Echo CS-352 Instruction Manual - Maintenance and Care

23

CS-352

MAINTENANCE AND CARE

IMPORTANT

Time intervals shown are maximum.

Actual use and your experience will determine

the frequency of required maintenance.

Your ECHO chain saw is designed to provide many

hours of trouble free service. Regular scheduled

maintenance will help your chain saw achieve that

goal. If you are unsure or are not equipped with the

necessary tools, you may want to take your unit to

an ECHO Service Dealer for maintenance.  To help

you decide whether you want to DO-IT-YOURSELF

or have the ECHO Dealer do it, each maintenance

task has been graded. If the task is not listed ask

your ECHO dealer for repairs.

SKILL LEVELS

Level 1 = Easy to do. Most required tools come

with unit.

Level 2 = Moderate difficulty. Some specialized

tools may be required.

ECHO offers REPOWER™ Maintenance Kits and

Parts to make your maintenance job easier. Just

below each task heading are listed the various part

numbers required for that task. Ask your ECHO

dealer for these parts.

MAINTENANCE INTERVALS

Meintenance Procedure Letter Codes:

I = Inspect

C = Clean

R = Replace

Meintenance Procedure Notes:

(1)= Low evaporative fuel tanks DO NOT require

regular maintenance to maintain emission

integrity.

* = All recommendations to replace are based

on the finding of damage or wear during

inspection.

Component/system

Maintenance procedure

Air Filter

Inspect/Clean/Replace

1

I/C*

R*

Automatic Oiler

Inspect/Adjust

1

I

Oil Filter

Inspect/Clean/Replace

1

I

I/C*

Fuel System

Inspect/Replace

1

I (1)*

I (1)*

Fuel Filter

Inspect/Replace

1

I*

I/R*

Fuel Cap Gasket

Inspect/Replace

1

I*

R*

Guide Bar and Sprocket Nose

Inspect/Clean/Lubricate

1

I/C*

I

Saw Chain

Inspect/Sharpen/Replace/

Tensioning

2

I*

Sprocket

Inspect/Replace

2

I*

Spark Plug

Inspect/Clean/Replace

1

I/C/R*

Cooling System

Inspect/Clean

2

I/C

Muffler Spark Arrestor

Inspect/Clean/Replace

2

I/C/R*

Cylinder Exhaust Port

Inspect/Clean/Decarbon

2

I/C

Recoil Starter Rope

Inspect/Clean

1

I/C*

Screws/Nuts/Bolts

Inspect/Tighten/Replace

1

I*

Every refuel

Required

Skill level

Daily or

Before use

3 Months or

90 Hours

Yearly or

600 Hours