EAW KF913 Specifications
SPECIFICATIONS KF913
PHYSICAL
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
info@eaw.com
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
KF913/888058(B)/2 pp
5/1/00
Printed in USA
FEATURES
DESCRIPTION
PERFORMANCE
APPLICATION
• Medium throw/downfill HF Phased PointSource
Technology™ module
• 3x 2-in HF on separate SimplePhase™ horns
• PPST™ systems build arrays for the largest spaces
• Pre-configured DSP defines coverage by integrating
cells and modules to fit its application
• P (install) or F (portable) versions available
A dedicated PPST™ medium throw/downfill high frequency
system in a trapezoidal enclosure. Includes 3x 2-in exit com-
pression drivers on SimplePhase™ horns.
The KF913 PPST™ downfill HF module is engineered for use in
KF900 Series arrays. It provides HF coverage from -0° to -60°
below the array. KF900 Series modules can only be used in
arrays and must be integrated with complex PPST processing.
Six year warranty.
Applications include:
Stadiums
Concert Tours
Frequency Response (1 Watt @ 1m)
±3 dB
500 Hz to 14 kHz
-10 dB
400 Hz to 16 kHz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
HF
114
Impedance (Ohm)
HF
3x 8
Power Handling, AES Standards (Watts)
3x 200
Recommended Amplifier Power (Watts)
HF (MF/HF)
3x 400
Calculated Maximum Output (dB SPL @ 1m)
HF Peak
148.0
HF Long Term
141.0
Nominal Coverage Angle, -6 dB Points (degrees)
Horizontal
30
Vertical
Beam profile adjustable via
PPST™ processing
Recommended High-Pass Frequency
24 dB/Octave
1250 Hz, 500 Hz Minimum
Recommended Complementary Systems
Sub
KF940
LF
KF930
Mid/High
KF920/KF910
HF Subsystem
3X 2-in exit compression drivers
on 30° (H) SimplePhase horns
Configuration
Dedicated HF, medium throw,
downfill
Powering
Active processing
System Crossover
800 Hz to 1300 Hz
Controls (switches, knobs)
None
Cabinet Type (shape)
Trapezoidal
Enclosure Materials
Baltic birch plywood
Finish
Black catalyzed polyurethane
Connectors
One each male and female AP6
Suspension Hardware
(16) 3/8”-16 threaded mounting
points (4 each top, bottom and
sides)
Grille
Vinyl coated perforated steel,
foam backed
Dimensions
inches
millimeters
Height
46.00
1168
Width (front)
30.00
762
Width (rear)
8.56
217
Depth
40.00
1016
Trapezoid Angle
15° per Side
Weights
pounds
kilograms
Net Weight
258
117.4
Shipping Weight
266
121.0
Prototype shown with temporary hardware