EAW MQ1312 Specifications
Frequency Response (1 W @ 1m)
±3 dB
50 Hz to 1.6 kHz
-10 dB
40 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
LF
100
Impedance (Ohms)
LF
3x 8
Power Handling, AES Standard (Watts)
LF
1500
Calculated Maximum Output (dB SPL)
LF Peak
137.8
LF Long Term
131.8
Nominal Coverage Angle/-6 dB points (degrees)
Horizontal
160
Vertical
60
Recommended High-Pass Frequency
24 dB/Octave 40 Hz
• Low frequency loudspeaker system
• Optimized for permanent installation only
• 3x direct radiating 12-in woofers
• Optimized to array with MQ1364, MQ1366 and
MQ1394
The new MQ Series represents the next generation of perma-
nent installation loudspeaker systems. The Series comprises
matched sets of mid/high and low frequency enclosures that
enjoy complementary dimensions and trapeziod angles to
facilitate the creation of optimized-coverage arrays. The
MQ1312 uses three direct radiating 12-in woofer cones in an
optimally tuned, vented enclosure.
The MQ1312 low frequency module works with the MQ1364,
MQ1366 and MQ1394 mid/high modules to create arrays for
use in a wide variety of permanently installed applications.
The most common array configuration is 2x MQ1364’s or
MQ1366’s separated by a single MQ1312. In such an array, a
certain amount of splay must be provided to achieve optimal
coverage.
When arraying 2x MQ1394’s separated by a single MQ1312,
the modules should be tight packed to achieve optimal cov-
erage. This provides an excellent center channel array for
large, fan-shaped venues that use an L/C/R configuration.
All MQ Series enclosures feature a comprehensive system of
3/8”-16 threaded mounting points for maximum flexibility
when suspending arrays overhead.
Applications include:
Large Houses of Worship
Arena
Stadiums
Theater
Performing Arts Center
SPECIFICATIONS MQ1312
FEATURES
DESCRIPTION
PERFORMANCE
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
info@eaw.com
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
MQ1312/888140/2 pp
4/1/00
Printed in USA
APPLICATION
PHYSICAL
Configuration Dedicated low frequency loud
speaker
LF Subsystem 3x 12-in woofers
Cabinet Type (shape) Trapezoid
Enclosure Materials Baltic birch plywood
Finish Black polyurethane
Connectors 6-terminal barrier strip & 2x
Neutrik NL4 Speakon
Suspension Hardware (16) 3/8"-16 threaded mounting
suspension points (4 each top,
bottom and sides)
Grille Powder coated perforated steel
Dimensions
inches
millimeters
Height 40
1016
Width (front) 24
610
Width (rear) 12.75
324
Depth 21
533
Trapezoid Angle 30°
Weights
pounds
kilograms
Net Weight 125
56.9
Shipping Weight 131
56.6