- DL manuals
- Eberspächer
- Timer
- EasyStart T
- Operating Instructions Manual
Eberspächer EasyStart T Operating Instructions Manual
Summary of EasyStart T
Page 1
Easystart t operating instructions. Comfort timer with 7-day preset capability..
Page 2
2 contents introduction • please read first ..................................................................................................... 3 • safety information .................................................................................................. 3 • general information ...........
Page 3: Safety Information
3 safety information danger! – all information and notes, in particular the safety information in the heater’s technical description must be observed at all times! – the heater must be switched off when refuelling. – only use original spare parts. Important information please read fi rst please ensu...
Page 4: Timer
4 timer the timer can be used to make the settings and adjustments necessary for operation of the heater and to switch various units on and off. Control key – back select a function in the menu bar and adjust values activation key • timer – on / off • switch over in the display bar between – tempera...
Page 5: Displays
5 overview displays menu bar heater on / off ventilation on / off add-on unit on / off program preset time set the time / operating time set heating level program bar preset memory 1 preset memory 2 preset memory 3 mo – so weekdays mo – su english weekdays • if the program number is underlined, e.G....
Page 6
6 flashing symbols each flashing symbol in the menu, program and display bar can be changed with or and confirmed with . Operation and adjustment basic operation and adjustment rules activate timer if the display is not lit, the timer must be activated before each use. The timer must be activated be...
Page 7: Activate Timer
7 activate timer display press until the menu bar appears in the display and the temperature is displayed. The timer is activated. • possible displays such as and are described in the chapter “what to do if …?” from page 22. • if the heater or additional unit is in use or the vehicle lighting is swi...
Page 8
8 operation and adjustment set weekday, time and operating time activate timer with (see page 7). Select symbol with or . Confirm selection with . Select weekday with or . Confirm selection with . Set hours with or . Confirm setting with . Set minutes with or . Confirm setting with . Permanently set...
Page 9: Switch On Heater
9 the following actions are possible: • call up display. Press, the current heating level is displayed (for air heaters only) press to display the time. Press to display the operating time. See above for adjustment. Operation and adjustment activate timer with (see page 7). Select symbol with or . C...
Page 10: Switch Off Heater
10 the following actions are possible: • switch from temperature display to time and back, press . • select functions in the menu bar with or , confirm selection with . The further procedure is described in the relevant section for the selected function. Operation and adjustment switch off heater di...
Page 11: Switch On Ventilation
11 activate timer with (see page 7). Select symbol with or . Confirm selection with . Ventilation is switched on. The following actions are possible for the operating time: • the operating time can be accepted with . • the operating time can be changed as a one-off with or and then confirmed with . ...
Page 12: Switch Off Ventilation
12 select symbol with or . Confirm selection with . Ventilation is switched off. Operation and adjustment switch off ventilation – only possible if symbol is displayed in the menu bar (for general information, see page 13). Display the following actions are possible: • switch from temperature displa...
Page 13
13 operation and adjustment after the heater has been switched off in “ventilate” mode, you can immediately switch to “heat” mode using the “heat / ventilate” switch or the “mini controller”. Then use the timer to switch the heater back on. Switch of “ventilate” or “heat” mode use the timer to switc...
Page 14: Switch On Add-On Unit
14 activate timer with (see page 7). Select symbol with or . Confirm selection with . Add-on unit is switched on. The following actions are possible for the operating time: • the operating time can be accepted with . • the operating time can be changed as a one-off with or and then confirmed with . ...
Page 15: Switch Off Add-On Unit
15 operation and adjustment select symbol with or . Confirm selection with . Add-on unit is switched off. Switch off add-on unit – only possible if symbol is displayed in the menu bar. Display general information on the add-on unit an add-on unit can be e.G. A second heater or parking air conditioni...
Page 16
16 operation and adjustment the timer can be used to program 3 preset times. The 3 preset times can either all be spread over one weekday or be spread between different weekdays. In water heaters and if a temperature sensor is connected to the timer the heater start is automatically calcula- ted dep...
Page 17: Program Preset Times
17 operation and adjustment select the required function , or with or and confirm with . Select weekday mo – su with or and confirm with . Activate timer with (see page 7). Select symbol with or . Confirm selection with . Select preset memory 1, 2 or 3 with or and confirm with . Program preset times...
Page 18: Program Preset Times
18 operation and adjustment program preset times display the assigned preset memory locations appear in the display. The next preset me- mory to be activated is underlined in the display and the corresponding weekday is also displayed. The same procedure is required to pro- gram preset times in the ...
Page 19: Delete Preset Times
19 operation and adjustment the steps for deleting preset times are the same as for adjusting / setting the preset time, until the current function flashes in the status bar. Or press until appears in the display. Confirm with . The preset time is deleted. Delete preset times display the following a...
Page 20: Set Heating Level
20 in water heaters you can choose between the eco heating level (normal heating) and high (comfort heating). The selected heating level is required to calculate the “heat” operating time depending on the measured ambient temperature. The heating levels eco and high are only effecti- ve in conjuncti...
Page 21: Set Heating Level
21 operation and adjustment anzeige im display air heaters can be individually set to a heating level of 8 to 36 in immediate and preset mode. Heating levels 8 to 36 only approximately correspond to a temperature reading and therefore may differ from the actual temperature in the vehicle. Please not...
Page 22: Displays
22 what to do if …? Description remedy a fault occurs in the heater during opera- tion (e.G. Fuel shortage or interruption in the diagnostics cable). See heater’s installation instructions for troubleshooting advice. Description the ”set timer“ display appears after the timer is activated. Possible ...
Page 23: Anzeigen
23 what to do if …? If you are unable to remedy the fault or error, please contact an authorised je workshop or dial the service phone number given on page 24. Please note! Possible cause adr mode is active. It is not permitted to program preset times in this mode ( is not available in the menu bar)...
Page 24: Hotline
24 service hotline if you have any technical question, a problem with your timer or the heater, dial the following service phone number: telephone hotline phone 0800 / 12 34 300 fax hotline fax 01805 / 26 26 24 outside of germany, please contact the respective national eberspächer service agent..
Page 28: Www.Eberspaecher.Com
22 1000 32 88 06 07.2006 w e r eserve the right to make changes printed in germany © j. Eberspächer gmbh & co. Kg j. Eberspächer gmbh & co. Kg eberspächerstraße 24 d-73730 esslingen telefon 0711 939-00 telefax 0711 939-0643 info@eberspaecher.Com www.Eberspaecher.Com.