1. DL manuals
  2. Echo
  3. Trimmer
  4. HC-155
  5. Operator's Manual

Echo HC-155 Operator's Manual

Other manuals for HC-155: Operator's Manual, Operator's Manual

Summary of HC-155

  • Page 1

    Hedge clipper operator's manual model hc-155 warning read rules for safe operation and all instructions carefully. Echo provides this operator's manual and a safety manual. Both must be read and under- stood for proper and safe operation. X7502256702 x750011602 01/10

  • Page 2: ’

    2 i ntroduction welcome to the echo family. This echo product was designed and manufactured to provide long life and on-the- job dependability. Read and understand this manual. You will find it easy to use and full of helpful operating tips and safety messages. The operator ’ s manual read and under...

  • Page 3

    H edge c lipper o perator ' s m anual 3 international symbols s afety manual safety symbols and important information throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages pre- ceded by symbols or key words. The following is an explanation ...

  • Page 4

    4 warning users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when operating unit. Personal condition and safety equipment physical condition your judgment and physical dext...

  • Page 5

    H edge c lipper o perator ' s m anual 5 danger do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read the manuals • provide all users of this equipment with the operator’s manual and safety manu...

  • Page 6

    6 equipment check warning use only echo approved attachments. Serious injury may result from the use of a non-approved attachment com- bination. Echo, inc. Will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by echo. Read and...

  • Page 7

    H edge c lipper o perator ' s m anual 7 d escription locate the safety decals on your unit. Make sure the decals are legible and that you understand and follow the instruc- tions on them. If a decal cannot be read, a new one can be ordered from your echo dealer. See parts ordering instructions for s...

  • Page 8

    8 1. Front handle with guard - comfortable, textured finish provides anti-slip grip. Guard protects hand from the blades. Warning decals are located on guard. 2. Blades - double reciprocating blades mounted to a blade support bar. The blades are double sided, capable of cut- ting on either side. 3. ...

  • Page 9

    H edge c lipper o perator ' s m anual 9 1 - hedge clipper assembly 1 - operator’s manual 1 - safety manual 1 - warranty registration card 1 - blade cover c ontents after opening the carton, check for damage. Immediately notify your retailer or echo dealer of damaged or missing parts. Use the content...

  • Page 10

    10 blade stiffener removal 1. Move stop switch to stop position. 2. Disconnect spark plug wire. Warning hedge clipper blades are very sharp. Touching them may lead to severe personal injury. Use a socket and extension when remov- ing locknuts in order to keep hands at a safe distance from sharp blad...

  • Page 11

    H edge c lipper o perator ' s m anual 11 notice: use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the storage section of this manual. Warning a...

  • Page 12

    12 mixing instructions 1. Fill an approved fuel container with half of the required amount of gasoline. 2. Add the proper amount of 2-stroke oil to gasoline. 3. Close container and shake to mix oil with gasoline. 4. Add remaining gasoline, close fuel container, and remix. Important spilled fuel is a...

  • Page 13

    H edge c lipper o perator ' s m anual 13 a starting cold engine warning hedge clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades whenever possible, and always wear gloves to protect hands. Note the blade cover is used for transportation and storage...

  • Page 14

    14 starting warm engine the starting procedure is the same as cold start except do not close the choke. Warning the blades must not move at idle, otherwise serious personal injury may result. Periodic carburetor adjustment may be necessary to assure blades do not move at idle. If blades move, readju...

  • Page 15

    H edge c lipper o perator ' s m anual 15 warning hedge clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades whenever possible, and always wear gloves to protect hands. 1. Always grip front and rear handles. 2 hold trimmer firmly and squeeze throttle ...

  • Page 16

    16 maintenance intervals skill levels level 1 = easy to do. Common tools may be required. Level 2 = moderate difficulty. Some specialized tools may be required. Echo offers repower tm maintenance kits and parts to make your maintenance job easier. Component/system maintenance procedure skill level r...

  • Page 17

    H edge c lipper o perator ' s m anual 17 air filter level 1. Tools required: 25 or 50 mm (1 or 2 in.) cleaning brush parts required: repower tm air & fuel filter kit. 1. Close choke (cold start position [ ]). This prevents dirt from entering the carburetor throat when the air filter is removed. Brus...

  • Page 18

    18 spark plug level 2. Tools required: t-wrench, feeler gauge, soft metal brush parts required: repower tm tune-up kit important use only ngk bpm-8y spark plug (bpmr-8y in canada) other- wise severe engine damage may occur. 1. Remove spark plug and check for fouling, worn and rounded center electrod...

  • Page 19

    H edge c lipper o perator ' s m anual 19 1. Remove spark plug lead. 2. Remove muffler cover (2 screws). 3. Remove starter cover (7 screws). 4. Use brush to remove dirt from cylinder fins. Important do not use a metal scraper to remove dirt from the cylinder fins. 5. Assemble components in reverse or...

  • Page 20

    20 exhaust port cleaning level 2 tools required: 3 mm hexagon wrench, wood or plastic scraper parts required: as needed: heat shield 1. Remove spark plug lead from spark plug, and remove engine cover (4 screws). 2. Place piston at top dead center. Remove muffler (a), heat shield (b), and eyeplate (c...

  • Page 21

    H edge c lipper o perator ' s m anual 21 important if the engine is adjusted for operation above 1,100 feet asl, the carburetor must be re-adjusted when operating the engine below 1,100 feet asl, otherwise severe engine damage may result. Level 2. Tools required: screwdriver, tachometer (echo p/n 99...

  • Page 22

    22 1. Move stop switch to stop position. 2. Disconnect spark plug wire from spark plug. 3. Brush loose debris from blade and coat both sides of blade with the 50-50 cleaning mixture. 4. Allow cleaning mixture to soften the remaining gummy residue then wipe it from the blade. 5. Apply clean oil to th...

  • Page 23

    H edge c lipper o perator ' s m anual 23 sharpening blades level 2. Tools required: 8 mm socket & extension, 4mm hex wrench w/ extension, flat file, screwdriver parts required: none warning hedge clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades w...

  • Page 24

    24 a blade adjustment level 2. Tools required: 8 mm socket & extension, 4mm hex wrench w/ extension 1. Move stop switch to stop position. 2. Disconnect spark plug wire. Warning hedge clipper blades are very sharp. Touching them may lead to severe personal injury. Use long hex wrenches and sockets wi...

  • Page 25

    H edge c lipper o perator ' s m anual 25 danger fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition spark by ground- ing spark plug near cylinder plug hole, otherwise serious personal injury may result. T roubleshooting t r a h c g n i t o o h s e l b u o...

  • Page 26

    26 s torage warning during operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious personal injury may result. Long term storage (over 30 days) do not store your unit for ...

  • Page 27

    H edge c lipper o perator ' s m anual 27 model ------------------------------------------hc-155 length ---------------------------------------------1,154 mm (45.4 in.) width ----------------------------------------------272 mm (10.7 in.) height ---------------------------------------------201mm (7.9...

  • Page 28

    28 w arranty s tatements echo limited warranty statement for product sold in usa and canada beginning 01/01/2010 echo's responsibility echo incorporated’s limited warranty, provides to the original purchaser that this echo product is free from defects in material and workmanship. Under normal use an...

  • Page 29

    H edge c lipper o perator ' s m anual 29 purchased repair parts, short blocks and accessories • 90-day residential, or non-income producing warranty • 30-day commercial, institutional, agricultural, industrial, income producing, or rental application warranty attention two-stroke engine power produc...

  • Page 30

    30 echo incorporated emission control warranty statement for echo and shindaiwa brands the environmental protection agency (epa) and the california air resources board (c.A.R.B.) and echo incorporated (echo inc.) are pleased to explain the emission control system warranty on your 2010 and later equi...

  • Page 31

    H edge c lipper o perator ' s m anual 31 notes.

  • Page 32

    Echo, incorporated 400 o akwood r oad l ake z urich , il 60047 www.Echo-usa.Com s68011001001/s68011999999 s76212001001/s76212999999 dealer? Call 1-800-432-echo 1-800-432-3246 or www.Echo-usa.Com consumer product support 1-800-673-1558 8:30 - 4:30 m on - f ri c.S.T. S ervicing i nformation parts / se...