Operator’s manual chain saw cs-2700es achtung gefahr lesen sie die bedienungsanleitung sorgfÄltig durch und befolgen sie die sicherheitsbestimmungen, weil sonst das risiko schwerer verletzungen besteht. Warning danger read instructions carefully and follow rules for safe operation. Failure to do so ...
2 cs-2700es e n g l i s h d e u t s c h i t a l i a n o introduction contents introduction ........................................................ 2 decals and symbols .......................................... 3 rules for safe operation .............................. 6 description ...................
3 cs-2700es e n g l i s h d e u t s c h i t a l i a n o decals and symbols gb carefully read the operator’s manual wear eyes, ears and head protection carburettor adjustment - idle speed carburettor adjustment - high speed mixture carburettor adjustment - low speed mixture petrol and oil mixture thi...
4 cs-2700es e n g l i s h d e u t s c h i t a l i a n o symbole fÜr die bedienungselemente und anderen hinweise d warnung die bedienungsanleitung sorgfältig durchlesen augen-, ohren- und kopfschutz tragen vergaserjustierung - leerlauf-drehzahl vergaserjustierung - schnell-gemisch vergaserjustierung ...
5 cs-2700es e n g l i s h d e u t s c h i t a l i a n o decalcomanie e simboli i “avvertenza, vedere il manuale dell’operatore ” indossare mezzi di protezione degli occhi, dell’udito e del capo regolazione carburatore - al minimo regolazione carburatore - miscela alta velocità regolazione carburator...
6 cs-2700es e n g l i s h d e u t s c h i t a l i a n o rules for safe operation operator’s manual • read the operator’s manual for your chain saw carefully. Be thoroughly familiar with the chain saw’s controls and how to use the chain saw properly. Failure to follow instructions could lead to perso...
7 cs-2700es e n g l i s h d e u t s c h i t a l i a n o 1 2 3 4 5, 6 1 2 3 4 5 6 caution stuffing ears with cotton is not recommended. • all persons who make part of their living using chain saws should be tested periodically for hearing deterioraration. • always wear a cap or hat when working with ...
8 cs-2700es e n g l i s h d e u t s c h i t a l i a n o • never wear loose clothing, unbuttoned jackets, flared sleeves and cuffs, scarfs, tie-strings, neckties, cords, chains, jewelry, etc. Which could snag the saw chain or underbrush. • clothing should be of sturdy, protective material. It should ...
9 cs-2700es e n g l i s h d e u t s c h i t a l i a n o 3 m starting engine • move the chain saw at least 3 m from the fuelling point before starting the engine. • do not allow other persons to be near the chain saw when you are starting or cutting with the chain saw. Keep bystanders and animals out...
10 cs-2700es e n g l i s h d e u t s c h i t a l i a n o transportation • when transporting your chain saw, use the appropriate guide bar cover. • carry the chain saw with the engine stopped, the guide bar and saw chain to the rear, and the silencer away from your body. Transport • wenn sie die moto...
11 cs-2700es e n g l i s h d e u t s c h i t a l i a n o warning danger kickback safety precaution for chain saw users kickback may occur when the nose or tip of the guide bar touches an object or when the wood closes in and pinches the saw chain in the cut. 2. Kickback safety precautions • tip cont...
12 cs-2700es e n g l i s h d e u t s c h i t a l i a n o • do not operate a chain saw with one hand! Serious injury to the operator, helpers or bystanders may result from one-handed operation. For proper control, always use two hands when operating a chain saw, one hand which operates the trigger. T...
13 cs-2700es e n g l i s h d e u t s c h i t a l i a n o 3. Other safety precautions vibration and cold it is believed that a condition called raynaud’s phenomenon, which affects the fingers of certain individuals, may be brought about by exposure to cold and vibration. Accordingly, your echo chain ...
14 cs-2700es e n g l i s h d e u t s c h i t a l i a n o repetitive stress injuries it is believed that overusing the muscles and tendons of the fingers, hands, arms and shoulders may cause soreness, swelling, numbness, weakness and extreme pain to the areas just mentioned. To reduce the risk of rep...
15 cs-2700es e n g l i s h d e u t s c h i t a l i a n o warning danger do not modify a chain saw in any way. Only attachments and parts supplied by kioritz corp. Or expressly approved by kioritz corp. For use with the specific kioritz corp. Chain saw models are authorized. Although certain unauthor...
16 cs-2700es e n g l i s h d e u t s c h i t a l i a n o services • all chain saw service, other than items listed in the operator’s manual maintenance instruction, should be performed by competent service personnel. (for example, if improper tool is used to hold the flywheel in order to remove the ...
17 cs-2700es e n g l i s h d e u t s c h i t a l i a n o chain brake the chain brake’s function is to stop chain rotation after a kickback. It neither prevents nor reduces kickback. Do not depend on the chain brake for protection against kickback. Even with a chain brake, depend on your own good sen...
18 cs-2700es e n g l i s h d e u t s c h i t a l i a n o description beschreibung descrizione delle parti english deutsch italiano gb d i (890345-39230) 23 1 2 3 4 5 6 7 8 9 10 11 21 12 13 14 15 16 17 18 19 20 22 24.
19 cs-2700es e n g l i s h d e u t s c h i t a l i a n o description (see page 18) gb 1. Operator’s manual - included with unit. Read before operation and keep for future reference to learn proper, safe operating techniques. 2. Front hand guard - guard between the front handle and the saw chain for ...
20 cs-2700es e n g l i s h d e u t s c h i t a l i a n o beschreibung (siehe seite 18) d 1. Bedienungsanleitung - mitgeliefert. Vor lnbetriebnahme lesen und als nachschlagewerk für betriebssicherheit sorgsam aufbewahren. 2. Handschutz - schutz zwischen vorderem handgriff und sägekette um die hand vo...
21 cs-2700es e n g l i s h d e u t s c h i t a l i a n o descrizione delle parti (far riferimento a pag. 18) i 1. Manuale d’istruzioni - accluso nell’imballo della macchina. Leggetelo attentamente e tenetelo come riferimento futuro per imparare le tecniche di lavoro sicure e corrette. 2. Protezione ...
22 cs-2700es e n g l i s h d e u t s c h i t a l i a n o warning danger for your own safety, always stop the engine before performing any of the following operations. Assembly mounting guide bar and chain the unit is delivererd with guide bar and saw chain separated. Install guide bar and chain as f...
23 cs-2700es e n g l i s h d e u t s c h i t a l i a n o caution 1. All adjustments should be made cold. 2. Always wear gloves when working on chain. 3. Do not operate with a loose chain. (a): proper tension (b): improper tension • tighten a nut with the bar nose held up. • pull the chain around the...
24 cs-2700es e n g l i s h d e u t s c h i t a l i a n o chain lubricant proper lubrication of the chain while in operation reduces the friction between the chain and the guide bar to a minimum and assure a longer life time. Use only special chain oil of high quality for this purpose. Do not use any...
25 cs-2700es e n g l i s h d e u t s c h i t a l i a n o starting the cold engine feature of this model: “es” start “es” start generates enough revolving power to rotate crankshaft up to a speed to ignite the engine and bring almost no kickback. “es” start makes engine start far more easier than you...
26 cs-2700es e n g l i s h d e u t s c h i t a l i a n o caution clutch engages and chain will rotate when engine is started with throttle trigger squeezed. After engine starts release throttle trigger to idle position. Starting the warm engine • confirm fuel and chain oil in the tanks. • press hand...
27 cs-2700es e n g l i s h d e u t s c h i t a l i a n o running • after engine starts, allow it to idle for a few minutes. • squeeze throttle trigger gradually to increase engine revolution. • the chain starts moving when the engine reaches 4,500 r/min approximately. • ensure proper acceleration an...
28 cs-2700es e n g l i s h d e u t s c h i t a l i a n o 1 stopping the engine • release throttle trigger and allow engine to idle. • place ignition switch in stop position. Pre cutting test • familiarize yourself with your chain saw before you start actual cutting. • for this purpose it may be wise...
29 cs-2700es e n g l i s h d e u t s c h i t a l i a n o warning danger make sure that the engine is shut off when checking chain tension. Checking chain tension • chain tension should be checked frequently during work and corrected if necessary. • tension the chain as tight as possible, but so it c...
30 cs-2700es e n g l i s h d e u t s c h i t a l i a n o correct use of chain brake warning danger most hazardous is the kickback motion of the guide bar such that, in an instant the tip of the bar touches a wood or the like. Chain brake reduces the possibility of injury due to kickback. You always ...
31 cs-2700es e n g l i s h d e u t s c h i t a l i a n o non-manual chain brake the non-manual chain brake stops the operation of the saw chain in such a manner that kickback action produced at the end of the guide bar non-manually actuates the chain brake. To make sure that the non-manual chain bra...
32 cs-2700es e n g l i s h d e u t s c h i t a l i a n o note • for practice, while cutting a small tree, push the front guard forward to engage the brake. • at all times, confirm whether the brake works properly before each work. • if the chain brake is clogged with wood chips, function of the brak...
33 cs-2700es e n g l i s h d e u t s c h i t a l i a n o cutting instruction general in all circumstances the operation of the chain saw is a one-man job. It is difficult at times to take care for your own safety, so don’t assume the responsibility for a helper as well. After you have learned the ba...
34 cs-2700es e n g l i s h d e u t s c h i t a l i a n o warning danger do not let the nose or tip of the guide bar touch anything while engine is running to avoid kickback. Achtung gefahr achten sie darauf, dass die spitze der kettenschiene bei laufendem motor nichts berÜhrt, um den rÜckschlag zu v...
35 cs-2700es e n g l i s h d e u t s c h i t a l i a n o felling a tree a falling tree can seriously damage anything it may hit a car, a house, a fence a powerline or another tree. There are ways to make a tree fall where you want it, so first decide where that is! Before cutting, clear the area aro...
36 cs-2700es e n g l i s h d e u t s c h i t a l i a n o limbing limbing a fallen tree is much the same as bucking. Never limb on the tree that you are standing. Be careful of the tip touching other limbs. Always use both hands. Don’t cut with the saw overhead or the bar in a vertical position. If t...
37 cs-2700es e n g l i s h d e u t s c h i t a l i a n o caution do not touch hot surfaces of cylinder cover and silencer, after you used the chain saw. Tension and compression in timber a length of timber lying on the ground will be subject to tension and compression depending at which points the m...
38 cs-2700es e n g l i s h d e u t s c h i t a l i a n o seitenansicht kerbe 1/3 höhe fällschnitte 2.5 bis 5 cm bild a keile draufsicht scharnier 1/10 des baumdurchmesser kerbschnitte fällschnitte fÄllen 90° bild b 1 2 3 4 5 rundum-methode kerbschnitt keile bild c draufsicht baum fÄllen ein fallende...
39 cs-2700es e n g l i s h d e u t s c h i t a l i a n o bÄume entasten das entasten eines gefallenen baums ist ähnlich wie das zerkleinern. Niemals einen baum entasten, auf dem sie stehen. Achten sie darauf, dass die spitze keine anderen Äste berührt. Stets beide hände benutzen. Nicht mit der säge ...
40 cs-2700es e n g l i s h d e u t s c h i t a l i a n o vorsicht wenn sie die auswirkungen von zug und druck falsch einschätzen und von der falschen seite aus sägen, verklemmt sich die schneideinheit im holz. Wenn sie mit eingeklemmter schneideinheit gas geben, verbrennt die kupplung. Sollte sich d...
41 cs-2700es e n g l i s h d e u t s c h i t a l i a n o abbattimento di un albero un albero abbattuto può danneggiare gravemente qualsiasi cosa colpisca: un’automobile, una casa, una palizzata, un cavo dell’elettricità o un altro albero. Vi sono tuttavia modi per far cadere un albero dove volete, q...
42 cs-2700es e n g l i s h d e u t s c h i t a l i a n o sramatura la sramatura di un albero abbattuto è molto simile al taglio del tronco in pezzi più piccoli. Non effettuate mai la sramatura stando sopra l’albero. Fate attenzione che la punta non tocchi altri rami. Usate sempre tutte due le mani. ...
43 cs-2700es e n g l i s h d e u t s c h i t a l i a n o supporto sotto il tronco fate un taglio angolare quando una sezione potrebbe andare a finire contro l’altra “cerniera” “cerniera” “cerniera” aperta chiusa taglio di indebolimento per concludere il lavoro forte pressione 1/3 del diametro estrem...
44 cs-2700es e n g l i s h d e u t s c h i t a l i a n o parte manutenzione pagina prima dell’uso ogni mese filtro aria pulire/sostituire 49 • filtro carburante ispezionare/pulire/sostituire 50 • candela ispezionare/pulire/regolare/sostituire 52 • carburatore regolare/sostituire e regolare 48 • sist...
45 cs-2700es e n g l i s h d e u t s c h i t a l i a n o no fuel at carburettor no fuel at cylinder silencer wet with fuel no spark at end of plug wire no spark at plug remedy • clean or replace • clean • ask your echo dealer • ask your echo dealer • open choke • clean/replace air filter • adjust ca...
46 cs-2700es e n g l i s h d e u t s c h i t a l i a n o problem motor - springt nicht leicht an ursache abhilfe - springt gar nicht an motor lässt kraftstoff am kein kraftstoff • kraftstoffilterelement verstopft • reinigen oder austauschen sich vergaser am vergaser • kraftstoffleitung verstopft • r...
47 cs-2700es e n g l i s h d e u t s c h i t a l i a n o guasto motore - avviamento difficile causa rimedio - non si avvia motore carburante al niente • filtro carburante ostruito • pulire o sostituire in carburatore carburante al • linea alimentazione • pulire moto carburatore carburante otturata •...
48 cs-2700es e n g l i s h d e u t s c h i t a l i a n o t: idle speed adjuster l: low speed mixture adjuster h: high speed mixture adjuster t: leerlaufdrehzahleinstellung l: leeraufgemischeinstellung h: volllastgemischeinstellung service carburettor • do not adjust the carburettor unless necessary....
49 cs-2700es e n g l i s h d e u t s c h i t a l i a n o 1. Air cleaner cover 2. Air filter 3. Cleaner cover latch air filter • check before every use. • off the cleaner cover latch, and remove air cleaner cover and filter. Brush off dust lightly, or wash it in a non-inflammable solvent if necessary...
50 cs-2700es e n g l i s h d e u t s c h i t a l i a n o 1. Oil filter oil filter • check periodically. - do not allow dust to enter oil tank. - clogged oil filter will affect the normal lubricating system. - pick it up through oil filling hole with a piece of steel wire or the like. - if the filter...
51 cs-2700es e n g l i s h d e u t s c h i t a l i a n o 1. Groove 2. Oil hole guide bar • clean before using. - clean the groove of the guide bar with for example a small screw driver. - clean oil holes with a wire. • reverse guide bar periodically. • check sprocket, clutch and clean bar mount area...
52 cs-2700es e n g l i s h d e u t s c h i t a l i a n o 0.6 - 0.7 mm spark plug • check periodically. - the standard spark gap is 0.6 to 0.7 mm. - correct the spark gap if it is wider or narrower than the standard gap. • fastening torque: 15 to 17 n·m (150 to 170 kgf·cm) zÜndkerze • von zeit zu zei...
53 cs-2700es e n g l i s h d e u t s c h i t a l i a n o magneto • the unit has cdi (capacitor discharge ignition) system, which does not require adjustment of ignition timing. • check for secure (tight) wire connections. Cylinder fins • check periodically. • clogged fins will result in poor engine ...
54 cs-2700es e n g l i s h d e u t s c h i t a l i a n o saw chain maintenance never operate a chain saw with a dull or damaged chain. If the chain requires excessive pressure to cut or produces dust instead of wood chips then inspect the cutters for damage. When sharpning the chain the objectives w...
55 cs-2700es e n g l i s h d e u t s c h i t a l i a n o 1. Lock the chain - push hand guard forward. To rotate the chain - pull hand guard against front handle. 2. Your chain will have alternative left and right hand cutters. Always sharpen from the inside out. 3. Keep the angle lines of the file h...
56 cs-2700es e n g l i s h d e u t s c h i t a l i a n o 1 3 4 5 • drive link serves to remove sawdust from the groove of the guide bar. Therefore, keep the lower edge of the drive link sharp, indicated as 5. - when setting of the chain is finished, soak it in oil and wash away filings completely be...
57 cs-2700es e n g l i s h d e u t s c h i t a l i a n o storage long term storage (over 60 days) warning danger do not store in enclosure where fuel fumes may accumulate or reach an open flame or spark. Do not store your unit for a prolonged period of time (60 days or longer) without performing pro...
58 cs-2700es e n g l i s h d e u t s c h i t a l i a n o note • for future reference, you should keep this operator’s manual. • if this operator’s manual has become illegible through impairment or is lost, please purchase a new one from your echo dealer. • when renting a machine together with this o...
59 cs-2700es e n g l i s h d e u t s c h i t a l i a n o specifications gb specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accesso...
60 cs-2700es e n g l i s h d e u t s c h i t a l i a n o technische daten d in den illustrationen sind u.U. Auch ausrüstung und zubehör abgebildet, die nicht unbedingt elemente der serienmäßigen ausrüstung sind. Die in den vorliegenden unterlagen enthaltenen spezifikationen, beschreibungen und illus...
61 cs-2700es e n g l i s h d e u t s c h i t a l i a n o cs-2700es dimensioni esterne : lunghezza × larghezza × altezza mm 380 × 220 × 230 massa : motosega senza barra e catena, serbatoi vuoti kg 3,1 volume : serbatoio carburante ml 240 serbatoio olio lubrificazione catena ml 160 carburante ( miscel...
62 cs-2700es e n g l i s h d e u t s c h i t a l i a n o declaration “ce” of conformity the undersigned manufacturer: kioritz corporation 7-2 suehirocho 1-chome ohme ; tokyo 198-8711 japan declares that the hereunder specified new unit: portable chain saw brand : echo type : cs-2700es complies with:...
63 cs-2700es e n g l i s h d e u t s c h i t a l i a n o eg-konformitätserklärung wir als hersteller: kioritz corporation 7-2 suehirocho 1-chome ohme ; tokyo 198-8711 japan erklären, dass das nachfolgende neue motorgerät: tragbare motorsÄge fabrikat : echo typ : cs-2700es den erfordernissen der eg-m...
64 cs-2700es e n g l i s h d e u t s c h i t a l i a n o gewährleistungs- und garantiebestimmungen für echo- motorgeräte verehrter kunde ! Sie haben sich zum kauf eines echo-motorgerätes entschieden und damit einen qualitativ hochwertigen und zuverlässigen helfer für ihre arbeiten erworben. Damit si...