EAW DC5 Specifications
SPECIFICATIONS DC5
FEATURES
PERFORMANCE
APPLICATION
DESCRIPTION
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
info@eaw.com
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
DC5/2 pp
October 2001
Printed in USA
Frequency Response
±3 dB
80 Hz to 18 kHz
-10 dB
50 Hz
Axial Sensitivity (dB SPL, 1 watt @ 1 m)
Full Range
97
Nominal Input Impedance (ohms)
Full Range
8
Power Handling (watts, continuous)
Full Range
500
Calculated Output Limit (dB SPL @ 1 m)
Full Range Peak
130
Full Range Long Term
124
Nominal Beamwidth (degrees @ -6 dB SPL)
Horizontal
90
Vertical
45
Product Group
Avalon
Configuration
2-way full-range
Powering
Full-range (passive LF/HF
crossover)
LF Subsystem
1x 12-in woofer, vented
HF Subsystem
1x 1.4-in exit/3-in voice coil
compression driver on CD horn
Enclosure Material
Exterior-grade Baltic birch plywood
Finish
Wear-resistant textured black paint
Connectors
2x Neutrik NL4 Speakon
Suspension Hardware
11x 3/8”-16 threaded mounting
points (4 top, 3 per side, 1 back)
Grille
Zinc coated perforated steel
Dimensions
inches
millimeters
Height (front)
15.6
395
Height (rear)
12.0
306
Width
30.0
762
Depth
13.7
346
Weights
pounds
kilograms
Net Weight
65
29.6
Shipping Weight
77
35.0
PHYSICAL
• Compact two-way system for small dance clubs
• Very effective as a high-output DJ booth monitor
• One 12-in woofer, vented
• Horn-loaded 1.4-in exit/3-in voice coil HF compression
driver
• Cutaway rear corner directs coverage down from its position
close to a ceiling
The DC5 is engineered for use in permanent installations. The
system includes a 12-in woofer in an optimally vented enclo-
sure and a 1.4-in exit/3-in voice coil high frequency com-
pression driver on a 90° (h) x 45° (v) dispersion constant direc-
tivity horn. A complex asymmetrical internal passive
crossover/filter network provides subsystem integration,
ensuring coherent summation throughout the transition.
The DC5 compact, passive two-way dance club system pro-
vides high output, high definition reinforcement for small
clubs or smaller spaces within clubs. Overall design is robust
to ensure reliability in the face of continuous peak output
operation.
The DC5 is designed for overhead mounting in a horizontal
configuration to cover small dance floors or auxiliary spaces
within larger clubs. It is also very effective when used as a
high-output reference monitor in DJ booths. Its cutaway
upper-rear corner allows it to tuck up next to the ceiling
while angling its coverage down 20°. The enclosure includes
balance-optimized threaded mounting points.
Like all EAW products, it can be special ordered in virtually
any color to match a specific décor. Six year warranty.