1. DL manuals
  2. Eaton
  3. UPS
  4. Powerware 9910 EBM
  5. Installation Manual

Eaton Powerware 9910 EBM Installation Manual - Class A Emc Statements

Manual is about: 6000 VA Models for IBM Applications

Summary of Powerware 9910 EBM

  • Page 1

    Powerware series eaton 9910 ups and ebm installation guide for ibm applications 6000 va models ®.

  • Page 3: Eaton  9910 Ups and Ebm

    Powerware series eaton 9910 ups and ebm installation guide for ibm applications 6000 va models ®.

  • Page 4

    Requesting a declaration of conformity units that are labeled with a ce mark comply with the following harmonized standards and eu directives: s harmonized standards: iec 62040-1-1 and iec 62040-2; iec 60950 third edition s eu directives: 73/23/eec, council directive on equipment designed for use wi...

  • Page 5: Class A Emc Statements

    Class a emc statements fcc part 15 note this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a c...

  • Page 6: Special Symbols

    Special symbols the following are examples of symbols used on the ups or accessories to alert you to important information: risk of electric shock - observe the warning associated with the risk of electric shock symbol. Caution: refer to operator's manual - refer to your operator's manual for additi...

  • Page 7

    Eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 i table of contents 1 preparation 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parts list 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 8

    Table of contents eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 ii 7 service and support 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Updating the ups firmware 39 . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 9: Parts List

    Eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 1 chapter 1 preparation use the information in this chapter to prepare to install or connect the ups, extended battery module (ebm), and optional accessories. Note the illustrations in this document might differ slightly ...

  • Page 10

    Preparation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 2 table 3. Rail kit, all models (730-b0104-00p) ibm mtm ibm fc ibm pn eaton pn description quantity per rail kit — — — 373-52322-00 slide rail, front right 1 each (assembled into one left rail assembly and one...

  • Page 11

    Preparation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 3 table 6. 9910-6652 ebm base configuration (74y8486) quantity ibm mtm ibm fc ibm pn eaton pn description 1 — 9910-6652 74y8486 9000-1338-00p 9910-6652 ebm 6000 va 1 — — — 730-b0104-00p rail kit table 7. Ebm a...

  • Page 12: Inspecting The Equipment

    Preparation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 4 inspecting the equipment if any equipment has been damaged during shipment, keep the shipping cartons and packing materials for the carrier or place of purchase, and file a claim for shipping damage. If you ...

  • Page 13: Save These Instructions

    Eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 5 chapter 2 safety warnings important safety instructions save these instructions this manual contains important instructions that you should follow during installation and maintenance of the ups and batteries. Please rea...

  • Page 14

    Safety warnings eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 6 c a u t i o n s servicing of batteries should be performed or supervised by personnel knowledgeable about batteries and the required precautions. Keep unauthorized personnel away from batteries. S batter...

  • Page 15: Consignes De Sécurité

    Safety warnings eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 7 consignes de sécurité consignes de sÉcuritÉ importantes conserver ces instructions ce manuel comporte des instructions importantes que vous êtes invité à suivre lors de toute procédure d'installation et ...

  • Page 16

    Safety warnings eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 8 a t t e n t i o n ! S la réparation des batteries doit être réalisée ou supervisée par un personnel connaissant les batteries et les précautions requises. Maintenez le personnel non autorisé éloigné des ...

  • Page 17: Sicherheitswarnungen

    Safety warnings eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 9 sicherheitswarnungen wichtige sicherheitsanweisungen aufbewaren dieses handbuch enthält wichtige anweisungen, die sie während der installation und wartung des usv (unterbrechungsfreies stromversorgungssy...

  • Page 18

    Safety warnings eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 10 v o r s i c h t ! S die wartung der batterien sollte unter befolgung der erforderlichen sicherheitsvorkehrungen durch fachkundiges personal erfolgen oder beaufsichtigt werden. Nicht ausreichend geschult...

  • Page 19: Regulamentos De Segurança

    Safety warnings eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 11 regulamentos de segurança instruÇÕes de seguranÇa importantes guarde estas instruÇÕes este manual contém instruções importantes que devem ser seguidas durante a instalação e manutenção do no-break e das...

  • Page 20

    Safety warnings eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 12 p e r i g o s o serviço na bateria deve ser feito ou supervisionado por funcionários com conhecimento de baterias e das precauções necessárias. Mantenha funcionários não autorizados longe das baterias. ...

  • Page 21

    Safety warnings eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 13 Ïðåäóïðåæäåíèÿ ïî ìåðàì áåçîïàñíîñòè ÀÆÍÛÅ ÓÊÀÇÀÍÈß ÏÎ ÌÅÐÀÌ ÁÅÇÎÏÀÑÍÎÑÒÈ ÑÎÕÐÀÍÈÒÅ ÝÒÈ ÓÊÀÇÀÍÈß äàííîì ðóêîâîäñòâå ñîäåðæàòñÿ âàæíûå èíñòðóêöèè ïî óñòàíîâêå è îáñëóæèâàíèþ èñòî÷íèêà áåñïåðåáîéíîãî ïèòà...

  • Page 22

    Safety warnings eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 14 Î Ñ Ò Î Ð Î Æ Í Î s Обслуживание батарей должно выполняться или контролироваться персоналом, знакомым с батареями и мерами предосторожности. Лица, не обладающие соответствующими полномочиями, не должны ...

  • Page 23: Advertencias De Seguridad

    Safety warnings eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 15 advertencias de seguridad instrucciones de seguridad importantes guarde estas instrucciones este manual contiene instrucciones importantes que debe seguir durante la instalación y el mantenimiento del s...

  • Page 24

    Safety warnings eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 16 p r e c a u c i Ó n s el servicio a las baterías se debe llevar a cabo o estar supervisado por personal con conocimientos sobre las baterías y las precauciones requeridas. No permita que personal no aut...

  • Page 25: Installation Precautions

    Eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 17 chapter 3 installation the 9910 ups and extended battery module (ebm) can be purchased separately or factory-installed in an ibm rack. Note review “preparation” on page 1 and the following “installation precautions,” a...

  • Page 26: Ups Rear Panels

    Installation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 18 s plan the device installation starting from the bottom of the rack cabinet. Install the heaviest device in the bottom of the rack cabinet. S do not extend more than one device out of the rack cabinet at t...

  • Page 27: Replacing An Ebm

    Installation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 19 connector l6−30p communication bay usb connector rs−232 connector repo ground screw p fan six iec 320−c13 receptacles (load segment 2) output circuit breaker ebm connector output circuit breakers four iec ...

  • Page 28

    Installation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 20 to replace an ebm: 1. Unplug the ebm power cord from the ups. 2. Replace the ebm. See the recycling information in the user's guide for proper disposal. 3. Align the ebm power cord with the ebm connector o...

  • Page 29

    Installation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 21 rack installation and ups internal battery connection note if the ups is pre-installed in a rack, you must first remove the protective shipping bracket installed on the front of the ups. See “removing the ...

  • Page 30

    Installation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 22 6. Loosen the rail adjustment screw and adjust the left and right rail length to the depth of the rack cabinet, as shown in figure 6. Figure 6. Adjusting the rail length 7. Select a location in the the rac...

  • Page 31

    Installation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 23 9. Secure each rail to the rear of the rack with four m5 16 mm screws, as shown in figure 8. Figure 8. Attaching the rears of the rails 10. Tighten the rail adjustment screw in the middle of each rail. 11....

  • Page 32

    Installation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 24 12. Loosen the thumbscrew [1] on the battery retaining bracket, slide the bracket to the left [2], rotate the bracket out [3], then slide the bracket to the right and remove it [4]. Figure 9. Removing the ...

  • Page 33

    Installation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 25 14. Align the rear hold down brackets on the sides of the ups or ebm with the inner rails. Carefully slide the ups or ebm into the rack cabinet. See figure 11. Ok 100% 6 min 150 0va 208v/60h z ups on rear ...

  • Page 34

    Installation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 26 19. Slide the battery retaining bracket [1] to the left into the slot, as shown in figure 12. 20. Rotate the bracket toward the ups [2]. Verify that the internal battery connectors are out of the way. 21. ...

  • Page 35

    Installation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 27 23. Locate the upper and lower front covers that come with the ups. The upper front cover has an opening for the lcd. 24. To install the upper front cover, press the two side latches toward each other, ali...

  • Page 36: Connecting The Ebm

    Installation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 28 connecting the ebm note you can connect only one ebm to the ups. To connect an ebm to the ups: 1. Verify that the ebm is installed in the rack cabinet directly below the ups. 2. Align the ebm power cord wi...

  • Page 37

    Installation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 29 remote emergency power-off (repo) an emergency power-off (disconnect) switch may be required by local codes. Note for europe, the emergency switch requirements are detailed in harmonized document hd-384-48...

  • Page 38

    Installation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 30 3. Connect the switch or circuit to the repo connector on the rear of the ups using insulated size 18–20 awg (0.75 mm 2 – 0.5 mm 2 ) wire. Table 11. Repo connections wire function terminal wire size rating...

  • Page 39: Initial Startup

    Installation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 31 initial startup to start the ups for the first time: 1. Verify that the following installation procedures are completed: s the internal batteries are connected. S if an optional ebm is installed, the ebm i...

  • Page 40

    Installation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 32 6. To set the time and date, configure the ups for an installed ebm, or change other factory-set defaults, see “operation” on page 35. 7. If you installed an optional repo switch, verify that the function ...

  • Page 41

    Eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 33 chapter 4 shipping the ups in a rack the procedures in this chapter apply to a ups that is shipped assembled in a rack cabinet. Ok 100% 6 mi n 1500 va 208v/60hz ups on shipping bracket figure 16. Shipping bracket insta...

  • Page 42

    Shipping the ups in a rack eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 34 3. Remove the four screws that secure the front of the ups to the rack cabinet. Keep the four screws. 4. Align the shipping bracket with the front of the ups, with the support lip under the u...

  • Page 43: Control Panel

    Eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 35 chapter 5 operation this section describes basic operations. For detailed procedures, see the user's guide. Control panel figure 17 shows the display and controls on the front of the ups. Figure 17. Eaton 9910 control ...

  • Page 44: Turning On The Ups

    Operation eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 36 turning on the ups to turn on the ups, press the on/off button for approximately 1 second. The display changes from the start screen to the ups status summary screen and shows the standby icon flashing while ...

  • Page 45: Ups Manager Software

    Eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 37 chapter 6 communication features the eaton 9910 ups includes ups manager software, a usb port, an rs-232 port, and a communication bay. Each ups has two load segments. For more information about the communication featu...

  • Page 46: Communication Cards

    Communication features eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 38 communication cards communication cards allow the ups to communicate in a variety of networking environments and with different types of devices. The optional card must be purchased separately. N...

  • Page 47: Updating The Ups Firmware

    Eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 39 chapter 7 service and support updating the ups firmware to keep the ups firmware updated with the latest improvements and benefits, visit www.Eaton.Com/ibm often for updates. You can download the latest firmware versio...

  • Page 48

    Service and support eaton 9910 ups and ebm installation guide (6000 va models) s p-164000007 rev 1 40

  • Page 50

    *p-1640000071* p-164000007 1.