Echo Massager Pro User Manual - Troubleshooting
Troubleshooting
Screen is on, but no sensation is felt in the electrode pads.
Ensure that the lock key is off, the lead wire is fully inserted into the port, 2
electrode pads are connected to the wire and both pads are attached to bare
skin on the same body part. Increase intensity gradually.
Device does not turn on or the screen is dim.
Battery is low, needs to be charged/recharged.
One pad feels stronger than the other.
Reposition pads by moving them around for the most comfortable sensation.
However, this is entirely normal, as different areas have different sensitivity.
During use there is a burning, stinging sensation from the pads or they do not
stick well to the skin.
Try cleaning them with plain water, reposition pads to a muscular area, not
directly on bone. If still no change, it may be time to replace the electrode pads.
Contact local supplier/ visit us at www.echomassager.com to order replacements.
Did not provide adequate relief.
Being a drug-free stimulation highly dependent of individual factors, it may
require longer/extended use. We recommend daily use, several times per day,
20-60 minutes per session.