Eaton PPD-C-230V Product Manual
LOAD
8 Amp resistive and incandescent lighting
6 Amp fluorescent lighting
3 Amp compact fluorescent lighting
3 Amp low energy lighting
3 Amp low voltage lighting (switch primary of transformer)
Fluorescent lighting (max 6 fittings recommended)
For fluorescent lighting total power factor correction ca-
pacitance must not exceed 40μF.
3 Amp fans and ventilation equipment
Switch SON lighting loads via a contactor
SUPPLY VOLTAGE
220-240 Volts AC 50 Hz
TIME OUT PERIOD
Adjustable 10s to 30m
LIGHT LEVEL
Light to dark
TERMINAL CAPACITY 2.5 mm
2
MATERIAL
Flame retardant ABS
TYPE
Class 2
TEMPERATURE
-10°C to 35°C
CONFORMITY
EMC-2014/30/EU
LVD-2014/35/EU
Part Numbers
Specification
Detection Pattern
PPD-C-230V Ceiling mounted presence
detector
SB-C
Surface mounting back
box
SB-C-EX
Surface mounting back
box extender
Ref 9850-000578-00
#WD859 Issue
2.0
Eaton Lighting Systems
Usk House, Lakeside
Llantarnam Park,
Cwmbran, NP44 3HD, UK
Tel:
+44 (0)1633 838088
Fax: +44 (0)1633 867880
lightingcontrolsolutions@eaton.com
www.eatonlightingsystems.com
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in
accordance with the latest edition of the IEE wiring
regulations.
Due to our policy of continual product improvement we reserve the right to alter the
specification of this product without prior notice.
The PPD-C-230V series of presence detector switches are designed to provide automatic control of
lighting, heating or ventilation loads. They detect movement using a PIR sensor and turn the load on.
When an area is no longer occupied the load will switch off after an adjustable time out period.
An adjustable internal light sensor provides additional energy saving in lighting applications. When an
area is occupied lighting is only switched on when the level of natural light is below a preset level.
When the unit is first powered up the PIR sensor will always detect immediately regardless of whether
the room is occupied.
Overview
Product Guide
PPD-C-230V
Ceiling Presence Detector