1. DL manuals
  2. Ebac
  3. Dehumidifier
  4. Powerpac
  5. Manual

Ebac Powerpac Manual

Other manuals for Powerpac: Manual

Summary of Powerpac

  • Page 1

    Where you see this symbol on any of our electrical products or packaging, it indicates that the relevant electrical products should not be disposed of as general household waste in europe. To ensure the correct waste treatment of the product, please dispose of it in accordance with any applicable lo...

  • Page 2

    There’s a lot more to your ebac dehumidifier than preventing damp and condensation damage. It could actually improve your health. Damp conditions provide the ideal breeding ground for dust mites. So, if you suffer from an allergy or asthma aggravated by dust mites,lower humidity levels may help. Als...

  • Page 3

    4 5 setting the controls 1 5 3 4 6 2 7 8 1. Ensure it is always connected to the mains 2. Allow at least 40mm/ 1.5” clearance between the back of the unit and the wall. 3. Ensure internal doors are kept ajar where possible to aid moisture transfer. 4. Ensure external doors and windows are kept close...

  • Page 4

    The powerpac has a filter to remove dust from the air and also protect the unit. This requires cleaning and we recommend that the filter be inspected and cleaned every 4 weeks. Failure to do so will reduce the efficiency of your powerpac. Remove the filter by lifting the filter door release catch th...

  • Page 5

    8 9 the unit has an internal reservoir which contains up to 100ml of water. If the unit is to be moved between rooms take care to carry the unit level or empty the water by removing the water filter (see page 7). • never use solvents or abrasive cleaners to clean your powerpac. When your room temper...

  • Page 6

    • appliance is suitable for indoor use only (excluding laundry rooms) • do not use the unit if the power cord is damaged • if the flexible power cord is damaged it must be replaced by an identical cord which is available from ebac ltd or an ebac authorised distributor. • do not poke objects into any...