1. DL manuals
  2. Ebode
  3. IP Camera
  4. IPV38P2P
  5. User Manual

Ebode IPV38P2P User Manual

Manual is about: Wi-Fi HD720P Pan & Tilt Indoor P2P IP Camera

Summary of IPV38P2P

  • Page 1

    Www.Ebodeelectronics.Eu user manual ipv38p2p wi-fi hd720p pan & tilt indoor p2p ip camera before using this product, please read this document carefully and visit www.Ebodeelectronics.Eu for latest manual, software and faq..

  • Page 2

    31-7-2014 2 ebode ipv38p2p contents of the kit: 1x ip camera 1x power adapter 1x resource cd 1x ethernet cable 1x mounting bracket + screws 1x wi-fi antenna 1x quick start guide 1x surveillance sticker 1x ebode leaflet technical specification: 720p hd pan/tilt wired/wireless ip camera p2p feature fo...

  • Page 3

    31-7-2014 3 ebode ipv38p2p user guide table of contents 1. Conformity of use…………………………………………………………………………………… 4 2. Introduction…………………………………………………………………………………………… 4 3. Overview………………………………………………………………………………………………… 5 3.1 key features…………………………………………………………………………………………… 5 3.2 read before use………………………………...

  • Page 4

    31-7-2014 4 ebode ipv38p2p 1. Conformity of use for carefree and safe use of this product, please read this manual and safety information carefully and follow the instructions. The unit is registered as a device that does not cause or suffer from radio-frequency interference. It is ce approved and i...

  • Page 5

    31-7-2014 5 ebode ipv38p2p 3. Overview indoor hd wireless ip camera with p2p is an integrated wireless ip camera with a colour cmos sensor enabling viewing in high definition resolution. It combines a high quality digital video camera, with a powerful web server, to bring clear video to your desktop...

  • Page 6

    31-7-2014 6 ebode ipv38p2p the instructions in the quick installation guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly as intended. 3.3 physical description front panel figure 3.1 1. Speaker: built-in speaker. 2. Lens: fixed focus lens. 3....

  • Page 7

    31-7-2014 7 ebode ipv38p2p 1. Lan: 10/100 mbps rj-45 port for wired connection. 2. Power: dc 5v/2a power supply. 3. Network light: the led will blink slowly in wired connection, blink two times faster in wireless connection, blink four times faster when wps. 4. Power light: if the power supply works...

  • Page 8

    31-7-2014 8 ebode ipv38p2p figure 4.1 double click the ip address of the camera; your default browser will open to the camera login page. (2) https:// lan ip + https port no. The default https port no is 443. You can use the url to access the camera: https:// lan ip + https port. Go to settings - ne...

  • Page 9

    31-7-2014 9 ebode ipv38p2p figure 4.3 access your ip camera from the internet you can access the ip camera from the internet (remote access). Enter the wan ip address and port number in your standard browser. For example, you would enter http:// 183.37.28.254:85 notes: make sure port forwarding is s...

  • Page 10

    31-7-2014 10 ebode ipv38p2p conflict with other existing ports like 25, 21,10000.Here you can set the port no. Between 1 and 65535. Change the default http no.88 to another one. How to assign a different http port no. And fixed the lan ip of the camera by the ip camera tool？ step 1: open the ip came...

  • Page 11

    31-7-2014 11 ebode ipv38p2p step 2: enter the username and password of the administrator (default username is admin with a blank password), and click “ok” to apply changes. Step 3: wait around 10 seconds, you’ll see that the camera’s lan ip address has changed. In our example it was changed to 2000,...

  • Page 12

    31-7-2014 12 ebode ipv38p2p figure 4.7 first method: use the embedded ddns to access the camera via the internet each camera has an embedded unique ddns domain name, the format of this domain name is xxxxxx.Myipcamera.Org. On the bottom of the camera, you can see the domain name sticker with this in...

  • Page 13

    31-7-2014 13 ebode ipv38p2p second method : use the third party ddns to access the camera via the internet step 1:please go to the third party ddns website(such as www.No-ip.Com ) to create a free hostname. Step 2:do ddns service settings within the camera please set ddns settings within the camera ...

  • Page 14

    31-7-2014 14 ebode ipv38p2p figure 4.9 figure 4.10

  • Page 15

    31-7-2014 15 ebode ipv38p2p sometimes you may need to enter the user name and password again. Click ok and you can see the real-time preview. Figure 4.11 figure 4.12 if you cannot play the video in the vlc player, please check the port mapping. You can read quick installation guide about how to conf...

  • Page 16

    31-7-2014 16 ebode ipv38p2p 5. Surveillance software gui please refer to the quick installation guide if you install the camera at first time. After finishing quick installation, you take time to learn the operation of the software. 5.1 login window this camera supports http and https figure 5.1 ple...

  • Page 17

    31-7-2014 17 ebode ipv38p2p 4. Login the camera click login button and you will see the surveillance windows.(if login the camera for the first time, the page that modify the username and password will appears.) 5.2 modify the username and password when you log in for the first time, it will come to...

  • Page 18

    31-7-2014 18 ebode ipv38p2p figure 5.4 system time: select the time zone you need to set the date, time, format, etc. Figure 5.5 wireless networks:click scan, find the ssid of your wireless router, select and enter the password. Figure 5.6.

  • Page 19

    31-7-2014 19 ebode ipv38p2p ip: set the ip address of the camera. You could choose to obtain an ip automatically (dhcp) or set the ip address manually according to your needs. Figure 5.7 note: it takes about 1 minute to connect the camera to your router. 5.4 surveillance window figure 5.8 9 2 3 5 8 ...

  • Page 20

    31-7-2014 20 ebode ipv38p2p 1. Livevideo / settings/playback buttons path to surveillance window. Click this button and back to the surveillance window path to administrator control panel, click it, and it will lead to administrator control panel and do advanced settings. Click this button and back ...

  • Page 21

    31-7-2014 21 ebode ipv38p2p 1) stream type number: the number is used to identify the stream type. 2) 720p/ vga there are two resolutions, the bigger one is 720p, and the smaller one (vga) is 640x480 pixels. The bigger the resolution, the better of the image quality is. If you are accessing the came...

  • Page 22

    31-7-2014 22 ebode ipv38p2p figure 5.11 4. Pan/tilt control 1) up control button. 2) down control button. 3) left control button. 4) right control button. 5) up-left control button. 6) up-right control button. 7) down-left control button. 8) down-right control button. Click this button and go to cen...

  • Page 23

    31-7-2014 23 ebode ipv38p2p the default cruise tracks have two types: vertical (the camera will rotate from up to down) and horizontal (the camera will rotate from left to right). Start cruise. Stop cruise. If you want to define or change the cruise trace, please go to settings  ptz  preset settin...

  • Page 24

    31-7-2014 24 ebode ipv38p2p after that, you can move the camera and stop at another place, and set another preset position. You can do all the 16 preset positions with this method. If you want to see one preset position you have set, only select the preset position name from the preset drop- down li...

  • Page 25

    31-7-2014 25 ebode ipv38p2p 9. Play/stop/ talk/audio/ snap/ record/ full screen button 1) play: click it to play the video of the camera 2) stop: click it to stop the video of the camera 3) talk: click the button and the icon will become to , then talk to the microphone that connected with pc, peopl...

  • Page 26

    31-7-2014 26 ebode ipv38p2p keep ration: select it and the camera will adjust the size of live window based on the the computer monitor automatically. Sometimes there is a black border around the video, please select keep ration to get a better visual quality . Full screen: select it and click it to...

  • Page 27

    31-7-2014 27 ebode ipv38p2p click the screen ptz button and put the mouse on the screen to indicate the camera move direction you prefer, press the left mouse, the camera will move to the corresponding direction. Loosen the mouse and stop moving. Press esc button or double click right mouse and canc...

  • Page 28

    31-7-2014 28 ebode ipv38p2p figure 6.2 6.1.3 session status session status will display who and which ip is visiting the camera now. Figure 6.3 6.1.4 log the log record shows who and which ip address accessed or logout the camera and when. Figure 6.4 click the page number and go to the corresponding...

  • Page 29

    31-7-2014 29 ebode ipv38p2p reboot the camera and clear the log records. 6.2 basic settings this section allows you to configure your camera’s name, time, mail, user account and multi-device. 6.2.1 camera name default alias is anonymous. You can define a name for your camera here such as apple. Clic...

  • Page 30

    31-7-2014 30 ebode ipv38p2p 6.2.3 user accounts here you can create users and set privilege, visitor, operator or administrator. The default user account is admin, with a blank password. You can enter the users accounts of visitor, operator and administrator manually. Figure 6.7 how to change the pa...

  • Page 31

    31-7-2014 31 ebode ipv38p2p figure 6.9 figure 6.10 delete: select the account you want to delete, then click delete button to take effect. Note: the default admin account cannot be deleted, but you can add other administrator users..

  • Page 32

    31-7-2014 32 ebode ipv38p2p 6.2.4 multi-camera if you want to view multi-surveillance screens on one window, you need to login one camera, and set it as the main device, and do multi-device settings, add other cameras to the first one camera. Before you do multi-cams settings, you need to assign dif...

  • Page 33

    31-7-2014 33 ebode ipv38p2p figure 6.12 back to surveillance windows, and click four windows option, you will see four cameras you added. Figure 6.13.

  • Page 34

    31-7-2014 34 ebode ipv38p2p figure 6.14 add cameras in wan if you want to view all cameras via the internet(remote computer), you will need to add them using ddns domain name. Firstly, make sure all of the cameras you added can be accessed through the internet. (read how to configure ddns settings i...

  • Page 35

    31-7-2014 35 ebode ipv38p2p click multi-device settings. Choose the 2nd device. Fill in the 2nd camera’s name, ddns domain name, port number. Enter user name and password and then choose add. (figure 6.19) figure 6.16 1) the camera model: mj or h264. 2) the 2nd camera’s name 3) fill in the 2nd camer...

  • Page 36

    31-7-2014 36 ebode ipv38p2p figure 6.17 return to video window. You will see all of the cameras accessible through the internet. When you are away from home, you can use the first camera’s ddns domain name and port to view all the cameras via internet. Figure 6.18.

  • Page 37

    31-7-2014 37 ebode ipv38p2p 6.3 network this section will allow you to configure your camera’s ip, pppoe, ddns, wireless settings, upnp and port. 6.3.1 ip configuration if you want to set a static ip for the camera, please go toip configuration page. Keep the camera in the same subnet of your router...

  • Page 38

    31-7-2014 38 ebode ipv38p2p figure 6.21 if you don’t know the dns server, you can use the same settings as the default gateway. 6.3.2 wireless settings step 1:choose “settings” on the top of the camera interface, and go to the “network” panel on the left side of the screen, then click “wireless sett...

  • Page 39

    31-7-2014 39 ebode ipv38p2p step 2:click the ssid (name of your router) in the list, the corresponding information related to your network, such as the name and the encryption, will be filled into the relevant fields automatically. You will only need to fill in the password of your network. Make sur...

  • Page 40

    31-7-2014 40 ebode ipv38p2p 6.3.3 pppoe if you are using a pppoe connection, enable it and enter the user name and password for your pppoe account. Figure 6.24 6.3.4 ddns each camera has embedded a unique ddns domain name when producing, and you can directly use the domain name, you can also use the...

  • Page 41

    31-7-2014 41 ebode ipv38p2p third party domain name settings user can also use third part ddns, such as www.No-ip.Com, www. 3322.Com . Here take www.No-ip.Com for example: ① step 1, go to the website www.No-ip.Com to create a free hostname firstly: login on www.No-ip.Com and click no-ip free to regi...

  • Page 42

    31-7-2014 42 ebode ipv38p2p please register an account step by step according to instructions on www.No-ip.Com after registration, please login your email which used to register. You will receive an email from website, please click the link to activate your account as indicated in email. Secondly: l...

  • Page 43

    31-7-2014 43 ebode ipv38p2p step 2, do ddns service settings within the camera please setddns settings within the camera by hostname, a user name and password you’ve got from www.No-ip.Com. Take hostname ycxgwp.No-ip.Info, user name ipcamera, password ipcamera2012 for example. Firstly, goes to optio...

  • Page 44

    31-7-2014 44 ebode ipv38p2p ③ use domain name to access the camera via internet after the port forwarding is finished, you can use the domain name+ http no.To access the camera via internet. Take hostname ycxgwp.No-ip.Info and http no 2000for example, the accessing link of the camera via internet wo...

  • Page 45

    31-7-2014 45 ebode ipv38p2p another way to change the http port no. Step 1:open the ip camera tool, select the camera you would like to change the port of, right click on the ip address, and click on ”network configuration”, this brings up the network configuration box as shown in figure 6.35 and 6....

  • Page 46

    31-7-2014 46 ebode ipv38p2p step 2:enter the username and password of the administrator (default username is admin with a blank password), and click “ok” to apply changes. Step 3: wait around 10 seconds, you’ll see that the camera’s lan ip address has changed. In our example it was changed to 2000, ...

  • Page 47

    31-7-2014 47 ebode ipv38p2p figure 6.37 figure 6.38.

  • Page 48

    31-7-2014 48 ebode ipv38p2p sometimes you may need to enter the user name and password again. Click ok and you can see the real-time preview. Figure 6.39 figure 6.40 if you cannot play the video in the vlc player, please check the port mapping. You can read quick installation guide about how to conf...

  • Page 49

    31-7-2014 49 ebode ipv38p2p 6.2.7 mail settings if you want the camera to send emails when motion has been detected, here mail will need to be configured. Figure 6.41 1) smtp server/ port /transport layer security: enter smtp server for sender. Smtp port is usually set as 25. Some smtp servers have ...

  • Page 50: Test Result

    31-7-2014 50 ebode ipv38p2p figure 6.42 if the test success, you can see the success behind the test, at the same time the receivers will receive a test mail. If the test fails with one of the following errors after clicking test, verify that the information you entered is correct and again select t...

  • Page 51

    31-7-2014 51 ebode ipv38p2p figure 6.43 figure 6.44 ftp server: if your ftp server is located on the lan. If you have an ftp server which you can access on the internet. Port: default is port 21. If changed, external ftp client program must change the server connection port accordingly. Ftp mode:her...

  • Page 52

    31-7-2014 52 ebode ipv38p2p 6.3.9 p2p access the ip camera by smart phone (android or ios operating system). First of all, you need to open the p2p function of the ip camera at “settings  network  p2p”. Figure 6.45 search and install the application named “ebode” on google play for android devices...

  • Page 53

    31-7-2014 53 ebode ipv38p2p resolution: the camera supports multiple types, for example: 960p, 720p, vga, qvga. The higher the resolution is, the clearer video will become. But the code flux will become larger too, and it will take up more bandwidth. Bit rate: generally speaking, the larger the bit ...

  • Page 54

    31-7-2014 54 ebode ipv38p2p figure 6.49 click ok button and return to the page, click save to take effect. Back to the surveillance window, you can see the mask area as the following picture: figure 6.50 the mask area.

  • Page 55

    31-7-2014 55 ebode ipv38p2p 6.4.4 snapshot settings on this page you can set the snapshot pictures’ image quality and the storage path. Figure 6.51 manual snap quality:low, middle and high. The higher the quality, the picture will be clearer. Alarm pictures save to:ftp or sd card. If you have done f...

  • Page 56

    31-7-2014 56 ebode ipv38p2p figure 6.52 6.5 alarm ip camera supports motion detection alarm, when the motion has been detected, it will send emails or upload images to ftp. Figure 6.53 to enable motion detection, follow the steps below: 1) enable motion detection 2) sensitivity: it supports five mod...

  • Page 57

    31-7-2014 57 ebode ipv38p2p when the motion has been detected, the alarm status will turn to detect alarm. Figure 6.54 there are four alarm indicators: a camera sound and pc sound if the camera has connected with a speaker or other audio output device, if you select camera sound or pc sound, when th...

  • Page 58

    31-7-2014 58 ebode ipv38p2p figure 6.55 step 6) alarm schedule ① alarm anytime when motion is detected click the black button up the mon, you will see all time range turn red. When something moving in the detection area at any time, the camera will alarm. Figure 6.56 ② specify an alarm schedule clic...

  • Page 59

    31-7-2014 59 ebode ipv38p2p figure 6.57 ③ press the left mouse and drag it on the time boxes, you can select the serial area. Figure 6.58 step 7) click save button to take effect. When the motion has been detected during the detection time in the detection area, the camera will alarm and adopt the c...

  • Page 60

    31-7-2014 60 ebode ipv38p2p recording location: sd card or ftp. When the camera alarmed, it will store the alarm files to the sd card or ftp. Make sure the camera has been inserted the sd card. On this page, you can see the available space of the sd card. Local recording location:for windows os, the...

  • Page 61

    31-7-2014 61 ebode ipv38p2p figure 6.62 when the parameter recording location is set ftp on the storage location page, you can configure parameters as shown in follow figure. Figure 6.63 click savebutton to take effect. 6.6.5 sd card management this camera supports sd card and the max size of sd car...

  • Page 62

    31-7-2014 62 ebode ipv38p2p when you plug in the sd card during the camera work process, please reboot the camera again, or else the sd card may be cannot work well. Go to the settings  device status  device statuspage, you can see the sd card status. Figure 6.64 the default storage path of alarm ...

  • Page 63

    31-7-2014 63 ebode ipv38p2p 6.7.2 cruise settings this section explains how to add/ delete one cruise track. Figure 6.66 setting the cruise mode there are two cruise mode: cruise time and cruise loops. Cruise time: select cruise time from cruise mode drop-down, then you can set the cruise time of th...

  • Page 64

    31-7-2014 64 ebode ipv38p2p manage the cruise track there are two default cruise tracks: vertical and horizontal. Vertical: the camera will rotate from up to down. Horizontal:the camera will rotate form left to right. Add: add one cruise track, then click save button. Delete: select one cruise track...

  • Page 65

    31-7-2014 65 ebode ipv38p2p figure 6.69 after add the cruise track, back to the surveillance window, click cruise, here you can see all cruise tracks you have added. The cruise tracks have added to the “track 1” . Add the preset..

  • Page 66

    31-7-2014 66 ebode ipv38p2p figure 6.70 there are other buttons between the preset points and cruise track, you can use these buttons to adjust the order of preset points or add/delete one preset points in one cruise track, figure 6.71 add:select one preset points and add it to the selected cruise t...

  • Page 67

    31-7-2014 67 ebode ipv38p2p disable start-up:when rebooting, the camera will not pan / tilt. Go to home position: when rebooting, the camera will pa providing central management software to manage or monitor multi-cameras n / tilt and stops at center. Go to preset position:select one preset position...

  • Page 68

    31-7-2014 68 ebode ipv38p2p 6.9 system in this panel, you can backup/restore your camera settings, upgrade the firmware to the latest version, restore the camera to default settings and reboot the device. 6.9.1 back-up & restore click backup to save all the parameters you have set. These parameters ...

  • Page 69

    31-7-2014 69 ebode ipv38p2p figure 6.76 figure 6.77 caution: if your camera works well with the current firmware, we recommend not upgrading. Please don’t upgrade the firmware unnecessarily. Your camera may be damaged if misconfigured during an upgrade. Note: 1) before upgrade the firmware, please u...

  • Page 70

    31-7-2014 70 ebode ipv38p2p 6.9.3 factory reset click all reset and all parameters will return to factory settings if selected. This is similar to press the reset button on the bottom of the camera. Figure 6.78 6.9.4 reboot click reboot system to reboot the camera. This is similar to unplugging the ...

  • Page 71

    31-7-2014 71 ebode ipv38p2p : the type of records files, here supports two typs: normal record, alarm record and all records. : click this button to search all record files satisfy the conditions you selected. 2) search record files on this panel you can see all record files satisfy the conditions y...

  • Page 72

    31-7-2014 72 ebode ipv38p2p double click the plug-in to install it. Figure 8.2 continue to finish the installation, and then it will be successful. Figure 8.3 please check if the plug-in was successfully installed or not. Figure 8.4 restart safari to enable the plug-in..

  • Page 73

    31-7-2014 73 ebode ipv38p2p 8.1.2 how to download and install the activex for firefox users for the first time login the camera, it may prompt you to download plugin. Figure 8.5 drag the download file to firefox web page and it will prompt you to install it. Figure 8.6 reboot the firefox after the p...

  • Page 74

    31-7-2014 74 ebode ipv38p2p note:if you could not view living video after running the activex, only a red cross in the center of the video or just a black screen. Please change another port number to try. Make sure all firewall or antivirus software on your computer does not block the active downloa...

  • Page 75

    31-7-2014 75 ebode ipv38p2p figure 8.9 reboot the browser and relogin the camera, you will see the surveillance window. 8.1.4 i have forgotten the administrator password to reset the administrator username and password, press and hold down the reset button for 5 seconds. Upon releasing the reset but...

  • Page 76

    31-7-2014 76 ebode ipv38p2p figure 8.10 if you allow the activex running, but still could not see living video. Please change another port number to try. Don’t use port 88. Figure 8.11 make sure that the firewall/anti-virus software does not block the camera or activex. If you could not see video, p...

  • Page 77

    31-7-2014 77 ebode ipv38p2p 8.1.9 upnp always failed upnp only contains port forwarding in our recent software. Sometimes, it may be failed to do port forwarding automatically because of firewall or anti-virus software. It also has much relation with router’s security settings. So we recommend you d...

  • Page 78

    31-7-2014 78 ebode ipv38p2p infrared mode automatic or manual pan/tilt angle horizontal:300° & vertical: 120° night visibility 11pcs ir-leds, night vision range up to 8 meters audio input/output supports two-way audio, built-in mic & speaker, 3.5mm audio jack for external mic & speaker audio compres...

  • Page 79

    31-7-2014 79 ebode ipv38p2p 8.4 ce & fcc electromagnetic compatibility (emc) fcc statement this device compiles with fcc rules part 15. Operation is subject to the following two conditions.  this device may not cause harmful interference, and  this device must accept any interference received, inc...

  • Page 80

    31-7-2014 80 ebode ipv38p2p declaration of conformity hereby, ebode electronics, declares that this ebode ipv38p2p is in compliance with the essential requirements and other relevant provisions of the following directives: directive 2004/108/ec of the european parliament and of the council of 15 dec...

  • Page 81

    31-7-2014 81 ebode ipv38p2p declaration of conformity to r&tte directive 1999/5/ec for the european community, switzerland, norway, iceland and liechtenstein product category: general consumer (category 3). English: this equipment is in compliance with the essential requirements and other relevant p...

  • Page 82

    31-7-2014 82 ebode ipv38p2p also available from ebode: bluetooth speaker and bluetooth receiver .. Use the bt sound to share the music on your smartphone, tablet or laptop wirelessly with your friends. As the bt sound is small in size you can enjoy your favourite songs any place, anytime, anywhere! ...

  • Page 83

    31-7-2014 83 ebode ipv38p2p also available from ebode: fm transmitters and infrared products .. Plug the fm sound in your smartphone and send the music wireless to your (car)radio. Works with any free frequency. Available for ipod, iphone, ipad, android, and any other device with a 3.5mm plug. The e...

  • Page 84: Www.Ebodeelectronics.Eu

    31-7-2014 84 ebode ipv38p2p www.Ebodeelectronics.Eu.