Echo CS-590 Operator's Manual - page 4
4
CS-590
DECALS
Locate this safety decal on your unit. The complete
unit illustration found in the “NOMENCLATURE OF
PARTS” section will help you locate them.
Make sure the decal is legible and that you
understand and follow the instructions on it. If a
decal cannot be read, a new one can be ordered
from your ECHO dealer.
SYMBOL FORM
Carburetor adjustment
- Idle speed
Carburetor adjustment
- High speed mixture
Wear eyes, ears and head
protection
Carburetor adjustment
- Low speed mixture
Oil and gasoline mixture
Symbol form/shape Symbol description/application Symbol form/shape Symbol description/application
Decompression device
Chain brake operation
Chain oil pump
Chain oil fill
Emergency stop
Choke control “Cold Start”
position (choke closed)
CAUTION: For safe operation
follow all safety precautions
and instructions in Operator’s
Manual
ATTENTION
Pour un travail en sécurité, respectez toutes
les règles de sécurité et les indications du
manuel d’utilisation. (Le manuel d’utilisation
est disponibile chez votre agent ECHO.) Tenez
fermement la tronçonneuse des deux mains.
Part Number 890324-39630
TO AVOID KICKBACK
1. Contact of the guide bar tip with any
object should be avoided.
2. Tip contact may cause the guide bar to
move suddenly upward and backward
which may cause serious injury.
3. Always use two hands when operating
the chain saw.
Part Number X505-000450
CAUTION/ATTENTION
Hearing protectors meeting the requirements
of CSA Standard Z94.2 should be worn.
Les protecteurs auditifs pouvant être porter
doivent recontrer les normes CSA Standard
Z94.2.
Part Number 890176-39431
POUR ÉVITER LES REBONDISSEMENTS
1. Éviter tout contact entre le nez du
guide-chaîne et un objet quelconque.
2. Tout contact du nez peut provoquer un
mouvement brusque vers le haut ou vers
le bas et entraîner de graves blessures.
3. Toujours employer lex deux mains
pour opérer la scie à chaîne.
Part Number X505-000460
Part Number X524-004640
REPLACEMENT BAR AND CHAIN
REMPLACEMENT DU GUIDE ET DE LA CHAÎNE
GUIDE BAR P/NO.
CHAIN P/NO.
CKA
GUIDE PIÈCE NO. CHAÎNE PIÈCE NO.
18”
18D0AS3864
72LPX64CQ
41.9
20”
20D0AS3870
72LPX70CQ
31.9
CAUTION: For safe operation follow all safety
precautions and instructions in Operator’s
Manual. (Replacement manuals are available
from your ECHO dealer.) Hold chain saw
firmly with both hands.