EAW SM129z Specifications - Specifications Sm129Z
SPECIFICATIONS SM129z
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
info@eaw.com
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
SM129z-0001331/2 pp
April 2002
Printed in USA
Manufacturing tolerances are +/- 0.13 and +/- 1°
5.25
(7.06)
2X 7.06
L
C
TOP
15.00
GRILLE PARTIALLY SHOWN
DIMENSIONS APPLY TO
BOTH SIDES
2X 37°
4.31
RIGHT SIDE
C
L
SEE NOTE 2
FRONT
VIEW B-B
L
C
LEFT SIDE
B
SM129z
4X RUBBER FEET
1.25
8.87
3.59
B
4.62
11.75
13.51
NOTES:
1. SYMBOL INDICATES MOUNTING POINT
5/16-18 T-NUT FOR ULTIMATE BRAND STAND.
2. FEET ADD APPROXIMATELY .4 TO HEIGHT OF
CABINET.
14.62
9.50
4.00
3.00
6.44
23.58
2X HANDLE
2X INPUT
23.58
22.50
WHITINSVILLE, MA USA
S/N
SM129z
PIN 1--...--
PIN 1+...+
PIN 2--...NC
PIN 2+...NC
The 2-way full-range loudspeaker shall incorporate a 12-in LF
woofer and a 1-in exit HF compression driver.
The LF woofer shall be mounted in a vented enclosure tuned
for optimum low frequency response. The HF compression driv-
er shall be loaded on a constant directivity horn with a nom-
inal beamwidth of 90° (h) x 45° (v). An internal passive fil-
ter network shall provide fourth order acoustical crossover and
system equalization.
System frequency response shall vary no more than ±3 dB from
80 Hz to 19 kHz measured on axis. The loudspeaker shall pro-
duce a sound pressure level (SPL) of 97 dB SPL on axis at 1
meter with a power input of 1 watt, and shall be capable of
producing a peak output of 129 dB SPL on axis at 1 meter. The
loudspeaker shall handle 450 watts of amplifier power (AES
Standard) and shall have a nominal impedance of 8 ohms.
The loudspeaker enclosure shall have rubber footpads on one
side. Its baffle shall be angled up 37°. It shall be construct-
ed of exterior grade Baltic birch plywood and shall employ
extensive internal bracing. It shall be finished in wear resist-
ant textured black paint. Input connectors shall be four
Neutrik NL4 Speakon (two per side). Two 5/16"-18 threaded
mounting points shall be provided on top of the enclosure
spaced to accept a third party external stand mount adaptor.
The front of the loudspeaker shall be covered with a powder
coated perforated steel grille backed with open cell foam to
protect against dust.
The 2-way full-range loudspeaker shall be the EAW model
SM129z.
INPUT PANEL