Ebode VLHD30 User Manual - page 6
31-5-2012 6 ebode VLHD30
Receiver
① Receptor for the power Adapter
5V/2A, using power supply with different Voltage rating than the one included with
the VLHD30 will cause damage and void warranty for these products.
② HDMI Output connector
Connect all devices with a good quality HDMI High Speed Cable to make sure
The connection is in the best possible condition.
③ Network Link LED status
After the power is connected, the green LED in the front will show the communication
status. When the LED has turned green, your connection has succeeded. When the
green LED is off, the connection is not complete or out of range. When the LED is
flashing green, your device is defective.
④ Video Link LED status
When the HDMI cable is connected, the LED shows the video connected status. When
the LED is green, it show the video connect has succeeded. When the green LED is
off, it show the video connect has failed or is not complete, make sure your TV is on,
connected with the HDMI cable and on the right channel (source HDMI).
⑤ This button is reserved for some extended functionality
⑥ IR control receiving port
Aim the original remote of your video source to this window to control the source.
⑦ Power LED