EAW JFX560 Specifications

SPECIFICATIONS JFX560

One Main Street, Whitinsville, MA 01588

508 234 6158

Toll Free 800 992 5013

FAX 508 234 8251

info@eaw.com

www.eaw.com

EAW products are continually improved. All specifications are therefore subject to change without notice.

JFX560/0004642/2 pp

September 2002

Printed in USA

Part Number

0002880

System Configuration

2-way, full-range

Powering Switchable: 

Passive 

LF/HF 

crossover or bi-amplified

LF Subsystem  1x 15-in, vented

HF Subsystem

1x 1.4-in exit/3-in voice coil 

neodymium compression driver 

on CD horn

Controls (switches, knobs)

Powering mode switch

Recommended High-Pass 

Frequency (24 dB/octave)

55 Hz

Enclosure Materials

Exterior grade Baltic birch plywood

Finish

Wear resistant textured black paint

Connectors

2x Neutrik NL4 Speakon

Hardware

Pole mount cup (bottom); 2x 3-

position fly track (bottom); 1x 

11-position fly track (top); 4x 

5/16”-18 suspension points for 

Omnimount Series 300 (rear)

Grille

Powder coated perforated steel, 

foam backed

Frequency Response (1 W @ 1 m)

±3 dB

80 Hz to 15 kHz

-10 dB

55 Hz

Axial Sensitivity (dB SPL, 1 W @ 1 m)

Full Range

98

LF

98

HF

104

Impedance (Ohms)

Full Range  8

LF

8

HF

8

Power Handling (Watts, continuous)

Full Range

500

LF

800

HF

200

Calculated Maximum Output (dB SPL, @ 1m)

Full Range Peak

131

LF/HF Peak

133/133

Full Range Long Term

125

LF/HF Long Term

127/127

Nominal Coverage Angle / -6 dB points (degrees)

Horizontal

60

Vertical

45

PHYSICAL

PERFORMANCE

• Ideal size and performance for rigorous all-purpose use

• 60° coverage permits creation of optimized horizontal 

arrays

• HF compression driver and vented LF for fully professional 

performance

• Asymmetric enclosure provides multiple mounting angles

• Pole mount cup & fly track, plus Omnimount®    

Series 300 or similar mounting points 

• Passive or bi-amplified operating modes

The JFX560 is a 2-way multi-purpose loudspeaker. Its multi-

functional design adds considerably to its value as a full-

range loudspeaker.  Combining high output and natural repro-

duction, it is specifically outfitted to serve in a variety of

both portable and permanent applications.  The asymmetric

enclosure provides typical angles needed for ceiling and wall

mounting as well as for stage monitor operation.  For perma-

nent  installation, enclosure hardware includes mounting

points for an Omnimount® Series 300 or similar bracket and

fly track for suspension.  Provisions for portable use include a

pole mount cup, top/bottom fly track for rigging, and handles

integral to the enclosure that facilitate handling and trans-

port. The JFX560 is particularly suitable as a near field main

loudspeaker or as a fill/delay element in larger systems.

While the JFX560 is well suited as is for many applications,

the addition of a subwoofer expands its capabilities for more

demanding applications such as for houses of worship, theaters,

and band PA. Six year warranty.

• Portable systems or permanent installations

• Wall and ceiling mountings

• Ideal size and output for wide range of 

program material

• Main PA reinforcement in medium- to 

large-sized spaces

• Downfill for flown clusters

• High SPL stage lip / delay fill

• A/V and/or surround sound installations

• Voice & F/X reinforcement in themed attractions

FEATURES

DESCRIPTION

APPLICATION