EAW SMS4124 Instruction Manual - Tethering The Loudspeaker:
14
– SMS4124 / SMS4940/ SMS4990
Mounting the loudspeaker onto a clip-fi t bracket:
a. Once the clip-fi t bracket has been wired and secured to the wall, press the
loudspeaker onto the input connector, until it clicks in place.
Make sure it is fi tted on correctly and clicks in place securely.
Tethering the loudspeaker:
An M5 threaded hole in the bottom rear of the loudspeaker is provided for tethering the
loudspeaker. This will reduce the chance of it from falling during structural events such as
earthquakes or fi res. Professional installers will be able to advise the best tethering system
for your installation.
Adjusting the loudspeaker angle:
The adjustment and locking mechanism has
been designed to be easy to use.
a. Rotate the locking wheel until the
loudspeaker can be rotated horizontally
and vertically. Find the desired loudspeaker
position, and then rotate the locking wheel
until it locks this position. Slots are provided
in the locking wheel to allow further
tightening with a fl athead screwdriver if
required.
b. Perform a listening test to verify that the
coverage is acceptable.
Close-up of Lock/unlock wheel
Lock/unlock wheel
Unlock
Threaded tether hole
Lock