EAW JFX290 Specifications
SPECIFICATIONS JFX290
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
info@eaw.com
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
JFX290/0004641/2 pp
September 2002
Printed in USA
Part Number
0002821
System Configuration
2-way, full-range
Powering Switchable:
Passive
(LF/HF
crossover) or bi-amplified
LF Subsystem 1x 12-in, vented
HF Subsystem
1x 1.4-in exit/3-in voice coil
neodymium compression driver
on CD horn
Controls (switches, knobs)
Powering mode switch
Recommended High-Pass
Frequency (24 dB/octave)
60 Hz
Enclosure Materials
Exterior grade Baltic birch plywood
Finish
Wear resistant textured black paint
Connectors
2x Neutrik NL4 Speakon
Hardware
Pole mount cup (bottom); 2x 3-
position fly track (bottom); 1x
11-position fly track (top); 4x
5/16”-18 mounting points for
Omnimount Series 300 (rear)
Grille
Powder coated perforated steel,
foam backed
Frequency Response (1 W @ 1 m)
±3 db
90 Hz to 16 kHz
-10 dB
60 Hz
Axial Sensitivity (dB SPL, 1 W @ 1 m)
Full Range
97
LF
97
HF
104
Impedance (Ohms)
Full Range 8
LF
8
HF
8
Power Handling (Watts, continuous)
Full Range
500
LF
500
HF
200
Calculated Maximum Output (dB SPL @ 1 m)
Full Range Peak
130
LF/HF Peak
130/133
Full Range Long Term
124
LF/HF Long Term
124/127
Nominal Coverage Angle / -6 dB points (degrees)
Horizontal
90
Vertical
45
PERFORMANCE
• Ideal size and performance for rigorous all-purpose use
• Wide 90° coverage optimized for use in stand-alone
applications
• HF compression driver and vented LF for fully professional
performance
• Asymmetric enclosure provides multiple mounting angles
• Pole mount cup & fly track, plus Omnimount®
Series 300 or similar mounting points
• Passive or bi-amplified operating modes
The JFX290 is a 2-way multi-purpose loudspeaker. Its multi-
functional design adds considerably to its value as a full-
range loudspeaker. Combining high output and natural repro-
duction, it is specifically outfitted to serve in a variety of
both portable and permanent applications. The asymmetric
enclosure provides typical angles needed for ceiling and wall
mounting as well as for stage monitor operation. For perma-
nent installation, enclosure hardware includes mounting
points for an Omnimount® Series 300 or similar bracket and
fly track for suspension. Provisions for portable use include a
pole mount cup, top/bottom fly track for rigging, and handles
integral to the enclosure that facilitate handling and trans-
port. The JFX290 is particularly suitable as a near field main
loudspeaker or as a fill/delay element in larger systems.
While the JFX290 is well suited as is for many applications,
the addition of a subwoofer expands its capabilities for more
demanding applications such as for houses of worship, theaters,
and band PA. Six year warranty.
• Portable systems or permanent installations
• Wall and ceiling mountings
• Ideal size and output for wide range of
program material
• Main PA reinforcement in medium- to
large-sized spaces
• Downfill for flown clusters
• High SPL stage lip / delay fill
• A/V and/or surround sound installations
• Voice & F/X reinforcement in themed attractions
FEATURES
DESCRIPTION
APPLICATION
PHYSICAL