EBS EBS-1500 SERIES Basic Manual - 5. Routine Maintenance
EBS Ink-Jet Systems GmbH,
Alte Ziegelei 19-25, D-51588 Nümbrecht, Germany.
+49 (0)2293/939-0, FAX. +49 (0)2293/939-3, e-mail:
mail@ebs-inkjet.de
4.6.3. Stopping the Printing
The printing can be terminated in three ways:
• With
the
STOP PRINTING command.
¤
£
V
¤
£
V
The current text file is printed to
the end and the printing is
terminated
• With
the
QUICK STOP command.
¤
£
V
¤
£
V
The printing of the current text
file is interrupted
• With
the
PRINT ON/OFF key on the operation-panel function pad (when the key is pressed, the
STOP PRINTING command is executed). The key can be used no matter where the cursor is positioned
within the control menu (for example, you can stop the printing while editing a subfile).
4.7.
Switching the Printer Off
The printer may be switched off at any time (even during printing). Just switch the Power switch
POWER
ON
OFF
to
the OFF position.
On switching the unit off protect the heads. You need to do the following.
• plug the ink pot vent with a cap (item 3 in
Fig. 2.1
),
• place a seal cover onto the nozzle plate and push it down until it snaps. The cover will protect the nozzles from
getting dirty and ink from drying up inside the nozzles.
seal cover
Fig.
4.7.1
5. Routine Maintenance
5.1.
Replacing Ink Bottle
A low ink level in the ink bottle is signalled with the INK INK LACK messages in the terminal operating window. A
new bottle of ink should be installed before the ink in the bottle is consumed completely (and the no-ink condition is
12
20060214#1.0
edited on 2006.02.14
11