Eberspächer EasyStart Call Operating Instructions Manual - page 19
Vehicle heaters – Technical Documentation | 19
2 OpeRATiOn
nOTes On TiMeR pROgRAMMing
When programming a timer, you must note the
operating modes of the easystart Call and, if
applicable, the day range.
Departure time mode (factory setting):
in departure time mode (end), if the timer is
activated, the heater is switched off when the
set time is reached.
start time mode:
in start time mode (start), if the timer is acti
vated, the heater is switched on when the set
time is reached.
Day of the week entry
Days of the week can be programmed indi
vidually or as a day range. you can select from
the following day ranges: MOFR / sAsu /
MOsu
if a timer is activated with a programmed day
range, all days of the week are always pro
cessed in succession.
example:
if, during the programmed day range MO FR,
the timer is activated on Wednesday outside
the programmed time, the heater heats or
ventilates on Thursday and Friday with the
specified settings.
The heater is not operated on saturday and
sunday. From Monday of the following week,
operation continues with the set specifications
for the programmed day range.
nOTes On TiMeR ACTiVATiOn
if the timer is activated, the heater is switched
on under the following conditions:
in departure time mode (factory setting):
Current day and preselection day are
identical
Current time is within the time span
(time span = departure time minus
duration)
When the departure time is reached, the
heater is switched off.
example:
Current day / preselection day: Th
Current time: 6.45 pM
Departure time: 7.00 pM
Duration: 30 Minutes
Time span: 6.30 pM to 7.00 pM
The current time is within the time span; the
heater is switched on and heats for 15 min.
(6.45 pM to 7.00 pM).
in start time mode:
Current day and preselection day are
identical
Current time is within the time span
(time span = start time plus 5 minutes)
example:
Current day / preselection day: MO
Current time: 3.03 pM
start time: 3.00 pM
Duration: e.g., 30 minutes
Time span: 3.00 pM to 3.05 pM
The current time is within the time span;
the heater is switched on; duration, e.g., 30
minutes.