EAW MS30 Specifications - page 2
MS-30 Specifications
Frequency Response
On Axis
±
1.5 dB:
70 Hz to 18k Hz
On Axis
±
10 dB:
43 Hz to 22.5k Hz
Polar Response
30* Off Axis:
- 3 dB at 19k Hz
60' Off Axis:
- 3 db at 12k Hz
- 6 dB at 16k Hz
Horizontal Dispersion Angle:
12'
±
3 dB
Sensitivity (I w at 1m):
90 dB SPL
Power Handling
Long Term Continuous Sine Wave
(100 Hours):
70 watts RMS
Continuous Program:
150 watts
Short Term Peak (10 ms):
400 watts
Maximum Sound Pressure Level
Continuous:
109 dB SPL at I m
Program:
112 dB SPL at 1m
Nominal Impedance:
8 ohms
Crossover Type:
Third Order 18 dB
per Octave
Crossover Frequency:
2,500 Hz
Bass Driver
Nominal Diameter:
210mm (8 in)
Voice Coil Diameter:
39mm (1.54 in)
Flux Density:
10,000 gauss
Effective Diaphragm Area:
230 sq. cm
HF Driver
Type:
26mm (I in)
Soft Dome
Flux Density:
18,000 gauss
Enclosure Volume:
33 liter (1.2 ft 2)
Enclosure Type:
Vented
Finish:
Black
Dimensions:
17 " x 14" x 121/4
than any other professional monitor system. To eliminate the
possibility of crossover variations all components are of the
finest available and are tested in house before and after
assembly. All capacitors are custom manufactured to our
high standards. Inductors are aircore type, hand wound in
house. Each component is matched to within 3% of the
design value. This precision effectively eliminates the
crossover as a source of distortion.
Further information on the MS-30's performance
and comparative data can be found in EAW Technote 0280
"Compact Studio Monitor Comparative Data". Further
information on the design philosophy of the MS-30 can be
found in EAW Technote 0285 "Design Parameters of A
Reference Monitor For Quality Assurance In Audio
Production Applications".