EBENCH KH 75 Operating Instructions Manual - page 7
RADIO RECEPTION
Switch on the radio by moving the function switch
into the ON position.
Set the band selector switch to the required position (VHF or MW)
. Set the volume using the volume control
.
Set the radio to the VHF or medium wave frequency of your choice using the tuner
.
AERIALS
FM (VHF): Unwind and position the wire aerial for best reception of VHF
AM /MW: The radio has a sensitive ferrite aerial.
SETTING THE TIME
Press and hold down the TIME button
(TIME / TIME-SET) whilst pressing the HOURS
or MINUTES
button until you see the
correct time in the display.
SETTING THE ALARM TIME
Press the ALARM
and HOURS
or MINUTES
button until the required alarm time appears in the display.
SETTING THE ALARM MODE
1
First set the required alarm time as explained above.
2
If you wish to be woken by the buzzer turn the VOLUME CONTROL
until you hear it click. The activated alarm mode is then
shown in the display.
3
If you wish to be woken by the radio, set the FUNCTION SWITCH
to ON and select the desired station/frequency and the
volume
.
4
Then set the FUNCTION SWITCH
to AUTO. The activated alarm mode is then shown in the display.
6