • Page 144

    Understanding ups operation eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 6-24 battery breaker battery converter inverter k3 fuse rectifier k1 k2 fuse fuse fuse e6 e7 e8 e12 k5 static switch fuse e1 e2 e3 cb1 (op...

  • Page 145

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-1 chapter 7 ups operating instructions this section describes how to operate the ups using the color touchscreen control. Note before starting the ups, ensure all i...

  • Page 146

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-2 7.1.2 circuit breakers optional circuit breaker (cb1) is used to control the ac input to the ups rectifier. 7.2 color touchscreen contr...

  • Page 147

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-3 7.3 using the color touchscreen control panel the following sections describe the ups control panel and how to monitor and control ups ...

  • Page 148

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-4 7.3.1 status indicators the symbols on the bottom of the control panel are status indicators. These colored light emitting diode (led) ...

  • Page 149

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-5 a the ups status area automatically displays the eaton model number, current time and date, active alarms, active notices, and load per...

  • Page 150

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-6 7.3.3 using the main menu buttons the ups menu bar shown in figure 7‐6 allows you to display data in the information area to help you m...

  • Page 151

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-7 7.3.4 power maps screen (online mode) figure 7‐7 shows the main menu and power maps screen. The power maps screen displays immediately ...

  • Page 152

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-8 touching the average efficiency button displays the system efficiency screen shown in figure 7‐9. Figure 7‐9. Average efficiency screen...

  • Page 153

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-9 7.3.5 power maps screen (bypass mode) figure 7‐11 shows the bypass screen. The bypass screen displays only when the system is in bypass...

  • Page 154

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-10 7.3.7 meters summary screen figure 7‐13 shows the meters summary screen. This screen allows selection of the various metering readout ...

  • Page 155

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-11 7.3.8 input meters screen figure 7‐14 shows the input meters screen. This screen displays the individual phase and total power values ...

  • Page 156

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-12 the output meters screen shown in figure 7‐16 displays values pertaining to the system output. Figure 7‐16. Output meters screen.

  • Page 157

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-13 7.3.9 input meters detail screen figure 7‐17 shows the input meters detail screen. This screen displays the individual values of the s...

  • Page 158

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-14 7.3.10 battery meters screens figure 7‐19 shows the battery meters basic screen. Figure 7‐20 shows the battery log access screen. Figu...

  • Page 159

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-15 figure 7‐21 shows the battery log detail screen. Figure 7‐22 shows the battery log summary screen. Figure 7‐21. Battery log detail fig...

  • Page 160

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-16 7.3.11 system events main screen when the ups system is running in online mode, it continually monitors itself and the incoming utilit...

  • Page 161

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-17 the user log window (1) allows the operator to enter any number up to the number shown to the right of the box. Each window shows five...

  • Page 162

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-18 7.3.13 system status screen and controls press the system controls pushbutton on the main menu bar to display the system status screen...

  • Page 163

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-19 figure 7‐28 shows the module control detail screen. By selecting any of the modules shown on the previous screen (figure 7‐27), the us...

  • Page 164

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-20 indicates an event (system on bypass) figure 7‐30. Bypass mode metering method option screen 7.3.14 settings screen the screen shown i...

  • Page 165

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-21 7.3.15 configuration options screen the screen shown in figure 7‐32 allows the operator to affect changes to various system values. Fi...

  • Page 166

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-22 figure 7‐34. Disable ess screen this screen shown in figure 7‐34 asks the operator to verify disabling the ess mode running at that ti...

  • Page 167

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-23 7.3.17 statistics basic screen the screen shown in figure 7‐36 allows the operator to query the system for various operational statist...

  • Page 168

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-24 7.3.18 ess comparison screen the screen shown figure 7‐38 allows the operator to visually obtain eaa mode efficiency values. Figure 7‐...

  • Page 169

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-25 7.3.20 system overview screen the screen shown figure 7‐40 displays values for all ups and upm parameters. Figure 7‐40. System overvie...

  • Page 170

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-26 7.4 ups operation using the color touchscreen control panel note the energy saver system mode commands are displayed only if installed...

  • Page 171

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-27 14. The ups start up screen appears the rectifier and inverter turn on. The inverter continues to ramp up to full voltage. When the in...

  • Page 172

    Ups operating instructions eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 7-28 note the following instructions are for the eaton-supplied repo switch. If a customer-supplied repo switch is used, it may not activat...

  • Page 173

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 8-1 chapter 8 communication this chapter describes the communication features of the eaton 9395p-1200 ups and provides information about connecting hardware. For term...

  • Page 174

    Communication eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 8-2 8.2 predictpulse the eaton 9395p-1200 ups supports eaton's predictpulse remote monitoring and management service . Predictpulse is a subscription mo...

  • Page 175

    Communication eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 8-3 s a foundation based on ca technologies’ leading data center infrastructure management (dcim) software application. This enables powerful reporting,...

  • Page 176

    Communication eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 8-4 8.4 building alarm monitoring this standard feature lets you connect the ups to your building alarms, such as smoke detectors or overtemperature ala...

  • Page 177

    Communication eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 8-5 8.6 remote monitor panel ii as an option, an rmp ii can be installed to monitor the operation of the ups system from virtually any location within t...

  • Page 178

    Communication eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 8-6 the rmp ii contains a local horn and the backlit status indicators listed in table 8‐1. Table 8‐1. Rmp ii status indicators system normal the ups is...

  • Page 179

    Communication eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 8-7 8.7 relay interface module ii an optional rim ii uses relay contact closures to indicate the operating status and alarm condition of the ups system....

  • Page 180

    Communication eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 8-8 8.8 supervisory contact module ii an optional scm ii establishes an interface between the ups system and the customer's monitor. This interface allo...

  • Page 181

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 9-1 chapter 9 ups maintenance the components inside the ups cabinet are secured to a sturdy metal frame. All repairable parts and assemblies are located for easy remo...

  • Page 182

    Ups maintenance eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 9-2 s when replacing batteries, use the same number of sealed, lead‐acid batteries. S proper disposal of batteries is required. Refer to your local co...

  • Page 183

    Ups maintenance eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 9-3 mise en garde! Vérifier que les filtres sont bien secs avant de les réinstaller. A. Remove one top screw and two bottom screws securing each upm s...

  • Page 184

    Ups maintenance eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 9-4 bottom left isbm air filters bottom right isbm air filters middle right isbm air filter for 4-wire systems only figure 9‐1. Isbm section air filte...

  • Page 185

    Ups maintenance eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 9-5 upm air filters figure 9‐2. Upm section air filter locations 3. If the ups is a four upm model, check the field installed upm (fi-upm) air filter ...

  • Page 186

    Ups maintenance eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 9-6 4. Record maintenance results and any corrective actions in a suitable log. Fi-upm air filter figure 9‐3. Fi-upm air filter location 9.2.3 periodi...

  • Page 187

    Ups maintenance eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 9-7 9.3 installing batteries note there is no manual dc disconnect device within the ups. Install batteries in accordance with the battery and battery...

  • Page 188

    Ups maintenance eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 9-8 9.5 maintenance training a basic training course, available from eaton, gives you a competent working knowledge of the ups system operation and te...

  • Page 189

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 10-1 chapter 10 product specifications 10.1 model numbers the ups is housed in two or three free‐standing cabinets with safety shields behind the door and front panel...

  • Page 190

    Product specifications eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 10-2 battery voltage 480 vdc battery charging capacity configurable per upm at nominal line voltage: up to 120a with less than 85% load up to 8...

  • Page 191

    Product specifications eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 10-3 10.2.3 ups environmental operating temperature all ratings except 1200 kw, 900 kw : 0 to 40°c (32 to 104°f) at elevation up to 1000m witho...

  • Page 192

    Product specifications eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality 10-4 this page intentionally left blank..

  • Page 193

    Eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality w-1 warranty limited factory warranty for three-phase eaton ups products warrantor: the warrantor for the limited warranties set forth herein is eaton (“eaton”). Limi...

  • Page 194

    Warranty eaton power xpert 9395p-1200 ups (1200 kva, 1200 kw) installation and operation manual s p-164000500 rev 4 www.Eaton.Com/powerquality w-2 this page intentionally left blank..

  • Page 196

    *p-1640005004* p-164000500 4.