Product support eccotemp.Com/help-desk shop online eccotemp.Com/products store locator eccotemp.Com/locator 866-356-1992 support@eccotemp.Com 315-a industrial road, summerville, sc 29483 eccotemp point of use tankless water heaters ep-2.4 / ep-7.0 installation and operating instruction manual.
Electric tankless point of use water heater installation guide & owners manual this manual is provided as a guide to installation. All installations must comply with any and all local and national electrical and plumbing codes. Warranty of this heater will depend on proper installation and operation...
A. Mounting the unit the unit must be mounted level on the wall (or with the water fittings up to 3° higher in the vertical position). Be sure to allow adequate clearance and proper orientation for field wiring installation and inspection. It can only be mounted in one of four possible orientations ...
B. Plumbing hook-up 1. The unit is supplied with 3/4” npt fittings molded into the heating chamber. Do not use pipe dope or pvc primer or glue on the fittings. Do not use a torch on any fitting connected to the heater. Use only teflon tape on the threads ensuring that no tape or debris enters the he...
D. Electrical hook-up 1. Wire entry into the unit should be made through the knockout in the bottom of the cover. 2. Cover end cap must be removed to allow installation and inspection of proper wiring. (verify correct installation in accordance with diagram on page 2 of this manual prior to wiring u...
E. Limited warranty eccotemp systems, llc, hereinafter eccotemp, warrants the chamber body and heating element of its tankless water heaters against defects in materials and workmanship for a period of three years. The chamber body and heating element as referred to herein shall mean the plastic bod...
F. Applications point of use models point of use models are designed to be connected to the cold water line near the desired point of use needing hot water. Unit must be properly sized to provide sufficient hot water for the desired number of fixtures to be served. Contact your dealer or eccotemp sa...
Troubleshooting the eccotemp microprocessor control depends on the temperature information it receives from each of the temperature sensors to detect water flow and maintain proper temperature. If any sensor or its connection to the circuit board is bad, the eccotemp may not turn on at all or if it ...
Product support eccotemp.Com/help-desk shop online eccotemp.Com/products store locator eccotemp.Com/locator 866-356-1992 support@eccotemp.Com 315-a industrial road, summerville, sc 29483 eccotemp point of use tankless water heaters ep-2.4 / ep-7.0 installation and operating instruction manual.
