EAW KF850EF Technical Specifications - Technical Specifications
Acoustic Performance Partnership
Eastern Acoustic Works
KF850EF
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email info@eaw.com
AC
OU
ST
ICA
L P
ERFOR
MANCE P
ART
NE
RSH
IP
TECHNICAL SPECIFICATIONS
KF850EF
DIMENSIONAL DRAWINGS
DIMENSIONAL DRAWING
SERVICE ITEMS
LF: Complete Cone Driver:
EAW Part No.
804036
MF: Complete Cone Driver
EAW Part No.
804022
HF: Complete Compression Driver/Tweeter
EAW Part No.
803011
Filter/Crossover Network: Complete Assembly
EAW Part No.
201062
ARCHITECTURAL SPECIFICATIONS
The three-way full range loudspeaker systems shall incorpo-
rate a 15-in LF transducer, a 10-in cone MF transducer and a
2-in exit compression driver HF transducer.
The LF driver shall be mounted in a wave guide cavity for
optimum low frequency directivity. The MF driver shall be
loaded into a midrange horn constructed of 3mm birch ply-
wood reinforced with high density polyurethane foam. The
MF horn shall incorporate a phase/displacement plug. The
HF driver shall be mounted in the wave guide cavity directly
in front of the LF driver and shall be loaded on a constant
directivity horn with a nominal coverage pattern of 55
°
(h)
x 40
°
(v). An acoustical filter shall be installed in the LF
waveguide cavity behind the HF section to absorb refracted
HF energy. An internal filter network shall provide system
equalization.
System frequency response shall vary no more than
±
3 dB
from 86 Hz to 17 kHz measured on axis. The low frequency
section shall produce a Sound Pressure Level (SPL) of 102 dB
SPL on axis at 1 meter with a power input of 1 Watt, and
shall be capable of producing a peak output of 138 SPL on
axis at 1 meter. It shall handle 1000 Watts of amplifier power
(AES Standard) and shall have a nominal impedance of 8
Ohms. The midrange frequency section shall produce a Sound
Pressure Level (SPL) of 109 dB SPL on axis at 1 meter with a
power input of 1 Watt, and shall be capable of producing a
peak output of 141 SPL on axis at 1 meter. It shall handle
400 Watts of amplifier power (AES Standard) and shall have
a nominal impedance of 8 Ohms. The high frequency section
shall produce a Sound Pressure Level (SPL) of 112 dB SPL on
axis at 1 meter with a power input of 1 Watt, and shall be
capable of producing a peak output of 141 SPL on axis at 1
meter. It shall handle 200 Watts of amplifier power (AES
Standard) and shall have a nominal impedance of 10 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of 15mm thickness void-free cross-grain-
laminated Baltic birch plywood and shall employ extensive
internal bracing. It shall be finished in black catalyzed poly-
urethane. Input connectors shall be one each male and fe-
male AP6. A total of four 19-positition flytracks (2 each top
and bottom) shall be provided. The front of the loudspeaker
shall be covered with a vinyl coated perforated steel grill
backed with open cell foam to protect against dust.
The three-way full range loudspeaker shall be the EAW model
KF850EF.
13.00
12.50
4.25
17.75
42.00
16.50
26.38
42.00
MOUNTING
POINT
1.75
3.91
7.00
29.91
19.00
2.25
11.00
10.63
TOP
29.50
FRONT
SIDES
BOTTOM
20.50
29.50
13.19
16.50
2.00
MOUNTING POINTS ARE RECESSED MULTI-POINT AIRCRAFT SEAT
FLY TRACK ATTACHED VERTICALLY AND HORIZONTALLY TO THE CABINET'S
ALUMINUM INTERNAL STRUCTURAL BRACES.
9.5
°
BACK
1.75
3.25
BACK
KF850EF
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED.
CENTER OF BALANCE.
510001
exp 11/1/96 shb