EAW KF730P Specification Sheet
Eastern Acoustic Works One Main Street Whitinsville, MA 01588 tel 800 992 5013 / 508 234 6158 fax 508 234 8251 www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
Part Number: RDxxxx (A) KF730P SPEC Preliminary
March 2004
K F 7 3 0 P
S p e c i f i c a t i o n s
group · M
FEATURES
•
Highest output to size ratio for small format line arrays
•
Large MF/HF horn and Phase Aligned™ LF drivers for
exceptional 110° horizontal pattern to 160 Hz
•
KF730 Wizard auto-designs flown and ground-stacked arrays
•
Included Splay Brackets fix the splay angles between enclosures
•
16 ohm inputs allow powering 8 KF730s with 2 amplifier channels
DESCRIPTION
The KF730P Series is a compact, fixed installation, line array
system that sets a performance benchmark above similar systems.
It delivers 3-way, KF Series performance in a flexible, easy-to-use
system that can deliver concert-level output in an exceptionally
wide range of venues. The KF730P is an excellent solution for fixed
installation applications such as houses of worship, theatres, hotel
ballrooms, arenas, and concert halls. The system is also ideal for
supplemental coverage for larger line arrays, such as the KF760
Series. Such uses include audience side fill, delayed arrays for
balconies, and stage/performer coverage.
One large MF/HF horn fills the entire face of the enclosure, better
maintaining horizontal pattern control throughout the MF/HF
passband. The curved aperture MF loading slots effectively
move the MF acoustic origin further into the horn than physical
space permits. The side-mounted LF drivers provide a forward-
firing, figure eight type pattern. The drivers are spaced so that
the LF beamwidth matches the MF through crossover.
The KF730P input features barrier strip terminals. A separate
terminal strip is provided for loop-through connection for daisy-
chaining additional KF730Ps.
The KF730P is configured using
the included KF730P Splay Angle Brackets to bolt the
enclosures together. This rigging system is fully compatible with
the companion SB730P subwoofer. Six year warranty.
3-WAY FULL-RANGE BI-AMP (passive MF/HF filter)
Performance is for a single KF730P. Array performance is determined using the KF730 Wizard.
See TABULAR DATA notes for details
CONFIGURATION
Subsystem
Transducer
Loading
LF
2x 10 in cone
Phase Aligned™
MF
2x 7 in cone
Horn-loaded
HF
2x 1 in exit, 1.75 in voice
Horn-loaded
coil neodymium
compression driver
Operating Mode
Amplifier Channels
External Signal Processing
Bi-amp
LF, MF/HF
DSP w/2-way filters
PERFORMANCE
1
Operating Range
80 Hz to 20 kHz
Nominal Beamwidth
Horz
110°
Vert
12°
Axial Sensitivity (whole space SPL)
MF/HF
105 dB
230 Hz to 20 kHz
LF
91 dB
80 Hz to 230 Hz
Peak Sensitivity (whole space SPL)
MF/HF
112 dB
20 Hz to 20 kHz
LF
92 dB
20 Hz to 20 kHz
Input Impedance (ohms)
Nominal
Minimum
MF/HF
16
15.9 @ 680 Hz
LF
16
15.1 @ 250 Hz
Recommended High Pass Filter
High Pass
=>80 Hz, 24 dB/octave
Accelerated Life Test
2
MF/HF
75 V
350 W @ 16 ohm
LF
106 V
700 W @ 16 ohm
Calculated Axial Output Limit (whole space SPL)
Average
Peak
MF/HF
130 dB
136 dB
LF
119 dB
125 dB
ORDERING DATA
Description
Part Number
KF730P Black Line Array Loudspeaker
0007663
KF730P White Line Array Loudspeaker
0009645
Optional Accessories
KF730P/SB730P Fly-Bar
0008108
KF730P Pull-Bar
0008363
1 To achieve specified performance, the listed external signal processing with EAW-provided settings is required.
2 For recommendations to select power amplifier size refer to : “HOW MUCH AMPLIFIER POWER DO I NEED?” on the EAW web site.