ECG MS 002 B Operating Manual - page 25
24
EN
25
4. To change clock format to “24 Hr”, press sET / ALM sET button; to switch between “12 Hr” and “24 Hr”
time format, press v / V button. After “12 Hr” selection, AM / PM icon is shown.
5. After next pressing sET / ALM sET button, time figure “00” flashes on clock; to select time zone, press
v
/ V button:
“00” = GMT +1 hour (i.e. Czech Republic)
“01” = GMT +2 hours (i.e. Finland)
“-01” = GMT 00 (i.e. Great Britain)
6. After next pressing sET / ALM sET button, time figures are shown and hours figures flash. To set hour,
press v / V button.
7. After next pressing sET / ALM sET button, hour figures flash. To set minutes, press v / V button.
8. To return to normal mode, press sET / ALM sET button; if you do not press any button within 8 seconds,
the device returns to normal mode automatically.
ALARM CLoCK sETUP
By pressing sET / ALM sET button, time figures on alarm clock change into “7:00 AL”. By holding sET / ALM
sET button for 2 second, hour figures start to flash. To set desires alarm hour, press v / V button.
After next pressing sET / ALM sET button, minute figures flash. To set desires alarm minutes, press v / V
button.
After next pressing sET / ALM sET button, minute figures change into flashing “05”. To set snooze time
between 1 and 20 minutes, press v / V button.
To return to operating mode, press sET / ALM sET button; if you do not press any button within 8 seconds,
the device returns to operating mode automatically.
ALARM CLoCK TURN oN AND oFF
To view alarm clock setup, press sET / ALM sET button. To turn on / off daily alarm hours, press v button.
While alarm is turned on, icon is shown between hour and minute figures.
sNooZE FUNCTioN UsE
Once the set alarm time is reached, the device generates alarm sound. icon flashes.
1) To turn off alarm temporarily, press sNooZE button; icon still flashes. Alarm clock begins to sound
after 5 minutes.
2) To stop alarm sound, press v / CHANNEL (ALM on-off) button; “bell” icon stops to flash and alarm clock
will sound at the same time next day.
Alarm duration: 2 minutes
TEMPERATURE DisPLAY iN °C oR °F
To show temperature in C or F, press V (°C/°F) button.