1. DL manuals
  2. Echo
  3. Chainsaw
  4. CS-8000
  5. Operator's Manual

Echo CS-8000 Operator's Manual

Summary of CS-8000

  • Page 1

    Operator’s manual chain saw cs-670 99922200558 sup22200558 echo power equipment (canada) 501 newbold street, london, ontario canada n6e 1k4 warning read the instructions carefully and follow the rules for safe operation. Failure to do so could result in serious injury. Cs-8000 type1-e.

  • Page 2: Rules For Safe Operation

    2 cs-8000 type1-e 1. Fatigue causes carelessness. Be more cautious before rest periods and before the end of your shift. 2. Personal protective clothing required by your safety organizations, government regulations, or your employer should be used; otherwise, sung fitting clothing, protective eyewea...

  • Page 3: Contents

    3 cs-8000 type1-e warning the safety alert symbol accompanied by the word “warning” calls attention to an act or condition which can lead to serious personal injury or death if not avoided. Circle and slash symbol this symbol means the specific action shown is prohibited. Ignoring these prohibitions...

  • Page 4: Cs-8000

    4 cs-8000 type1-e chain brake operation carefully read the instruction manual wear eyes, ears and head protection oil and gasoline mixture symbol form/shape symbol description/application chain oil fill emergency stop choke control “cold start” position (choke closed) stop symbol form to avoid kickb...

  • Page 5: Packing List

    5 cs-8000 type1-e packing list the echo product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, guide bar and saw chain installation and other assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ...

  • Page 6: Nomenclature of Parts

    6 cs-8000 type1-e nomenclature of parts 2 1 21 20 15 16 17 19 18 14 5 4 7 8 6 9 10 11 12 13 3 890191-30131 x524-001671 890191-31731 890161-31732 23 22 24 * if a decal cannot be read, a new one can be ordered from your echo dealer. Part number 890161-31732 warning!! Read and follow all safety precaut...

  • Page 7: Nomenclature of Parts

    7 cs-8000 type1-e nomenclature of parts 1. Instruction manual - included with unit. Read before operation and keep for future reference to learn proper, safe operating techniques. 2. Safety manual - describe operating and safety instructions for this chain saw. 3. Front hand guard - guard between th...

  • Page 8: Operator Safety

    8 cs-8000 type1-e vibration and cold • it is believed that a condition called raynaud’s phenomenon, which affects the fingers of certain individuals, may be brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning followed by loss of color and nu...

  • Page 9: Correct Use of Chain Brake

    9 cs-8000 type1-e spark arrestor muffler • the spark arrestor muffler controls the exhaust noise and prevents hot, glowing particles of carbon from leaving the muffler. Make sure the spark arrestor screen is in good repair and properly seated in the muffler. • certain internal combustion engines ope...

  • Page 10: Preparation For Use

    10 cs-8000 type1-e preparation for use guide bar and saw chain installation/removal warning saw chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injury may result. Note move the chain brake lever (front hand guard) fully rearward to remove or install the clutch c...

  • Page 11

    11 cs-8000 type1-e guide bar clutch adjustment hole chain clutch cover nuts 5. Mount guide bar on studs and slide toward clutch to make saw chain installation easier. Install chain with cutters on top of guide bar facing forward. 6. Slide bar forward and ensure tensioner pin fits into lower adjustme...

  • Page 12: Fuel and Lubricant

    12 cs-8000 type1-e fuel and lubricant fuel statement gasoline - use 89 octane [(r+m)/2] (mid grade or higher) gasoline or gasohol known to be good quality. Gasohol may contain up to 10 % ethyl (grain) alcohol or 15 % mtbe (methyl teriary-butyl ether). Gasohol containing methyl (wood) alcohol is not ...

  • Page 13

    13 cs-8000 type1-e handling fuel mixing instructions - 1. Fill an approved fuel container with half of the required amount of gasoline. 2. Add the proper amount of two-stroke oil to gasoline. 3. Close container and shake to mix oil with gasoline. 4. Add remaining gasoline, close fuel container, and ...

  • Page 14: Operation

    14 cs-8000 type1-e oil tank cap fuel tank cap cap indication fuel/oil tanks are indicated by the following illustrations on the caps. Chain lubricant proper lubrication of the chain while in operation reduces the friction between the chain and the guide bar to a minimum and assures a longer service ...

  • Page 15

    15 cs-8000 type1-e when the engine is warm • move chain brake lever fully forward to lock chain brake before starting. • confirm there is fuel and chain oil in the tanks. • move ignition switch to “run” position. • securely hold the chain saw as shown and pull starter handle. • choke may be used if ...

  • Page 16

    16 cs-8000 type1-e stop ignition switch running • when engine starts, keep idling for a few minutes. • set the brake lever in the unlocked position before starting to cut. • pull throttle trigger gradually and increase revolution of the engine. • the chain starts running when the engine reaches 3800...

  • Page 17: Cutting Instruction

    17 cs-8000 type1-e cutting instruction general caution • read the echo “chain saw safety manual” included with your chain saw for additional cutting and safety instructions. • wear suitable hearing protection such as earmuffs or earplugs to protect against objectionable or uncomfortable loud noises....

  • Page 18

    18 cs-8000 type1-e felling the tree a falling tree can seriously damage anything it may hit - a car, a house, a fence, a power-line, or another tree. There are ways to make a tree fall where you want it, so first decide where that is! Before cutting, clear the area around the tree. You will need goo...

  • Page 19

    19 cs-8000 type1-e limbing limbing a fallen tree is much the same as bucking. Never stand on the tree that you are limbing. When limbing, caution is the word. Be careful of the tip touching other limbs. Always use both hands. Don’t cut with the saw overhead or aligned vertically with your body. If t...

  • Page 20

    20 cs-8000 type1-e chain brake function when the lever is pushed forward, chain brake instantly stops the chain. Chain brake unlock when the lever is fully pulled, toward the operator, brake is unlocked. Kickback kickback motion chain brake operation • set the lever in the unlocked position before s...

  • Page 21

    21 cs-8000 type1-e chain and guide bar combination the following combinations are recommended for model cs-8000 type1-e. @ standard configuration guide bar saw chain length echo part no. Pitch type links mm (in) double guard symmetrical mm (in) oregon 508 (20) 20d0pd3870 20d0ps3870 9.53 (3/8) 72lp, ...

  • Page 22: Maintenance and Care

    22 cs-8000 type1-e component/ maintenance system procedure recommended echo dealer maintenance procedures cylinder exhaust port inspect/clean/decarbon 3 i/c do-it-yourself maintenance procedures air filter inspect/clean/replace 1 i/c r* automatic oiler inspect/adjust 1 i oil filter inspect/replace 1...

  • Page 23

    23 cs-8000 type1-e carburetor adjustment every unit is run at the factory and the carburetor is set in compliance with emission regulations. In addition, the carburetor is equipped with “h” (high speed) and “l” (low speed) needle adjustment limiters that prevent settings outside acceptable limits. 1...

  • Page 24

    24 cs-8000 type1-e 0.65 mm (0.026 in.) air filter • check before every use. • loosen cleaner cover knob and remove air cleaner cover and filter. • brush off dust lightly, or wash it in suitable cleanig fluid if necessary, or replace the air filter. • dry it completely before installation. • reinstal...

  • Page 25

    25 cs-8000 type1-e guide bar • clean before using. - clean the groove of the guide bar with a small screwdriver. - clean oil holes with a wire. • check sprocket and the clutch and clean the bar mount area before installation of the bar. Replace either or both if worn. Sprocket • a damaged sprocket w...

  • Page 26: Setting The  Saw  Chain

    26 cs-8000 type1-e setting the saw chain sharpen lower edge drive link tie strap right hand cutter preset tie strap left hand cutter guard link top plate side plate depth guage important points for proper maintenance of saw chain: • keep the cutters sharp at all times. • keep the left and the right ...

  • Page 27

    27 cs-8000 type1-e note these angles are referred to as oregon 72lp or 72lgx. To sharpen other follow chain manufacturer’s instruction. • place the depth gauge tool firmly on guide bar so that depth gauge protrudes. Then file top of depth gauge with the flat file until flat with top of the depth gau...

  • Page 28: Troubleshooting

    28 cs-8000 type1-e troubleshooting problem engine — hard to start cause remedy — does not start engine fuel at no fuel • fuel filter clogged • clean or replace cranks carburetor at carburetor • fuel line clogged • clean • carburetor • ask your echo dealer fuel at no fuel at • carburetor • ask your e...

  • Page 29: Storage After Use

    29 cs-8000 type1-e cs-8000 type1-e dimension l × w × h mm 421 × 244 × 311 (15.5 in. × 9.6 in. × 10.9 in.) mass power head, dry kg 7.5 (16.5 lb.) without chain and guide bar engine type air-cooled two-stroke single cylinder displacement ml (cm³) 80.7 (4.924 cu. In.) carburetor diaphragm type magneto ...

  • Page 30

    30 cs-8000 type1-e notes.

  • Page 31

    31 cs-8000 type1-e notes.

  • Page 32

    Dealer? Call 1-800-432-echo 1-800-432-3246 or www.Echo-usa.Com consumer product support 1-800-673-1558 8:30 - 4:30 mon - fri c.S.T. Echo, incorporated 400 o akwood r oad l ake z urich , il 60047 www.Echo-usa.Com additional or replacement manuals safety manuals in english/spanish or english/french ar...