Quick start instructions connectups-e models package contents s powerware connectups t web/snmp adapter s male db-9 to rj-45 serial cable with detachable dc power cable s female db-9 to rj-45 serial cable (labeled “pc”) s external power supply with detachable power cord s software suite cd with user...
. . . . . . . . . . . . . . . Checklist 1. Verify that all of the following items are available: j connectups web/snmp adapter package contents (see front cover) j phillips screwdriver j microsoft r windows r operating system (for other operating systems, see the help file on the software suite cd) ...
Figure 1. Verify dip switches figure 2. Open or remove the ups front cover 12 20–80 kva 7.5–15 kva 1 0 eaton powerware ® connectupst web/snmp adapter (e model) quick start instructions 164950186 rev a 3 section 1 install the adapter—powerware 9305 ups the hot-swappable connectups-e can be installed ...
Eaton powerware ® connectupst web/snmp adapter (e model) quick start instructions 164950186 rev a 4 4. If the x100 port is not available, use the supplied serial cable (labeled “pc”) to connect the ups port on the connectups-e to the male, 9-pin, rs-232 port (labeled x101) on the ups (see figure 4)....
12 1 0 figure 5. Verify dip switches figure 6. Remove the ups front cover eaton powerware ® connectupst web/snmp adapter (e model) quick start instructions 164950186 rev a 5 section 2 install the adapter—powerware 9150 ups the hot-swappable connectups-e can be installed without turning off the ups o...
Eaton powerware ® connectupst web/snmp adapter (e model) quick start instructions 164950186 rev a 6 note the supplied external power supply must be used with the powerware 9150 ups. Do not plug the dc power cable into the serial cable. 5. Insert the external power supply cord into the power inlet on...
Figure 9. Select connection figure 10. Configure port settings eaton powerware ® connectupst web/snmp adapter (e model) quick start instructions 164950186 rev a 7 section 3 connect the adapter note if you used the serial cable labeled “pc” in the connectups-e installation, temporarily remove the cab...
Figure 11. Enter configuration password eaton powerware ® connectupst web/snmp adapter (e model) quick start instructions 164950186 rev a 8 7. After a few seconds, press enter. The password prompt appears (see figure 11). If the password prompt does not appear, press enter again. If it still does no...
Figure 12. Configure adapter settings figure 13. Set connectups adapter ip address figure 14. Save and exit figure 15. Connectups adapter summary page eaton powerware ® connectupst web/snmp adapter (e model) quick start instructions 164950186 rev a 9 section 4 configure the adapter to configure the ...
Figure 16. Install netwatch software figure 17. Launch netwatch software figure 18. Enter connectups adapter ip address figure 19. Select ups load segment eaton powerware ® connectupst web/snmp adapter (e model) quick start instructions 164950186 rev a 10 section 5 install shutdown software note the...
Figure 20. Select shutdown option figure 21. Select event and logging options figure 22. Verify configuration settings figure 23. Clear communication message eaton powerware ® connectupst web/snmp adapter (e model) quick start instructions 164950186 rev a 11 10. Select your preferred method of shutt...
Help desk numbers: united states 1.800.356.5737 or 919.870.3149 canada 1.800.461.9166 ext. 260 www.Powerware.Com all other countries call your local sales representative © 2006 eaton corporation all rights reserved 164950186 rev a.
