1. DL manuals
  2. Eccs
  3. DVR
  4. E0824
  5. User Manual

Eccs E0824 User Manual

Summary of E0824

  • Page 1

    1 realtime dvr 4, 8, 16 channel models user’s manual stand alone digital video recorder ekfq3_v2.08-o199 this document contains preliminary information and is subject to change without notice..

  • Page 2

    1 fcc compliance statement notice to users : this equipment has been tested and found to comply with the limits for a class a digital device. Pursuant to part 15 of the fcc rules, these limits are designed to provide reasonable protection against harmful interference when the equipment is operated i...

  • Page 3

    2 cautions } this product has multiple-rated voltages (110v and 220v). See installation instructions before connecting to the power supply. } this product uses a lithium battery. } to avoid any risk of explosion, do not replace the battery on the main board by anything other than a lithium battery. ...

  • Page 4

    3 never push objects of any kind through openings of this equipment as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the equipment. 12. Servicing do not attempt to service this equipment yourself. Refer all...

  • Page 5: The List of Configuration

    4 dvr set a type 4ch 8ch 16ch b type 4ch 8ch 16ch cd (software/manual) remote controller manual screws data cable (sata cable) hdd brackets (optional) power cable the list of configuration.

  • Page 6: Operation Precautions

    5 operation precautions } power off y do not turn dvr off, or plug off the power adapter while dvr is in operation (record/playback). Otherwise, it may cause permanent damage to the equipment. Please click () setup>system>shutdown sequentially and then remove the power after dvr is shutdown complete...

  • Page 7: Table of Contents

    6 server 1. Product features ---------------------------------------- 8 1.1 unpacking ------------------------------------------------------ 8 1.2 service ---------------------------------------------------------- 8 1.3 system connection diagram------------------------------ 8 2. Installation - ----...

  • Page 8

    7 5.1.8 emergency recording------------------------------------- 46 5.2 search --------------------------------------------------------- 46 5.2.1 date/time search ------------------------------------------ 46 5.2.2 calendar search -------------------------------------------- 46 5.2.3 event search --...

  • Page 9: 1. Product

    8 1.1 unpacking y this equipment is an electronic appliance, so it should be handled with special care. Y after unpacking, please check if all the following items are included. - dvr main body - a type power supply adapter (dc 12v, 5a) and power supply cable - b type power supply adapter (dc 12v, 6....

  • Page 10

    9 b type - 4 / 8 / 16 channel series dvr.

  • Page 11: 2. Installation

    10 2.1 hard disk and dvd-rw installation 2.1.1 sata port y main substrate of this dvr has three sata ports: they are indicated as sata 1,2 and sata 3.( a type ) main substrate of this dvr has four sata ports: they are indicated as sata 1,2 and sata 3,4.( b type ) y up to two sata devices (hard disk ...

  • Page 12

    11 2.1.4 dvd-rw installation y securely fix dvd-rw by using bracket and screws provided herewith. Y please do not use any different dvd-rw cables (data cable and power supply cable) other than the ones we provide. Otherwise, it may cause damage to the dvd-rw. Y only one dvd-rw can be used. Mount it ...

  • Page 13

    12 y put the clip pin into the switch hole on the monitor (live) screen and keep pressing until you feel the switch has clicked. 2.2.10 power supply connections y a type : plug the power supply adapter (dc 12v, 5a) which include in this product to ’dc12v’ connector and plug another side to power sou...

  • Page 14

    13 3.1 keys and leds keys ptz key operating mode setup mode ▲, ▼, ◄, ► • control pan/tilt rotation of up/down/left/right in ptz mode • up/down/left/right on screen cursor control 1 ~ 8 • camera select keys (4/8 channel dvr) 1 ~ 10 • camera select keys (4/8/16 channel dvr) display • select sequence m...

  • Page 15

    14 3.2 camera select keys for 16 channel dvr . A type model y below shows how to select camera channel for 4 channel dvr – select camera no. 1~4: press key and use 1~4 key y below shows how to select camera channel for 8 channel dvr – select camera no. 1~8: press key and use 1~8 key y below shows ho...

  • Page 16

    15 b type model 3.4 using a remote controller y usage of a remote controller is same as the front panel keys. Y follow the procedure below when you use the remote controller for multi dvrs. ① check system id (e.G., between 1 and 999) of the dvr you wish to use (setup>system>information>status>system...

  • Page 17

    16 3.6 screen icons icon description icon description continuous recording mode in audio recording event recording mode (alarm in/motion) 4 cms access indication/ no. Of accesses (up to 4) in recording in channel sequencing ptz registration / ptz mode lock remote controller setup in hdd overwrite mo...

  • Page 18: 4. Setup

    17 4.1 login/logout y at the default setting of dvr, you have to input the password to enter the set up menu. Y please press setup key to enter the setup menu and the following screen will appear. Y in order to use all functions and privileges, login is as id: admin. Y default password is “1111”. Y ...

  • Page 19

    18 4.2 system 4.2.1 information y please click () system>information and the following screen will appear. Site description y decide name of dvr. Y please click () keyboard icon on site description frame and the following virtual keyboard will appear. Y please click () desired letters (characters) o...

  • Page 20

    19 y import: copy the menu setup stored in usb memory stick into dvr. Please plug in the memory stick and then click () import. Y export: store the menu setup of dvr in usb memory stick. Please plug in the memory stick and then click () export. Y when you are working on default, import, export, a me...

  • Page 21

    20 overwrite setting y click() overwrite setting button and the following screen will appear. Y you may set for beeping or notifying messages that notify the used percentage of disk. Y check disk overwrite and you may activate the overwrite function. This function makes restart the recording from th...

  • Page 22

    21 date y this menu will allow you to adjust the settings. Y please follow the procedure below for time adjustment. ① click () items (y, m, d) you want to change. A designated item will be highlighted in a box (y: year, m: month and d: date). ② adjust the number by clicking () ▲, ▼ buttons on the ri...

  • Page 23

    22 time format y set time indication format. Please click () time format frame to select a format you like from the list. Y when you complete date/time input, please click () ntp and the following screen will appear. Y this menu is for accurate setting of time of day clock in dvr. Y you may check 5 ...

  • Page 24

    23 y four rows will show as follows: – 1: sata 1 port – 2: sata 2 port – 3: sata 3 port – 4: sata 4 port( b type model only ) format y you must format when you: – install new hdd – add another hdd – replace hdd – move hdd (change installation port) – remove hdd y click () add/remove frame in format ...

  • Page 25

    24 y click () inspection time frame to set inspection time. Y click check by frame to select inspection interval. Y last check time: show the time of the last inspection. Y click () ▲, ▼ direction buttons on the right-hand side of temperature frame to adjust to maximum temperature for the hdd used i...

  • Page 26

    25 y please click () new user and the following screen will appear. Y click () the keyboard icon on the right-hand side of user name frame and the virtual keyboard will appear. Click desired characteristics (up to 8 characteristics) on the virtual keyboard. Y input password and confirm. Y choose ‘ok...

  • Page 27

    26 y this is a screen for password resetting y input password by clicking the keyboard icon on the right-hand side of the frame. Y use key if you wish to erase password on keyboard. 4.2.4 system log y please click () system>system log and the following screen will appear. Y system log system log dis...

  • Page 28

    27 – usb upgrade success/fail – dvr setup change by remote – before/after time adjust y system log removal procedure is as follows: – execute clear all data in system>information>record and choose ‘ok’ on the popup dialogue box. Please note that all normal recorded video data are deleted from databa...

  • Page 29

    28 y the osd menu will allow you to configure full features (i.E., on/off every letter and icon) displayed on the screen. Y letters and icons are divided under system and camera categories. If you click () ‘all’, all items are on/off at once. Osd margin y the osd margin menu will allow you to adjust...

  • Page 30

    29 transparency y the transparency menu will allow you to alpha-blending of osd menu on the monitor. Transparency is the quality that an object or substance has when you can see through it. Y transparency range is between 0 and 100, with a larger number representing can see through it. (default 0) y...

  • Page 31

    30 y this menu will allow adjust interval of channel sequencing of spot monitor. Y click () spot select to choose spot monitor to be set up. Y check (check box next to the camera you want to include in sequencing. Any camera with unchecked check box will be excluded from channel sequencing. Y adjust...

  • Page 32

    31 network type y please click () network type. Every time you click (), it changes to static (fixed ip) and dhcp (floating ip). Y in static, user must manually set the static ip address for use. – set ip address, subnet mask and gateway. Please ask your network administrator for more details. – to ...

  • Page 33

    32 y ‘floating ip system’, although being predominantly used over internet, is very inconvenient for users because its address varies every time you access. The best alternative is ddns (dynamic domain naming system) which uses name (domain name) instead of ip address (numbers). Ddns automatically r...

  • Page 34

    33 y network video transmission speed and quality can be configured by pressing “frames” and “quality” buttons as follows. - frames : 1, 2, 3, 4, 5, 7, 15, 30 frames for ntsc(1, 2, 3, 4, 5, 6, 12, 25 frames for pal) - quality : std. 1, std. 2, std. 3, std. 4 (standard), high 1, high 2, high 3, super...

  • Page 35

    34 y give titles to cameras and choose ptz protocols. Y click () the keyboard icon on the right-hand side of each frame on title column and the virtual keyboard will appear. Then, register titles of cameras. Y if you check 5 a check box on no column, a video of the corresponding camera is recorded a...

  • Page 36

    35 y the audio menu will allow you to choose whether to record audio. Y when you check 5 a check box on no column, corresponding audio and video are recorded. However, if you do not check the check box, recording stops. Y choose ‘ok’ to confirm the setting. 4.4.4 alarm in y please click () devices>a...

  • Page 37

    36 y click () the keyboard icon on the right-hand side of each frame on title column and the virtual keyboard will appear. Then, please register the title of alarm output. Y when you check 5 a check box on no column, a corresponding alarm output starts operating. However, if you do not check the che...

  • Page 38

    37 y the event menu will allow you to set event videos. Y each frame on title column shows camera title registered in devices>camera/ptz. You cannot change camera titles here. Y click () each frame on resolution column to select recording resolution of a corresponding camera. You may select one of 7...

  • Page 39

    38 network setting dual streaming disabled dual streaming enabled ntsc(pal) 360x240 720x240 720x480 360x240 720x240 720x480 4 channel dvr 120(100) 120(100) 60(50) 120(100) 120(100) 60(50) 8 channel dvr 240(200) 120(100) 60(50) 240(200) 120(100) 60(50) 16 channel dvr 480(400) 240(200) 120(100) 240(20...

  • Page 40

    39 4.5.3 pre alarm y please () record>pre alarm and the following will appear. Y pre alarm is effectively used when you selected recording mode by alarm or motion. Y the pre alarm will allow you to check, during playback, the previously recorded video before the record start time. Y each frame on ti...

  • Page 41

    40 – camera: select camera for setup. – sensitivity: select sensitivity (low, normal and high) – motion display on/off : display motion trace on/off – reverse vert: activate the entire column at the cursor’s position. – reverse horz: activate the entire row at the cursor’s position. – select all: ac...

  • Page 42

    41 y the link menu will allow you to set recording modes of all kinds of alarms (sensor, motion event, video loss, system event, etc.), alarm output, e-mail notification and the like. 4.6.1 alarm in y please click () link>alarm in and the following screen will appear. Y select cameras for recording ...

  • Page 43

    42 ⑤ repeat the above procedure for motion event 2~ motion event 16. Y click()by duration box to set up the recording duration and prevent recording caused by event. The duration time can be controlled by previous setting mode: record>settings>event y choose ‘ok’ to confirm the setting. 4.6.3 video ...

  • Page 44

    43 than two alarm outputs can be set. ④ select e-mail addresses for notification when emergency occurs. Please check 5 a check box under link notification. More than two e-mail addresses can be set. Y choose ‘ok’ to confirm the setting. 4.6.5 popup link y please click () link>popup link and the foll...

  • Page 45: 5. Operation

    44 5.1 viewing 5.1.1 first image y power on dvr and the following live video will appear, while viewing and recording at the same time. Y the screen will display date/time and icons below. Icon description continuous recording mode event recording mode (alarm in/motion) in recording ptz registration...

  • Page 46

    45 – split screen: please press display key and the available split screens (or multi-window view formats) will display alternately (i.E., 2x2, 3x3 and 4x4). – channel sequencing: please press sequence key to display images in sequencing view format periodically. This automatic sequence function is ...

  • Page 47

    46 run group tour 1~9 run pattern 1~9 y to use a mouse in pan/tilt mode, please move the cursor to the lower portion near the center of the screen. To use front button in pan/tilt mode, please push setup button. A key pad control will show as follows: y to save current camera number, select preset n...

  • Page 48

    47 y once the key lock function is on, you cannot use any key. If you want to use a key, please enter the correct password to release the key lock function. If password is not required, simply press enter key. 5.1.8 emergency recording y when you press emergency key, recording starts right away rega...

  • Page 49

    48 y dates and time with recorded data available will be high-lighted. Y follow the procedure below to search video by calendar. ① select year and month by using the arrow buttons in the calendar. – : search subsequent ‘year’ – : search previous ‘year’ – : search subsequent ‘month’ – : search previo...

  • Page 50

    49 ① designate event search start time. ② designate event search end time. ③ select camera (video) to search data. ④ check a check box (motion / alarm in / emergency) check box. ⑤ click on search index button to recorded search event data. 5.3 playback y this involves searching recorded video to pla...

  • Page 51

    50 y move the cursor of the mouse and the keypad control will appear at the bottom near the center of the screen. Y every time you press the play/pause key during playback mode, it is changed to ‘1x play’ and ‘pause’. The displayed sign on the screen also changes from to ii. Y following is the key u...

  • Page 52

    51 ② click () format frame to select exe or jpeg. Choose exe for storing moving images; and jpeg for still images. ③ click () the keyboard display on the right-hand side of from frame to set the storage start time. ④ click () the keyboard display on the right-hand side of to frame to set the storage...

  • Page 53

    52 y if you click (default), proper number of color control or hstart/vstart will appear automatically. Please choose ‘ok’ to confirm the setting. Y click ( ) ▲, ▼ direction buttons on the right-hand side of brightness/contrast/saturation to set adjust color of the screen (i.E. 0 ~ 255) y click ( ) ...

  • Page 54: Cms

    53 cms (central monitoring station) user’s manual stand alone digital video recorder v2.08-o199 this document contains preliminary information and is subject to change without notice..

  • Page 55: 6. Program

    54 6.1 system recommendations y the followings are our recommendations for system configurations/specifications used with cms. - processor: intel pentium(r) (at 2.8ghz or higher) - memory: 1.00gb or more - video: 128 mb agp vga card, 1024 x 768 resolution, 32-bit color, directx® 8.1 version or later...

  • Page 56

    55 ⑦ when the following screen appears, click install. ⑧ when the following screen appears, click finish to complete the installation. 6.3 login y after you install cms software, cms icon below appears on your desktop. Y please double click on the icon to execute the program. Cms.

  • Page 57

    56 y below lists are functions of the program. Icon icon name watch mode search mode remarks system log dvr system log ptz control dvr ptz control system health check dvr system health check dvr data playback dvr data playback cms(pc) data playback cms(pc) data playback dvr event record data dvr eve...

  • Page 58: 8. Watch

    57 8.1 login screen y when you login cms, the following screen will appear. This screen is of watch mode. Y because it is not connected to dvr, images do not show. Y please do local setting first before connecting to dvr. 8.2 local setting y please click local setting button of toolbar and the follo...

  • Page 59

    58 - manager/user: allow user to authority. Y save option: allow user to select drive(c, d) and folder to save data. Y choose ‘ok’ to confirm the setting. 8.2.2 remote site y this menu is for network setup. Y make cms ip address and port coincide with dvr. Y remote site connection setup - site name:...

  • Page 60

    59 - click “scan dvr” button then ip address of dvr will be listed which is currently connected with pc in the network. - select the ip address and click “add site” then the connected dvr is automatically registered in the cms. Y camera name - it helps to set the camera name in cms program other tha...

  • Page 61

    60 8.3 live video 8.3.1 network connection y as the setup is completed, you are now ready to connect cms to dvr over network. Y please click in remote dvr on the screen. Y it will turn to yellow, while being activated. Y please click remote connect button. Y if a popup window for id/password appears...

  • Page 62

    61 3 date/time led 4 site tree (dvr and channels) 5 color control bar 6 instant record button 7 system log 8 alarm out channels 9 audio channels 10 two way audio 11 video display screen 12 network connect/disconnect button/exit cms 8.3.2 watch mode the first image (or the initial image) shows the av...

  • Page 63

    62 y e map: load and close e map image program. Y mouse double click: if you double click the mouse on a split screen, it will turn to full screen mode. Double click the mouse to back to the previous watch mode. 8.3.3 multi screen y cms supports multi remote site connections simultaneously. Y server...

  • Page 64

    63 8.3.7 alarm out y this is for operating alarm out of a selected dvr from a remote distance. Y click a channel number and alarm out of the corresponding channel will operate. Y if you see an intruder, use this function to turn on a siren in an area where the dvr is installed. 8.3.8 one touch recor...

  • Page 65

    64 ③ preset control button y click on preset control button and the following screen will appear. Please input title and preset number. Y when you completed input, please choose ‘ok’ to confirm. Y press log button to go back to live video. 8.5 health check y this function allows you to check operati...

  • Page 66

    65 5 motion recording status 6 alarm in connection and operating status 7 alarm out connection and operating status 8 version 9 recording start/end date and time 8.5.1 camera connections and operating status y camera is in normal operation. Y camera is not in use. Y camera is not connected or video ...

  • Page 67

    66 y click on remote setting button in watch mode and the following setup menu same as dvr’s will appear on cms screen. Y the setup procedure is same as that of dvr. Y when the setup is completed, do not click exit button on the setup screen, but click ok or cancel button on the remote setup screen..

  • Page 68: 9. Search

    67 9.1 search screen y this menu is for playing back from recorded data. Y click on remote search button in watch mode and the following screen mode screen will appear. Y search mode provides three search functions. One is for searching dvr video by clicking remote search button and another is for s...

  • Page 69

    68 search previous ‘year’ search subsequent ‘year’ search previous ‘month’ search subsequent ‘month’ 1 fast forward/backward & playback (click to increase the speed by x1, x2, x4, x8, x16, x32, x64 and extreme) 2 select camera to be played back 3 time led (24 hour) 4 data bar (recorded data) 5 time ...

  • Page 70

    69 ① designate event search start time. ② designate event search end time. ③ select camera (video) to search data. ④ check a check box (motion/alarm in/emergency) check box ⑤ click on search index button to recorded search event data. 9.5 playback 9.5.1 playback control button y select time and clic...

  • Page 71

    70 9.5.3 save y this is for saving still image(s) in bitmap or jpeg file. Y click image save button and the following screen will appear. Y input the name of the file to save and execute save. 9.5.4 archive y this is to back up the dvr’s moving image data to exe file in pc(cms). Y work only in playb...

  • Page 72

    71 ② designate archive end time. ③ designate file name. ④ select camera (video) to save. ⑤ click on start button to begin archive..

  • Page 73: 10.   Others

    72 10.1 viewer y the format of archive file is .Exe(executable file). Y please double click on the icon to execute the program. Play • playback mode: 1x play pause • playback mode: pause backward • frame-by-frame backward still image playback forward • frame-by-frame forward still image playback rew...

  • Page 74

    73 y please click on the icon to load the image file. Y , , , , to move the icon just drag and drop. Y you can also rotate the icon. Y please click on the icon and input the name of the e map file to save and execute. Y please click on the icon to exit program. Y please click on cms (pc) setup and s...

  • Page 75

    74 y to open the check .Exe or .Jpg or .Bmp file just click load file button. Y to click the check button, you will get following message; result: verification ok ! Corrupted or modified 10.4 estimator y when you set up cms program, the application, estimator will set up additionally. Y the operatio...

  • Page 76: Keyboard Controller

    75 keyboard controller cp1200a user’s manual keyboard controller v2.08-o199 this document contains preliminary information and is subject to change without notice..

  • Page 77

    76 11.1 connection user may connect cameras and keyboard through dvr in various ways. Below shows the major probable connection methods through rs-485; 11.1.1 configuration diagram i – single system configuration (1 camera, 1 dvr) 11.1.2 configuration diagram ii – multiple system configuration (mult...

  • Page 78

    77 11.1.3 configuration diagram iii – multiple system configuration (multi cameras, multi dvrs) y please make sure to connect “tx to rx “or “rx to tx” with positive polarity. (+ to +) and (- to -) 11.2 keyboard setup in dvr y enter “setup>system>information: system id” and define the id of dvr y whe...

  • Page 79

    78 11.3 keyboard configuration 11.4 operation 11.4.1 dvr / ptz mode conversion y press system id number (for example, id: 001 press num pad ) with button. Y osd will show “kbd:1” in right-bottom side that the keyboard is on dvr mode as below picture; y then, user should be able to operate the dvr fu...

  • Page 80

    79 - emergency: turn on/off emergency record function. - event: pop up a window to see system log. - pip: turn on/off pip screen in case of 1 channel screen. If pip function is on, user number key(s) + ent key to change the pip channel. In case of 4 or 9 channel screen, it changes the screen to a ne...

  • Page 81: Serial In (Pos / Atm)

    80 serial in (pos / atm) user’s manual serial in (pos / atm) v2.08-o199 this document contains preliminary information and is subject to change without notice..

  • Page 82

    81 12.1 usage of serial-in function y enables to record/search/display all transactions on monitoring screen by connecting pos/atm/cash register. Y user can choose the data whether to record/display on their taste without limitedly designated protocols 12.2 connection method y this model has one atm...

  • Page 83

    82 12.4 link 12.4.1 link setup y click “setup>link>” then shows as below y click “serial in” to appear following screen. Y select pos/atm port by clicking ‘serial in’ button. Y assign the port to display/record channel by clicking a “link camera”. Y select “link alarm out” item to run alarm output w...

  • Page 84

    83 12.4.2 schedule setup y click “record>schedule>” then shows as below y tick the box(□) item alarmin y click the time/date that wish to activate atm/pos function on schedule. Y it is possible to activate all the time by clicking top-right side of table. Y click “ok” to save the schedules. 12.5 set...

  • Page 85

    84 12.5.1 title y click “title” item then virtual keyboard will appear. Y input the title then click ( ) to save. 12.5.2 port setting y press ( ) the “port setting” button in order to set up the port. Default values are baud rate 2400 bps, data bit 5 bit, stop bit 1 bit, parity none. Y when the setu...

  • Page 86

    85 y analyze among the automatically captured data which will be displayed or discarded then enter pattern setting. - unless you check “auto” item, make sure to set up “start pattern” and “end pattern” - “discard pattern”, “line delimiter” and “mcpl” are utilized independently, not relation to “auto...

  • Page 87

    86 y input a certain repeated string to “line delimiter”. Y decide the number of minimum characters in “mcpl” item to hide data under the designated number of characters. Y input the pattern of dummy data to discard pattern..

  • Page 88

    87 y choose the data which willing to display and enter the start pattern and end pattern. Y then tick the auto box off in order to make the dvr recognizes the data between the start and end patterns. Y finally, test again and adjust data to remove missed dummy data. 12.6 search y using event search...

  • Page 89: Cms Web Client

    88 cms web client user’s manual v2.08-o199 this document contains preliminary information and is subject to change without notice. Cms web client.

  • Page 90

    89 13.1 setup and login y ms explorer web browser is required for installation and using this program. Y open a browser and type the ip address of dvr. Y it is required to install activex in the first connection. Y basically, explorer limits automatic activex installation. Y click the message above ...

  • Page 91

    90 13.2 live display. Y after login, following screen will appear. Y the screen contains following features: 1. Display current live video 2. Setting display mode - playback : transferring search mode. - freeze : pause current display. - resume : resume paused display. - quit : finish program and cl...

  • Page 92

    91 5. Channel selection button - available to check the channel (camera) number of current display. 13.3 playback screen y click [playback] then following screen will appear. Y the screen contains following features: 1. Searched playback video displays 2. Transferring live mode 3. Setting date/time ...

  • Page 93: Mobile Cms

    92 mobile cms user’s manual v2.08-o199 this document contains preliminary information and is subject to change without notice. Mobile cms.

  • Page 94

    93 14.1 requirements y os : windows mobile 6.1 or higher version. Y memory : 512kb or higher. Y device : smartphone y network : available all wireless networking method. I.E. Wi-fi, hsdpa, wibro. 14.2 installation y prepare activesync program to user’s pc. - available download at following link. - h...

  • Page 95

    94 y click accepting the license agreement, then click “finish” button. Y installation box will appear y click [ok] to start installation. Y when installation completed, following pop-up will appear. Y click [ok]. Y if following message appeared, it has successfully installed..

  • Page 96

    95 y move to [programs] page to check whether cms has installed. 14.3 site configuration y start cms, following screen will appear. (note) depending on mobile device, successful installation message may not appear. Click [ok] when license agreement message appear..

  • Page 97

    96 y click [add] to appear following screen. Y fill in correct information. - site name : insert the name of site. - ip/domain : insert the ip address or domain name of the site. - id : input the registered id of the site. - password : input the password of the registered id. - command port : insert...

  • Page 98

    97 y select a site and click [edit] then following screen will appear. Y correct items then click [save]. Y select a site and click [del]. Y confirmation message will pop up. Delete edit.

  • Page 99

    98 y click [yes] then the site information will be removed. 14.4 connect y select a site then click [connect]. Y live display screen of the site will appear if it is successfully connected. Y users are able to select a camera by clicking camera button. Y click [disconnect] then, live display screen ...

  • Page 100

    99 y choose mobilecms on the list and click [remove]. Y confirmation message will pop up y click [yes] to complete uninstall then program will be removed..