EBENCH KH 2055 Operating Instructions Manual - page 25
| Operating Instructions
GB
Operating Instructions|
GB
. Troubleshooting
• If you receive the error report “Communication not pos-
sible”, this may be due to the following:
The download cable may not be connected to the
specified serial interface.
Select the right interface in the download programme
dialogue window:
If you have selected interface number 1 (COM PORT 1)
under the item “Serial Interface” in the dialogue window, now
switch to interface 2 (COM PORT 2).
If you had previously selected interface 2 (COM PORT 2), now
switch to interface 1 (COM PORT 1).
Now click again on the button “Download”.
It is possible that the download cable is not correctly con-
nected to the Hi-Fi Door Bell or to your computer:
Check that the download cable is connected correctly to
your computer and the Hi-Fi Door Bell and that the connec-
tion is strong.
Restart the download by clicking on the button “Down-
load”.
• If downloading is still not possible …
Check whether the selected file may be damaged; you can do
this by attempting to play the file, e.g. using Windows Media
Player® or a comparable programme.
If you cannot play the file on Windows Media Player® or a com-
parable programme, it is probably damaged.
Note:
In most cases, damaged files cannot be loaded on the Hi-Fi
Door Bell or are not played or played incorrectly once they
have been downloaded.
• If the download programme does not run properly
or if there problems during the use of the download pro-
gramme ...
Place the CD ROM enclosed with the Hi-Fi Door Bell and
entitled “Software Installation” in to the CD ROM drive of
your computer. The start window opens automatically after
a few seconds. Now proceed with step 4.
If the start window does not open automatically, the automatic
function on your computer is deactivated. In this case ...