Echo CS-620P Instruction Manual - page 18
16
CS-620P
WHEN THE ENGINE IS COLD
CAUTION
Make sure the bar and chain are free from
any obstruction when starting the chain saw.
• Movechainbrakeleverfullyforwardtolock
chain brake before starting.
• Fillthefueltankwithfuelmixture.
It is not permitted to fill fuel above the shoulder
level of fuel tank.
• Fillthechainoiltankwithlubricant.
Do not over fill.
• Moveignitionswitchto“
Run” position.
• Pressthedecompressiondevice.
• Pullchokecontrolknoballthewayout.
(Choke position )
• Securelyholdthechainsawasshownand
pull starter handle several times until first firing
sound.
• Pushchokecontrolknoballthewayin.
• Pressthedecompressiondeviceandpullstarter
handle again to start the engine.
• Whenenginestarts,immediatelysqueezeand
release throttle trigger for disengaging throttle
latch and returning engine to idle, and pull front
hand guard towards the operator immediately.
(Chain brake unlocked position)
WHEN THE ENGINE IS WARM
CAUTION
Make sure the bar and chain are free from
any obstruction when starting the chain saw.
• Movechainbrakeleverfullyforwardtolock
chain brake before starting.
• Confirmthereisfuelandchainoilinthetanks.
• Moveignitionswitchto“
Run” position.
• Pressthedecompressiondevice.
• Securelyholdthechainsawasshownandpull
starter handle.
• Chokemaybeusedifnecessary,butafterfirst
firing sound, pull throttle trigger to release choke.
• Afterstartingtheengine,pullfronthandguard
towards the operator immediately.
(Chain brake unlocked position)
Chain brake
Chain brake
Start / Run
Ignition switch
Decompression device
Start / Run
Ignition switch
Decompression device
Starter handle
Starter handle
Throttle trigger
Choke
Throttle trigger lockout
Unlock chain brake
Unlock chain brake