1. DL manuals
  2. Echo
  3. Vacuum Cleaner
  4. ES-230
  5. Operator's Manual

Echo ES-230 Operator's Manual

Manual is about: SHRED 'N' VAC

Summary of ES-230

  • Page 1

    Shred 'n' vac ® operator's manual model es-230 serial number 05001001 - 05009116 warning danger read rules for safe operation and all instructions carefully. Echo provides this operator's manual which must be read and understood for proper and safe operation. X753000390 03/03 x7531130400

  • Page 2

    2 t able of c ontents introduction ............................................................... 2 - the operator's manual ....................................... 2 manual safety symbols and important information .. 3 safety ............................................................................

  • Page 3: 'N' V

    3 s hred 'n' v ac ® o perator ' s m anual important note m anual s afety s ymbols and i mportant i nformation throughout this manual and on the product itself, you will find safety alerts and helpful, information messages preceded by symbols or key words. The following is an explanation of those sym...

  • Page 4

    4 international symbols s afety i nstructions personal condition and safety equipment warning danger shred 'n' vac® users risk injury to themselves and others if the shred 'n' vac® is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when operat...

  • Page 5: 'N' V

    5 s hred 'n' v ac ® o perator ' s m anual extended operation / extreme conditions vibration and cold -- it is believed that a condition called raynaud’s phenomenon, which affects the fingers of certain individuals may be brought about by exposure to vibration and cold. Exposure to vibration and cold...

  • Page 6

    6 safe operation warning danger do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. • review area to be cleared. Look for potential hazards such as stones or metal objects. • spectators and fellow...

  • Page 7: 'N' V

    7 s hred 'n' v ac ® o perator ' s m anual d escription contents 1 - power head 1 - blower pipe assembly 1 - shred 'n' vac ® suction tube 1 - elbow pipe 1 - debris bag 1 - operator's manual 1 - warranty registration card 1 - echo emissions and warranty statement 1 - t-wrench 1- echo power blend tm 2-...

  • Page 8

    8 s pecifications model ----------------------------------------------------- es-230 shred 'n' vac © length ------------------------------------------------------- 335 mm (13.2 in.) (w/o blower pipes) width (w/rear handle) ------------------------------------- 305 mm (12.0 in.) height --------------...

  • Page 9: 'N' V

    9 s hred 'n' v ac ® o perator ' s m anual vacuum / shred ' n ' vac © install vacuum tube and bag assembly 1. Turn knob (a) counter clockwise until hinged housing cover is free to open for vacuum tube installation. 2. While holding housing cover open. Install vacuum tube into blower housing with beve...

  • Page 10

    10 4. Align grooves in discharge elbow with pegs on blower, and slide elbow (d) on to blower. Turn elbow counterclockwise to lock in place. Elbow must angle back toward operator position as shown. 5. Place debris bag opening over flared end of elbow, and cinch bag (e) securely with velcro strap. D e.

  • Page 11: 'N' V

    11 s hred 'n' v ac ® o perator ' s m anual p re -o peration fuel fuel requirements gasoline - use 89 octane [ r+m/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 15% mtbe (methyl tertiary-butyl ether). Gasohol containing methyl (wood) alcohol is not approved. T...

  • Page 12

    12 o peration starting cold engine 1. Stop switch move stop switch button (a) away from the stop position. 2. Throttle position lever move throttle position lever (b) forward to idle position. 3. Choke move choke (c) to cold start ( ) position. 4. Primer bulb pump primer bulb (d) until fuel is visib...

  • Page 13: 'N' V

    13 s hred 'n' v ac ® o perator ' s m anual starting warm engine 1. Stop switch move stop switch button (a) away from the stop position. 2. Throttle position lever move throttle position lever (b) forward to idle position. 3. Recoil starter place the blower on a flat, clear area. Firmly grasp throttl...

  • Page 14

    14 blower operation warning danger always wear safety glasses, hearing protection and a face filter mask or serious personal injury may result. . Do not point the blower pipe in the direction of people or pets. Never operate unit without either housing cover grill or vacuum tube installed on unit se...

  • Page 15: 'N' V

    15 s hred 'n' v ac ® o perator ' s m anual shred ' n ' vac ® operation warning danger flying debris hazard. Never operate unit as a vacuum unless discharge elbow is installed and debris bag is securely cinched to elbow. Failure to follow instructions can result in serious injuries. 1. Adjust debris ...

  • Page 16

    16 m aintenance your echo blower is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your blower achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an echo service dealer for maintenance....

  • Page 17: 'N' V

    17 s hred 'n' v ac ® o perator ' s m anual air filter level 1. Tools required: 25-50 mm (1-2 in.) medium bristle brush. Parts required: 90030 repower tm air and fuel filter kit note clean daily. 1. Close choke (cold start position). This prevents dirt from entering the carburetor throat when the air...

  • Page 18

    18 spark plug level 2. Tools required: 3/4 in. Spark plug deep socket, feeler gauge (preferably a wire gauge), parts required: 90074 repower tm tune up kit 1. Remove spark plug and check for fouling, worn and rounded center electrode. 2. Clean the plug or replace with a new one. Do not sand blast to...

  • Page 19: 'N' V

    19 s hred 'n' v ac ® o perator ' s m anual cleaning cylinder fins 1. Remove four 3 mm hex screws, side handle and recoil starter. 2. Remove engine cover (four screws), pull cover away from engine. Clean cylinder fins to allow cooling air to pass freely. 3. Loosely reassemble engine cover then recoil...

  • Page 20

    20 3. Remove spark arrestor covers (a, b), gasket (c), and spark arrestor screen (d) from muffler. Replace screen if plugged with carbon deposits. 4. Install spark arrestor screen, gaskets, and cover. 5. Loosely reassemble engine cover then recoil starter and side handle. 6. Tighten all screws secur...

  • Page 21: 'N' V

    21 s hred 'n' v ac ® o perator ' s m anual debris bag level 1. Parts required: none shake dust from bag and inspect for hole or tears. Inspect zipper and clean debris from teeth to assure complete closing of zipper. Carburetor adjustment engine break-in new engines must be operated a minimum duratio...

  • Page 22

    22 warning danger fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition spark by ground- ing spark plug against cylinder, otherwise serious personal injury may result. E ngine t roubleshooting t r a h c g n i t o o h s e l b u o r t m e l b o r p k c e h c ...

  • Page 23: 'N' V

    23 s hred 'n' v ac ® o perator ' s m anual warning danger during operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result. 2. ...

  • Page 24

    Dealer? Call 1-800-432-echo or www.Echo-usa.Com consumer product support 1-800-673-1558 8:30 - 4:30 mon - fri c.S.T. Echo, incorporated 400 o akwood r oad l ake z urich , il 60047-1564 www.Echo-usa.Com s ervicing i nformation parts genuine echo parts and echo repower™ parts and assemblies for your e...