EAW SM159z Specifications - Specifications Sm159Z
SPECIFICATIONS SM159z
DIMENSIONAL DRAWING
INPUT PANELS
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
info@eaw.com
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
SM159z-0001332/2 pp
April 2002
Printed in USA
Manufacturing tolerances are +/- 0.13 and +/- 1°
L
C
4.00 6.44
2X 3.00
25.50
15.76
7.06
CL
B
2X INPUT
15.42
C
C
C
L
C
C
11.09
1.25
26.46
26.46
2X 7.06
3.60
NOTES:
1. SYMBOL INDICATES MOUNTING POINT
5/16-18 T-NUT FOR ULTIMATE BRAND STAND.
2. FEET ADD APPROXIMATELY .4 TO HEIGHT OF
CABINET.
4X RUBBER FEET
LEFT SIDE
RIGHT SIDE
DIMENSIONS APPLY TO BOTH
SIDES
2X HANDLE
9.50
4.62
18.00
SEE NOTE 2
SM159z
TOP
5.25
GRILLE PARTIALLY SHOWN
15.00
VIEW B-B
FRONT
B
4.31
2X 37°
WHITINSVILLE, MA USA
S/N
SM159z
PIN 1--...--
PIN 1+...+
PIN 2--...NC
PIN 2+...NC
The 2-way full-range loudspeaker shall incorporate a 15-in LF
woofer and a 1-in exit HF compression driver.
The LF woofer shall be mounted in a vented enclosure tuned
for optimum low frequency response. The HF compression driv-
er shall be loaded on a constant directivity horn with a nom-
inal beamwidth of 90° (h) x 45°(v). An internal passive filter
network shall provide fourth order acoustical crossover and
system equalization.
System frequency response shall vary no more than ±3 dB from
70 Hz to 19 kHz measured on axis. The loudspeaker shall pro-
duce a sound pressure level (SPL) of 97 dB SPL on axis at 1
meter with a power input of 1 watt, and shall be capable of
producing a peak output of 130 dB SPL on axis at 1 meter. The
loudspeaker shall handle 500 watts of amplifier power (AES
Standard) and shall have a nominal impedance of 8 ohms.
The loudspeaker enclosure shall have rubber footpads on one
side. Its baffle shall be angled up 37°. It shall be construct-
ed of exterior grade Baltic birch plywood and shall employ
extensive internal bracing. It shall be finished in wear resist-
ant textured black paint. Input connectors shall be four
Neutrik NL4 Speakon (two per side). Two 5/16"-18 threaded
mounting points shall be provided on top of the enclosure
spaced to accept a third party external stand mount adaptor.
The front of the loudspeaker shall be covered with a powder
coated perforated steel grille backed with open cell foam to
protect against dust.
The 2-way full-range loudspeaker shall be the EAW model
SM159z.