Night raider remote control helicopter user guide xc9893 © 2012 eb brands.
Congratulations on your new exrc purchase! Exrc pilots experience superior ight and excellence in the look and feel of our products while commanding the skies. Now that you are a honorary exrc pilot, we recommend reading through this manual thoroughly before attempting ight tips, safety precautions,...
Activating glow in the dark feature energize the night raider’s glow in the dark body by using a bright light source (e.G. Next to the window on a sunny day or under a table lamp) for 10 minutes. Please be sure that the helicopter is turned off. Caution: do not leave the night raider unattended unde...
4 flying your helicopter getting started band selection 1. Select the frequency band on the controller. (a, b or c) 2. Move the chopper’s switch to the on position. The helicopter will light up, indicating it is on. 3. Carefully hold the chopper in one hand, be sure the blades are clear of any obsta...
5 trimming helicopter/direction control virtually no trimming is required for the night raider. However, if the helicopter ight, use the rudder trim knob on the top right side to adjust. 1. When the helicopter is spinning clockwise, turn the rudder trim knob counterclockwise to adjust. (see diagram ...
6 safety tips • read through the entire instruction manual, before attempting to pilot your helicopter. • this product is intended for indoor use, and works best indoors. We do not recommend using the product outdoors. Y your helicopter in a cluttered space. This helicopter was intended for obstacle...
Troubleshooting (continued) problem cause correction care & handling • do not submerge in water or other liquids. • do not disassemble the product for any reason. • do not expose to extreme temperatures. • do not drop, throw, smash or otherwise cause physical shock. • clean using only a slightly dam...
Fcc part 15 compliance cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the product. Note: this product has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limit...
