EBN Technology XPOS72-8B-A16G Service Manual - page 8
of
13
Chapter 4
5
4.
4.
Touch Panel Control Board Disassembly
1. Remove: 1. Speaker connector, 2. LED indicator connector, 3. LCD connector, 4.
inverter connector, 5. power switch connector, 6. touch panel connector from the
mainboard.
2. Disconnect twoconnecters form the LCD inverter as shown below.
3. Loosen the two screws by #0 Phillips screwdriver and remove the LCD
inverter.
4. Install the new LCD inverter in the reverse procedure.