EazzyDV BC-680 User Manual - page 7
__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 7 / 13 www.eazzydv.com
3. How to install/operate
1. Insert a Micro SD card (2GB-32GB, format it for first time usage) into the camera card-slot
1.1. Before screw-in the camera, ensure the socket power is off and the voltage is
within the operation range (AC 110 – 250V)
2. Screw-in the camera like a bulb
3. Turn on power
4 .First you would see
Blue
and
Red
indication lights are on, after few seconds only
Blue
indication
light is flashing that means it is recording. But if only
Red
indication light is on, that means the
Micro SD card has some problem, take it out and reformat it and insert it again.
3.1 Soft Stop Recording
1. If it is recording, press the “S” button once.
2. The
Blue
and
Red
indication lights will be on. That means it is in standby mode,
Wait for 3-5 seconds, push the card, it will eject out. When the card is out, only
Red
indication
light is on.
3. If the card is not taken out, to continue recording, just press the “S” button once again, the
Blue