Manual 12/2014 mn048014-en xp-503 panel pc.
Company information 2 xp-503 12/2014 mn048014-en www.Eaton.Com manufacturer eaton automation gmbh spinnereistrasse 8-14 ch-9008 st. Gallen switzerland www.Eaton.Eu www.Eaton.Com support region north america eaton corporation electrical sector 1111 superior ave. Cleveland, oh 44114 united states 877-...
Contents xp-503 12/2014 mn048014-en www.Eaton.Com 3 contents 1 general ............................................................................................................................... 5 1.1 purpose of this manual ...........................................................................
Contents 4 xp-503 12/2014 mn048014-en www.Eaton.Com 5.2.2 periphery ........................................................................................................................... 36 5.3 using the storage media ................................................................................
1 general 1.1 purpose of this manual xp-503 12/2014 mn048014-en www.Eaton.Com 5 1 general 1.1 purpose of this manual this manual contains all the information you will need in order to use the xp-503 panel pc safely and effectively. The manual is considered an integral part of the device and must alw...
1 general 1.3 additional documentation 6 xp-503 12/2014 mn048014-en www.Eaton.Com.
2 description of device 2.1 function xp-503 12/2014 mn048014-en www.Eaton.Com 7 2 description of device 2.1 function xp-503 panels can be used as control and monitoring devices. Xp-503 devices are the answer to the growing demand of machine and system manufacturers for high-precision, cost-effective...
2 description of device 2.3 device versions 8 xp-503 12/2014 mn048014-en www.Eaton.Com 2.3 device versions panel type part no. Article no. 10.1" widescreen industrial panel pc (galileo) • pct multitouch • 1.65 ghz cpu • 4gb ram • min. 32 gb of internal memory • min. 4 gb of cfast removable memory • ...
2 description of device 2.4 designation xp-503 12/2014 mn048014-en www.Eaton.Com 9 21.5" widescreen industrial panel pc (vd) • pct multitouch • 1.65 ghz cpu • 4gb ram • min. 32 gb of internal memory • min. 4 gb of cfast removable memory • windows embedded standard 7 • visual designer runtime license...
2 description of device 2.4 designation 10 xp-503 12/2014 mn048014-en www.Eaton.Com.
3 safety instructions 3.1 basics xp-503 12/2014 mn048014-en www.Eaton.Com 11 3 safety instructions 3.1 basics the device has been designed according to the state of the art and all generally accepted safety rules and standards. However, this alone cannot eliminate all potential hazards, which is why...
3 safety instructions 3.2 precautionary statements 12 xp-503 12/2014 mn048014-en www.Eaton.Com 3.2 precautionary statements danger danger signal word indicates an imminent hazardous situation that will result in death or serious injury if it is not avoided. Warning warning signal word indicates a po...
3 safety instructions 3.3 mandatory requirements, personnel requirements xp-503 12/2014 mn048014-en www.Eaton.Com 13 3.3 mandatory requirements, personnel requirements 3.3.1 occupational safety all generally accepted occupational health and safety rules and standards (internal and national) must be ...
3 safety instructions 3.3 mandatory requirements, personnel requirements 14 xp-503 12/2014 mn048014-en www.Eaton.Com 3.3.6 prerequisites for proper operation in order for the device to be able to meet the contractually stipulated terms, the following must be observed: only qualified personnel should...
3 safety instructions 3.4 device-specific hazards xp-503 12/2014 mn048014-en www.Eaton.Com 15 3.4 device-specific hazards danger explosion hazard death, serious injury, and property damage may occur if the device is being used in a potentially explosive (classified) location and, during operation, a...
3 safety instructions 3.4 device-specific hazards 16 xp-503 12/2014 mn048014-en www.Eaton.Com caution electrostatic discharge electrostatic discharges may damage or ruin assembly parts. Do not touch components (e.G., pins) that are electrostatic-sensitive. Discharge any static electricity from your ...
3 safety instructions 3.4 device-specific hazards xp-503 12/2014 mn048014-en www.Eaton.Com 17 caution uv light plastics may become brittle when exposed to uv light. This will reduce the device's lifespan. Protect the device from direct sunlight and lamps with uv radiation. Caution cleaning the devic...
3 safety instructions 3.4 device-specific hazards 18 xp-503 12/2014 mn048014-en www.Eaton.Com.
4 installation 4.1 safety instructions xp-503 12/2014 mn048014-en www.Eaton.Com 19 4 installation 4.1 safety instructions before installing and commissioning the device, make sure to read chapter 3, "safety instructions." chapter 3 contains important information regarding your own personal safety. 4...
4 installation 4.4 installing 20 xp-503 12/2014 mn048014-en www.Eaton.Com the following requirements and instructions must be observed without fail in order to ensure that the xp-503 will run properly and will not be damaged. 4.4.1 temperature prior to commissioning: - slowly let the device settle i...
4 installation 4.4 installing xp-503 12/2014 mn048014-en www.Eaton.Com 21 4.4.3 mounting position the device is designed to be built-in mounted in landscape mode. It can be mounted in a perfectly vertical position or at an angle of up to ±10° in the directions shown below. If the device is not mount...
4 installation 4.4 installing 22 xp-503 12/2014 mn048014-en www.Eaton.Com 4.4.5 fixing and sealing built-in mounting in cabinets, etc. The xp-503 is designed to be built-in mounted in control panels and swing frames. Caution the mounting cutout must be located in a position that ensures that webs or...
4 installation 4.4 installing xp-503 12/2014 mn048014-en www.Eaton.Com 23 ip-65-tight built-in mounting - peripheral gasket at the back of the front frame on the display housing polyurethane foam gasket material: raku-pur 31-3117, black abb. 4 polyurethane foam gasket device holding brackets - the p...
4 installation 4.5 preparing the device for operation 24 xp-503 12/2014 mn048014-en www.Eaton.Com 4.5 preparing the device for operation caution interference-proof connections for undisturbed operation for all signal connections, use screened cables and metal connectors only. All plug-in connections...
4 installation 4.6 connecting the power supply xp-503 12/2014 mn048014-en www.Eaton.Com 25 4.6 connecting the power supply before connecting the power supply caution please note: does the voltage fall within the permissible input range? Functional earth: connect the earth point to the cabinet's eart...
4 installation 4.7 using peripheral devices 26 xp-503 12/2014 mn048014-en www.Eaton.Com plug-in connection for 24 v dc on the back of the device, at the bottom of the computer housing: basic enclosure mstba 2.5/ 3-g-5.08 3-pole, grid: 5.08 mm phoenix contact article no.: 1757255 connector section ms...
4 installation 4.8 external connections xp-503 12/2014 mn048014-en www.Eaton.Com 27 4.8 external connections the external interfaces described below can be accessed on the back of the device, at the bottom of the computer housing. 4.8.1 ethernet connections two ethernet connections, each with its ow...
4 installation 4.8 external connections 28 xp-503 12/2014 mn048014-en www.Eaton.Com 4.8.2 usb connections two 9-pole usb ports, type a, for connecting usb peripherals. Type a usb 9-pole pin signal description 1 usb vcc +5 v power 2 usb – data – 3 usb + data + 4 gnd ground 5 ss_rx – twisted with rx +...
4 installation 4.8 external connections xp-503 12/2014 mn048014-en www.Eaton.Com 29 4.8.4 serial interfaces rs 485/232 one serial interface on a 9-pole sub-d plug that can be used as an rs 232, rs 422, or rs 485 port, configurable in the bios. 1 × sub-d plug, 9-pole pin rs 232 rs 422 rs 485 1 dcd rx...
4 installation 4.8 external connections 30 xp-503 12/2014 mn048014-en www.Eaton.Com.
5 commissioning and operation 5.1 adding expansions to the xp-503 xp-503 12/2014 mn048014-en www.Eaton.Com 31 5 commissioning and operation 5.1 adding expansions to the xp-503 5.1.1 general prerequisites limitation of liability all technical data, certifications, and approvals will cease to apply/be...
5 commissioning and operation 5.1 adding expansions to the xp-503 32 xp-503 12/2014 mn048014-en www.Eaton.Com before opening caution please note: shut down the operating system. Disconnect the power supply. Disconnect all connection cables from the xp-503. Remove the cfast card before opening the ho...
5 commissioning and operation 5.1 adding expansions to the xp-503 xp-503 12/2014 mn048014-en www.Eaton.Com 33 close when closing the device, follow the same steps you used to open it, but in opposite order..
5 commissioning and operation 5.2 connecting peripheral devices 34 xp-503 12/2014 mn048014-en www.Eaton.Com 5.2 connecting peripheral devices 5.2.1 interfaces connection locations the ports used to connect peripherals are located on the back of the housing. These connections are accessible at the bo...
5 commissioning and operation 5.2 connecting peripheral devices xp-503 12/2014 mn048014-en www.Eaton.Com 35 connections layout the connections listed below are the external interfaces on the computer board installed in the xp-503. They can be found on the back of the device, at the bottom of the com...
5 commissioning and operation 5.2 connecting peripheral devices 36 xp-503 12/2014 mn048014-en www.Eaton.Com 5.2.2 periphery connected devices must have the ce mark (for industrial environments!). An external keypad can be used simultaneously with the touch panel. Keypad the xp-503 has been designed ...
5 commissioning and operation 5.3 using the storage media xp-503 12/2014 mn048014-en www.Eaton.Com 37 5.3 using the storage media 5.3.1 cfast memory card the cfast slot can be accessed at the bottom of the computer housing. The card adapter is screwed onto the computer housing's cover and is connect...
5 commissioning and operation 5.3 using the storage media 38 xp-503 12/2014 mn048014-en www.Eaton.Com caution note: before changing the card, the device must be disconnected from the power supply. If you install a card adapter, make sure that you use the cfast cards compatible with it. A cover must ...
5 commissioning and operation 5.3 using the storage media xp-503 12/2014 mn048014-en www.Eaton.Com 39 changing the cfast memory card example: xp-503-15 the following also applies to other device versions as applicable. Loosen the thumbscrew (knurled head screw) and remove the cfast adapter slot's co...
5 commissioning and operation 5.4 using the xp-503 40 xp-503 12/2014 mn048014-en www.Eaton.Com 5.4 using the xp-503 touch panel projected capacitive touch panel (pct) multi-touch capable 4-point touch operation 2-point touch operation when using the emc touch sensitivity setting the device features ...
5 commissioning and operation 5.5 safety instructions xp-503 12/2014 mn048014-en www.Eaton.Com 41 warning risk of functions being triggered accidentally by conductive material in soiling if the device's touch panel is soiled, any conductive material present in the dirt may trigger unexpected operato...
5 commissioning and operation 5.5 safety instructions 42 xp-503 12/2014 mn048014-en www.Eaton.Com warning performing gestures incorrectly on the touch panel with multi-touch capabilities if gestures are performed incorrectly on the touch panel with multi-touch capabilities, they may not be recognize...
5 commissioning and operation 5.5 safety instructions xp-503 12/2014 mn048014-en www.Eaton.Com 43 sleeptime caution if the hibernation function is used, the image shown on the device may change after the device wakes up from hibernation. Disabling hibernation to disable hibernation in the windows op...
5 commissioning and operation 5.5 safety instructions 44 xp-503 12/2014 mn048014-en www.Eaton.Com static touch panel contact caution contacts and gestures in which fingers do not move on the touch panel for more than 10 seconds will be recognized as "static contact." if the device detects this type ...
5 commissioning and operation 5.6 xp-503 with windows embedded standard 7 xp-503 12/2014 mn048014-en www.Eaton.Com 45 5.6 xp-503 with windows embedded standard 7 the xp-503 standard devices are pre-installed with the microsoft windows embedded standard 7 operating system. If your xp-503 is not a sta...
5 commissioning and operation 5.6 xp-503 with windows embedded standard 7 46 xp-503 12/2014 mn048014-en www.Eaton.Com protect-mode data organization c:\ drive protected by protect mode when enabled files to be installed and changed only at initial device setup and should remain unchanged under norma...
5 commissioning and operation 5.6 xp-503 with windows embedded standard 7 xp-503 12/2014 mn048014-en www.Eaton.Com 47 disabling protect mode protect mode is active and enabled at the factory but it is possible for the user to disable the protect mode feature of the xp-503. Reasons for doing so inclu...
5 commissioning and operation 5.6 xp-503 with windows embedded standard 7 48 xp-503 12/2014 mn048014-en www.Eaton.Com 5.6.2 managing accounts and auto logon functionality managing accounts there is an “administrator” user account set up on your eaton xp-503 unit when shipped from the factory. User: ...
5 commissioning and operation 5.6 xp-503 with windows embedded standard 7 xp-503 12/2014 mn048014-en www.Eaton.Com 49 following dialog box appears: use the check box "users must enter a user name and password to use this computer" to enable/disable the auto logon feature. Check box “checked”: auto l...
5 commissioning and operation 5.6 xp-503 with windows embedded standard 7 50 xp-503 12/2014 mn048014-en www.Eaton.Com 5.6.3 touch parameters the xp-503's touch panel has three sensitivity settings available. To select one of them, follow the steps below: option "1": default (factory setting) for exa...
5 commissioning and operation 5.6 xp-503 with windows embedded standard 7 xp-503 12/2014 mn048014-en www.Eaton.Com 51 once the program is successfully completed, the following line will appear: "firmware update success". The program will return to the starting screen. Select '0'. Press the enter key...
5 commissioning and operation 5.6 xp-503 with windows embedded standard 7 52 xp-503 12/2014 mn048014-en www.Eaton.Com 5.6.4 license eaton galileo-open runtime xp-503 device types, which are licensed for eaton galileo open runtime, are licensed at the factory for the galileo runtime software and enab...
6 maintenance and repairs 6.1 safety instructions xp-503 12/2014 mn048014-en www.Eaton.Com 53 6 maintenance and repairs 6.1 safety instructions before working with the device, make sure to read chapter 3, "safety instructions". Chapter 3 contains important information regarding your own personal saf...
6 maintenance and repairs 6.3 repairs 54 xp-503 12/2014 mn048014-en www.Eaton.Com 6.3 repairs the device should only be opened by the manufacturer or by an authorized repair center. For repairs, please contact your vendor or eaton's technical support. Use the original packaging to ship the device..
7 storage, transport and disposal 7.1 safety instructions xp-503 12/2014 mn048014-en www.Eaton.Com 55 7 storage, transport and disposal 7.1 safety instructions before installing and commissioning the device, make sure to read chapter 3, "safety instructions". Chapter 3 contains important information...
7 storage, transport and disposal 7.4 disposal 56 xp-503 12/2014 mn048014-en www.Eaton.Com 7.4 disposal danger explosive and toxic materials the lithium battery inside the device may explode if handled incorrectly. Dispose of the device professionally. Devices no longer being used must be profession...
8 technical data 8.1 dimensions for xp-503 with 25.65 cm (10.1") display xp-503 12/2014 mn048014-en www.Eaton.Com 57 8 technical data 8.1 dimensions for xp-503 with 25.65 cm (10.1") display 8.1.1 front dimensions xp-503-10 abb. 12 xp-503-10 – front dimensions.
8 technical data 8.1 dimensions for xp-503 with 25.65 cm (10.1") display 58 xp-503 12/2014 mn048014-en www.Eaton.Com 8.1.2 device dimensions xp-503-10 abb. 13 xp-503-10 – device dimensions iso 2768mk general tolerances.
8 technical data 8.1 dimensions for xp-503 with 25.65 cm (10.1") display xp-503 12/2014 mn048014-en www.Eaton.Com 59 8.1.3 fitting dimensions xp-503-10 recommended mounting cutout abb. 14 xp-503-10 – fitting dimensions iso 2768mk general tolerances.
8 technical data 8.2 dimensions for xp-503 with 39.6 cm (15.6") display 60 xp-503 12/2014 mn048014-en www.Eaton.Com 8.2 dimensions for xp-503 with 39.6 cm (15.6") display 8.2.1 front dimensions xp-503-15 abb. 15 xp-503-15 – front dimensions.
8 technical data 8.2 dimensions for xp-503 with 39.6 cm (15.6") display xp-503 12/2014 mn048014-en www.Eaton.Com 61 8.2.2 device dimensions xp-503-15 abb. 16 xp-503-15 – device dimensions iso 2768mk general tolerances.
8 technical data 8.2 dimensions for xp-503 with 39.6 cm (15.6") display 62 xp-503 12/2014 mn048014-en www.Eaton.Com 8.2.3 fitting dimensions xp-503-15 recommended mounting cutout abb. 17 xp-503-15 – fitting dimensions iso 2768mk general tolerances.
8 technical data 8.3 dimensions for xp-503 with 54.6 cm (21.5") display xp-503 12/2014 mn048014-en www.Eaton.Com 63 8.3 dimensions for xp-503 with 54.6 cm (21.5") display 8.3.1 front dimensions xp-503-21 abb. 18 xp-503-21 – front dimensions.
8 technical data 8.3 dimensions for xp-503 with 54.6 cm (21.5") display 64 xp-503 12/2014 mn048014-en www.Eaton.Com 8.3.2 device dimensions xp-503-21 abb. 19 xp-503-21 – device dimensions iso 2768mk general tolerances.
8 technical data 8.3 dimensions for xp-503 with 54.6 cm (21.5") display xp-503 12/2014 mn048014-en www.Eaton.Com 65 8.3.3 fitting dimensions xp-503-21 recommended mounting cutout abb. 20 xp-503-21 – fitting dimensions iso 2768mk general tolerances.
8 technical data 8.4 general 66 xp-503 12/2014 mn048014-en www.Eaton.Com 8.4 general component description device system built-in mounting panel pc built-in device secured with the help of holding brackets housings industrial housing design built to meet emc requirements display housing (incl. Front...
8 technical data 8.4 general xp-503 12/2014 mn048014-en www.Eaton.Com 67 display 10.1" part no. Color active-matrix tft-lcd screen size diagonal 25.65 cm (10.1") visible screen area 222.72 mm x 125.28 mm display resolution [w x h] wsvga / 1024 x 600 pixels format 16:9 viewing range [left/right/above...
8 technical data 8.4 general 68 xp-503 12/2014 mn048014-en www.Eaton.Com tab. 13 technical data cooling fanless cpu and system cooling, natural convection-based passive cooling computer platform single-board computer 3.5" card format (102 mm x 147 mm) amd radeon hd8000 chipset bios ami uefi cpu amd ...
8 technical data 8.4 general xp-503 12/2014 mn048014-en www.Eaton.Com 69 supply voltage 24 v dc 1) 18..36 v dc (selv) power consumption xp-503-10 max. 1.2 a xp-503-15 max. 1.5 a xp-503-21 max. 1.7 a mechanical dimensions depends on the specific device version weight xp-503-10 2.70 kg xp-503-15 4.95 ...
8 technical data 8.5 directives and standards 70 xp-503 12/2014 mn048014-en www.Eaton.Com 8.5 directives and standards degree of protection / tightness ip65 in the front as per en 60529-1 ip20 in the front as per en 60529-1 nema12 as per nema 250-2003 emc as per 2004/108/ec emc directive emitted int...