Eberspächer EasyStart Timer Operating Instructions Manual - 17:30
VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn | 9
3 OpeRATiOn AnD seTTing/ADjusTMenT
start display aftEr switchiNg ON
17:30
21 °C
if no menu item is activated, the start display
appears with a flashing heater symbol in the Menu
bar, with the current time and the actual temperature
in the status area.
Other possible actions are:
heATing iMMeDiATeLy with LOngpRess.
heATing On with shORTpRess, in addition con-
firm and if applicable set the temperature setpoint
and operating time,
see page 11
.
select a new menu item.
displays fOr actiVatEd mENu itEms
heATing On
60 min
21 °C
Other possible actions are:
heATing OFF,
see page 10
and
12
.
select a new menu item.
VenTiLATiOn On
60 min
21 °C
Other possible actions are:
VenTiLATiOn OFF,
see page 15
.
select a new menu item.
ADD-On heATeR heATing On
90 min
Other possible actions are:
ADD-On uniT heATing OFF,
see page 19
.
select a new menu item.
ADD-On heATeR VenTiLATiOn On
90 min
Other possible actions are:
ADD-On uniT VenTiLATiOn OFF,
see page 19
.
select a new menu item.