EAW MQH1344e Specifications
Frequency Response
±3 dB
75 Hz to 15 kHz
-10 dB
43 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
LowerLF
92
Upper LF
94
MF
111
HF
111
Impedance (Ohms)
Lower LF
8
Upper LF
8
MF
8
HF
8
Power Handling, AES Standard (Watts)
Lower LF 600
Upper LF
600
MF 400
HF 150
Calculated Maximum Output (dB SPL @ 1m)
Lower LF Peak
126.0
Upper LF Peak 128.0
MF Peak
143.0
HF Peak
139.0
Lower LF Long Term
120.0
Upper LF Long Term 122.0
MF Long Term
137.0
HF Long Term
133.0
Nominal Coverage Angle, -6 dB Points (degrees)
Horizontal
40
Vertical
40
Recommended High-Pass Frequency
24 dB/Octave
45 Hz
• Full-range, 3-way system
• 2x slot-loaded 15-in LF; horn-loaded 10-in MF; 2-in
Neodymium HF
• LF woofers spaced for directional control to below 200 Hz
• Asymmetrical (down-angled) 40° x 40° beamwidth
A 3-way, quad-amplified full-range system in a vented trape-
zoidal enclosure. Includes dual, slot-loaded 15-in woofers, a
horn-loaded 10-in MF cone with Radial Phase Plug™, and a 2-
in exit/3-in diaphragm Neodymium compression driver. The
MF and HF horns provide an asymmetrical 40° x 40°
beamwidth. The enclosure is vertically configured for array-
ing in horizontal rows, and features a comprehensive system
of 3/8”-16 threaded suspension points.
The MQH1344e represents a highly specialized approach
developed to solve difficulties in larger venues. It provides
unique, down-angled coverage by using specially designed
asymmetrical MF and HF horns. Dual 15-in woofers are sepa-
rated at an optimal distance to provide significant off-axis
attenuation to below 200 Hz. To avoid problematic lobing in
the upper LF range, discrete signal processing reduces the
input to one LF driver while allowing the other to continue to
work up into the lower midrange. This more evenly matches
the MF horns beamwidth while assisting in maintaining pat-
tern control through the entire crossover region. The
MQH1344e requires four separate amplifier channels (quad-
amplification) and digital signal processing in order to
achieve the pattern control described.
Application Usage: Install
Houses of Worship
Auditoriums Theatres
Performing Arts Centers Arenas
Stadiums
SPECIFICATIONS MQH1344e
FEATURES
DESCRIPTION
PERFORMANCE
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
info@eaw.com
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
MQH1344e/0002684/2 pp April 2002
Printed in USA
APPLICATION
PHYSICAL
LF Subsystem
2x 15-in cones, vented
MF Subsystem
10-in horn loaded cone, Radial
Phase Plug™
HF Subsystem
1x 2-in exit/3-in diaphragm
compression driver on a constant
directivity horn
Configuration
3-way, full-range
Powering
Quad-amplified
Enclosure Material
Exterior grade Baltic birch plywood
Finish
Wear-resistant textured black paint
Connectors
Terminal barrier strip
Suspension Hardware
16x 3/8”-16 threaded mounting
points (4 each on top, bottom
and sides)
Grille
Powder coated perforated steel
Dimensions
inches
millimeters
Height (front)
54.0
1372
Height (rear)
28.0
711
Width
8.4
213
Depth
27.0
686
Trapezoid Angle
20 degrees per side
Weights
pounds
kilograms
Net Weight
225
102.3
Shipping Weight
253
115.0