Echo CS-800P Operator's Manual - page 16
16
CS-800P
Unlock chain brake
Choke control knob
Choke open
Unlock chain brake
Starter handle
Start / Run
Ignition switch
Chain brake
WHEN THE ENGINE IS COLD
CAUTION
Make sure the bar and chain are free from
any obstruction when starting the chain saw.
• Movechainbrakeleverfullyforwardtolock
chain brake before starting.
• Fillthefueltankwithfuelmixture.
It is not permitted to fill fuel above the shoulder
level of fuel tank.
• Fillthechainoiltankwithlubricant.
Do not over fill.
• Moveignitionswitchto“Run” position.
• Pullchokecontrolknoballthewayout.
(Choke position )
• Securelyholdthechainsawasshownand
pull starter handle several times until first firing
sound.
• Pushchokecontrolknoballthewayin.
• Pullstarterhandleagaintostarttheengine.
• Whenenginestarts,immediatelysqueezeand
release throttle trigger for disengaging throttle
latch and returning engine to idle, and pull front
hand guard towards the operator immediately.
(Chain brake unlocked position)
WHEN THE ENGINE IS WARM
CAUTION
Make sure the bar and chain are free from
any obstruction when starting the chain saw.
• Movechainbrakeleverfullyforwardtolock
chain brake before starting.
• Confirmthereisfuelandchainoilinthetanks.
• Moveignitionswitchto“Run” position.
• Securelyholdthechainsawasshownandpull
starter handle.
• Chokemaybeusedifnecessary,butafterfirst
firing sound, pull throttle trigger to release choke.
• Afterstartingtheengine,pullfronthandguard
towards the operator immediately.
(Chain brake unlocked position)
Choke control knob
Choke
Chain brake